[Sun Oct 30 08:09:48 2011] Detection parameters:
  Position = (568.7, 240.4) = 8 48 25.24 44 48 9.9
  Extent = 2.8" x 2.1", rotation angle = 140 degrees
  Source counts = 67.6 +/- 9.0
  Background counts = 13.4
  Rate = 0.001 +/- 0.0001

[Sun Oct 30 08:09:49 2011] Off-axis axis estimate = 8.31'
[Sun Oct 30 08:11:07 2011] Using EEF radius (= 3.05 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 08:11:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 08:11:07 2011] Initial guess for spatial extent in simple fitting = 3.05"
[Sun Oct 30 08:11:07 2011] source mask rpix=6.2, npix_max = 179, mask sum = 168, frac = 0.937
[Sun Oct 30 08:11:07 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 3.05"
[Sun Oct 30 08:11:07 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass0_src6.ximg exists
[Sun Oct 30 08:11:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01708_pi14-548_cl_pass0_src6.csv
[Sun Oct 30 08:11:07 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Oct 30 08:11:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01708_pi14-548_cl_pass0_src6.csv
[Sun Oct 30 08:11:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01708_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01708_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 08:11:09 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Oct 30 08:11:09 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Oct 30 08:11:09 2011] Fit fullrun_ccd0_acisf01708_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Oct 30 08:11:23 2011] Spatial fit model total counts = 96.913400, observed total counts = 96.000000
[Sun Oct 30 08:11:23 2011] Offset between fit and detection position for source 6 = 0.556827 pixels
[Sun Oct 30 08:11:23 2011] 96.871300 total counts/ 22.879000 bgd. counts: snr = 15.469205
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.556827 pixels
  Position = (568.8, 239.9) = 8 48 25.26 44 48 9.3
  Extent = 2.7 (2.3-3.3)", rotation angle = 0
  Source counts = 74.0 +/- 9.8
  Background counts = 22.9
  Rate = 0.001 +/- 0.0002
[Sun Oct 30 08:11:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 08:11:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 08:11:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 08:11:23 2011] Source does appear to be extended
[Sun Oct 30 08:11:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 08:11:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 08:11:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 08:11:53 2011] Initial guess for spatial extent in simple fitting = 2.74"
[Sun Oct 30 08:11:53 2011] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.979
[Sun Oct 30 08:11:53 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 2.74"
[Sun Oct 30 08:11:53 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass1_src6.ximg exists
[Sun Oct 30 08:11:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01708_pi14-548_cl_pass1_src6.csv
[Sun Oct 30 08:11:53 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Oct 30 08:11:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01708_pi14-548_cl_pass1_src6.csv
[Sun Oct 30 08:11:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01708_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01708_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 08:11:54 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Oct 30 08:11:54 2011] fullrun_ccd0_acisf01708_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Oct 30 08:11:54 2011] Fit fullrun_ccd0_acisf01708_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Oct 30 08:12:05 2011] Spatial fit model total counts = 89.246600, observed total counts = 90.000000
[Sun Oct 30 08:12:05 2011] Offset between fit and detection position for source 6 = 0.379071 pixels
[Sun Oct 30 08:12:05 2011] 89.466100 total counts/ 13.483500 bgd. counts: snr = 20.692494
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.379071 pixels
  Position = (568.4, 240.0) = 8 48 25.27 44 48 9.4
  Extent = 2.9 (2.3-3.5)", rotation angle = 0
  Source counts = 76.0 +/- 9.5
  Background counts = 13.5
  Rate = 0.001 +/- 0.0002
[Sun Oct 30 08:12:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 08:12:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 08:12:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 08:12:05 2011] Source does appear to be extended
[Sun Oct 30 08:12:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 08:12:32 2011] Not overwriting source region fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.reg
[Sun Oct 30 08:12:32 2011] Extracting stamp from image fullrun_ccd0_acisf01708_pi14-548_cl_sm2.00.img.gz, (436, 107) - (701, 373)
[Sun Oct 30 08:12:32 2011] Writing fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6.gif
[Sun Oct 30 08:12:48 2011] ../../acisf01708/products/events/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.evt and ../../acisf01708/products/events/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Oct 30 08:12:48 2011] Size of ../../acisf01708/products/events/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.evt.gz[events] = 89 counts
[Sun Oct 30 08:12:48 2011] Mean chipx,y = (634.51, 170.70)
[Sun Oct 30 08:12:48 2011] Mean tdetx,y = (3231.70, 4497.49)
[Sun Oct 30 08:12:48 2011] chipx,y range = (611.00-659.00, 141.00-203.00)
[Sun Oct 30 08:12:48 2011] Size of ../../acisf01708/products/events/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 189 counts
[Sun Oct 30 08:12:48 2011] ../../acisf01708/products/images/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.img and ../../acisf01708/products/images/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Oct 30 08:12:48 2011] ../../acisf01708/products/spectra/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.pi and ../../acisf01708/products/spectra/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Oct 30 08:12:48 2011] Not generating rmf since there are only 75 counts
[Sun Oct 30 08:12:51 2011] ../../acisf01708/products/lightcurves/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.lc and ../../acisf01708/products/lightcurves/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Oct 30 08:13:29 2011] 172.968
[Sun Oct 30 08:17:21 2011] Updating aperture counts using extracted products
[Sun Oct 30 08:17:21 2011] Error reading totcts from fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 30 08:17:21 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 08:17:21 2011] Using photon index=1.80, rate=0.00124, arf fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6.arf
[Sun Oct 30 08:17:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 08:17:21 2011] Updating source flux to 1.5e-14
[Sun Oct 30 08:17:27 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 08:17:31 2011] acisf01708/analysis//spectral/fullrun_ccd0_acisf01708_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete