[Wed Oct 19 08:12:23 2011] Detection parameters:
  Position = (795.6, 1110.8) = 10 34 29.64 57 52 16.9
  Extent = 1.1" x 0.8", rotation angle = 72 degrees
  Source counts = 67.7 +/- 8.7
  Background counts = 8.3
  Rate = 0.0009 +/- 0.0001

[Wed Oct 19 08:12:24 2011] Off-axis axis estimate = 7.19'
[Wed Oct 19 08:13:34 2011] Using EEF radius (= 2.30 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 08:13:34 2011] Initial guess for spatial extent in simple fitting = 2.30"
[Wed Oct 19 08:13:34 2011] source mask rpix=4.7, npix_max = 106, mask sum = 110, frac = 1.029
[Wed Oct 19 08:13:34 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 2.30"
[Wed Oct 19 08:13:35 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src8.ximg exists
[Wed Oct 19 08:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src8.csv
[Wed Oct 19 08:13:35 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Oct 19 08:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src8.csv
[Wed Oct 19 08:13:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 08:13:36 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Oct 19 08:13:36 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Oct 19 08:13:36 2011] Fit fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Oct 19 08:13:55 2011] Spatial fit model total counts = 78.976800, observed total counts = 80.000000
[Wed Oct 19 08:13:55 2011] Offset between fit and detection position for source 28 = 0.657144 pixels
[Wed Oct 19 08:13:55 2011] 78.765700 total counts/ 22.037200 bgd. counts: snr = 12.084344
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.657144 pixels
  Position = (796.2, 1111.0) = 10 34 29.63 57 52 16.7
  Extent = 1.5 (1.0-1.9)", rotation angle = 0
  Source counts = 56.7 +/- 8.9
  Background counts = 22.0
  Rate = 0.0008 +/- 0.0001
[Wed Oct 19 08:13:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 08:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 08:13:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 08:13:55 2011] Source does appear to be extended
[Wed Oct 19 08:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 08:14:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 08:14:26 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Wed Oct 19 08:14:26 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Wed Oct 19 08:14:26 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 1.47"
[Wed Oct 19 08:14:27 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src8.ximg exists
[Wed Oct 19 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src8.csv
[Wed Oct 19 08:14:27 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src8_1.ximg exists
[Wed Oct 19 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src8.csv
[Wed Oct 19 08:14:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 08:14:28 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Wed Oct 19 08:14:28 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Oct 19 08:14:28 2011] Fit fullrun_ccd3_acisf01698_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Oct 19 08:14:47 2011] Spatial fit model total counts = 67.998800, observed total counts = 68.000000
[Wed Oct 19 08:14:47 2011] Offset between fit and detection position for source 28 = 0.740155 pixels
[Wed Oct 19 08:14:47 2011] 66.990800 total counts/ 26.086800 bgd. counts: snr = 8.008577
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.740155 pixels
  Position = (796.4, 1111.8) = 10 34 29.62 57 52 17.1
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 40.9 +/- 8.2
  Background counts = 26.1
  Rate = 0.0006 +/- 0.0001
[Wed Oct 19 08:14:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 08:14:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 08:14:47 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 08:14:47 2011] Source does appear to be extended
[Wed Oct 19 08:14:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 08:25:54 2011] Not overwriting source region fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.reg
[Wed Oct 19 08:25:54 2011] Extracting stamp from image fullrun_ccd3_acisf01698_pi14-548_cl_sm2.00.img.gz, (751, 1066) - (842, 1158)
[Wed Oct 19 08:25:54 2011] Writing fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28.gif
[Wed Oct 19 08:26:45 2011] ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.evt and ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Wed Oct 19 08:26:45 2011] Size of ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.evt.gz[events] = 59 counts
[Wed Oct 19 08:26:45 2011] Mean chipx,y = (808.81, 131.64)
[Wed Oct 19 08:26:45 2011] Mean tdetx,y = (5000.36, 3869.81)
[Wed Oct 19 08:26:45 2011] chipx,y range = (788.00-825.00, 113.00-154.00)
[Wed Oct 19 08:26:45 2011] Size of ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 48 counts
[Wed Oct 19 08:26:45 2011] ../../acisf01698/products/images/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.img and ../../acisf01698/products/images/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Wed Oct 19 08:26:45 2011] Not generating rmf since there are only 40 counts
[Wed Oct 19 08:26:45 2011] arf not found, will run specextract
[Wed Oct 19 08:26:47 2011] ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_bkg.pi not found
[Wed Oct 19 08:26:47 2011] ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28.warf not found
[Wed Oct 19 08:26:47 2011] ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28.wrmf not found
[Wed Oct 19 08:26:47 2011] Removal of ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28.soff failed
[Wed Oct 19 08:26:47 2011] Failed to rename ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_grp.pi to ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.pi
[Wed Oct 19 08:26:52 2011] ../../acisf01698/products/lightcurves/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.lc and ../../acisf01698/products/lightcurves/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Wed Oct 19 08:30:17 2011] No arf file found
[Wed Oct 19 08:31:42 2011] Updating aperture counts using extracted products
[Wed Oct 19 08:31:42 2011] Error reading totcts from fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_src.pi
[Wed Oct 19 08:31:42 2011] No arf file for this source, not re-computing flux
[Wed Oct 19 08:31:51 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 08:31:52 2011] acisf01698/analysis//spectral/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete