[Wed Oct 19 08:12:22 2011] Detection parameters:
  Position = (942.5, 717.3) = 10 34 20.55 57 49 3.4
  Extent = 0.5" x 0.5", rotation angle = 180 degrees
  Source counts = 12.4 +/- 3.6
  Background counts = 0.6
  Rate = 0.0002 +/- 5e-05

[Wed Oct 19 08:12:24 2011] Off-axis axis estimate = 3.89'
[Wed Oct 19 08:13:34 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 08:13:34 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Wed Oct 19 08:13:34 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.110
[Wed Oct 19 08:13:34 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.80"
[Wed Oct 19 08:13:35 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src28.ximg exists
[Wed Oct 19 08:13:35 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src28.csv
[Wed Oct 19 08:13:35 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src28_1.ximg exists
[Wed Oct 19 08:13:35 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src28.csv
[Wed Oct 19 08:13:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01698_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 08:13:36 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Wed Oct 19 08:13:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src28.csv
[Wed Oct 19 08:13:36 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Oct 19 08:13:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src28.csv
[Wed Oct 19 08:13:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01698_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 08:13:55 2011] Spatial fit model total counts = 14.538300, observed total counts = 16.000000
[Wed Oct 19 08:13:55 2011] Offset between fit and detection position for source 20 = 0.714954 pixels
[Wed Oct 19 08:13:55 2011] 14.891730 total counts/ 2.949330 bgd. counts: snr = 6.953924
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.714954 pixels
  Position = (943.0, 717.8) = 10 34 20.55 57 49 3.4
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 11.9 +/- 3.9
  Background counts = 2.9
  Rate = 0.0002 +/- 5e-05
[Wed Oct 19 08:13:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 08:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 08:13:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 08:13:55 2011] Source does appear to be extended
[Wed Oct 19 08:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 08:14:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 08:14:26 2011] Initial guess for spatial extent in simple fitting = 0.35"
[Wed Oct 19 08:14:26 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.684
[Wed Oct 19 08:14:26 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.35"
[Wed Oct 19 08:14:27 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src28.ximg exists
[Wed Oct 19 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src28.csv
[Wed Oct 19 08:14:27 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src28_1.ximg exists
[Wed Oct 19 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src28.csv
[Wed Oct 19 08:14:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01698_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 08:14:28 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Wed Oct 19 08:14:28 2011] fullrun_ccd3_acisf01698_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Oct 19 08:14:28 2011] Fit fullrun_ccd3_acisf01698_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Oct 19 08:14:47 2011] Spatial fit model total counts = 15.122100, observed total counts = 16.000000
[Wed Oct 19 08:14:47 2011] Offset between fit and detection position for source 20 = 0.025569 pixels
[Wed Oct 19 08:14:47 2011] 15.453870 total counts/ 3.326970 bgd. counts: snr = 6.648526
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.025569 pixels
  Position = (943.0, 717.8) = 10 34 20.54 57 49 3.4
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 12.1 +/- 3.9
  Background counts = 3.3
  Rate = 0.0002 +/- 5e-05
[Wed Oct 19 08:14:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 08:14:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 08:14:47 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 08:14:47 2011] Source does appear to be extended
[Wed Oct 19 08:14:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 08:25:54 2011] Not overwriting source region fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.reg
[Wed Oct 19 08:25:54 2011] Extracting stamp from image fullrun_ccd3_acisf01698_pi14-548_cl_sm2.00.img.gz, (928, 703) - (958, 732)
[Wed Oct 19 08:25:54 2011] Writing fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20.gif
[Wed Oct 19 08:29:04 2011] ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.evt and ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Oct 19 08:29:04 2011] Size of ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.evt.gz[events] = 13 counts
[Wed Oct 19 08:29:04 2011] Mean chipx,y = (799.00, 551.00)
[Wed Oct 19 08:29:04 2011] Mean tdetx,y = (4581.00, 3860.00)
[Wed Oct 19 08:29:04 2011] chipx,y range = (782.00-813.00, 536.00-570.00)
[Wed Oct 19 08:29:04 2011] Size of ../../acisf01698/products/events/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 4 counts
[Wed Oct 19 08:29:04 2011] ../../acisf01698/products/images/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.img and ../../acisf01698/products/images/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Oct 19 08:29:04 2011] Not generating rmf since there are only 12 counts
[Wed Oct 19 08:29:04 2011] arf not found, will run specextract
[Wed Oct 19 08:29:06 2011] ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_bkg.pi not found
[Wed Oct 19 08:29:06 2011] ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20.warf not found
[Wed Oct 19 08:29:06 2011] ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20.wrmf not found
[Wed Oct 19 08:29:06 2011] Removal of ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20.soff failed
[Wed Oct 19 08:29:06 2011] Failed to rename ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_grp.pi to ../../acisf01698/products/spectra/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.pi
[Wed Oct 19 08:29:11 2011] ../../acisf01698/products/lightcurves/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.lc and ../../acisf01698/products/lightcurves/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Oct 19 08:30:17 2011] No arf file found
[Wed Oct 19 08:31:42 2011] Updating aperture counts using extracted products
[Wed Oct 19 08:31:42 2011] Error reading totcts from fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_src.pi
[Wed Oct 19 08:31:42 2011] No arf file for this source, not re-computing flux
[Wed Oct 19 08:31:51 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 08:31:52 2011] acisf01698/analysis//spectral/fullrun_ccd3_acisf01698_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete