[Fri Oct 21 12:37:54 2011] Detection parameters:
  Position = (495.8, 694.5) = 22 17 39.81 0 12 59.6
  Extent = 0.7" x 0.6", rotation angle = 18 degrees
  Source counts = 21.7 +/- 5.1
  Background counts = 4.3
  Rate = 0.0003 +/- 7e-05

[Fri Oct 21 12:37:55 2011] Off-axis axis estimate = 3.62'
[Fri Oct 21 12:38:55 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 12:38:55 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Oct 21 12:38:55 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.774
[Fri Oct 21 12:38:55 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.72"
[Fri Oct 21 12:38:56 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass0_src19.ximg exists
[Fri Oct 21 12:38:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01694_pi14-548_cl_pass0_src19.csv
[Fri Oct 21 12:38:56 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Oct 21 12:38:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01694_pi14-548_cl_pass0_src19.csv
[Fri Oct 21 12:38:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01694_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01694_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 12:38:57 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Oct 21 12:38:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01694_pi14-548_cl_pass0_tfrozen_src19.csv
[Fri Oct 21 12:38:57 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Oct 21 12:38:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01694_pi14-548_cl_pass0_tfrozen_src19.csv
[Fri Oct 21 12:38:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01694_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01694_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 12:39:10 2011] Spatial fit model total counts = 25.093900, observed total counts = 30.000000
[Fri Oct 21 12:39:10 2011] Offset between fit and detection position for source 29 = 0.279089 pixels
[Fri Oct 21 12:39:10 2011] 26.249235 total counts/ 0.496035 bgd. counts: snr = 36.565797
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.279089 pixels
  Position = (495.8, 694.8) = 22 17 39.83 0 12 59.5
  Extent = 1.1 (0.8-1.2)", rotation angle = 0
  Source counts = 25.8 +/- 5.1
  Background counts = 0.5
  Rate = 0.0003 +/- 7e-05
[Fri Oct 21 12:39:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 12:39:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 12:39:10 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 12:39:10 2011] Source does appear to be extended
[Fri Oct 21 12:39:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 12:39:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 12:39:37 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Fri Oct 21 12:39:37 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Fri Oct 21 12:39:37 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 1.08"
[Fri Oct 21 12:39:38 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass1_src19.ximg exists
[Fri Oct 21 12:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01694_pi14-548_cl_pass1_src19.csv
[Fri Oct 21 12:39:38 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass1_src19_1.ximg exists
[Fri Oct 21 12:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01694_pi14-548_cl_pass1_src19.csv
[Fri Oct 21 12:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01694_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01694_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 12:39:39 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Fri Oct 21 12:39:39 2011] fullrun_ccd7_acisf01694_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Oct 21 12:39:39 2011] Fit fullrun_ccd7_acisf01694_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Oct 21 12:39:53 2011] Spatial fit model total counts = 31.990800, observed total counts = 32.000000
[Fri Oct 21 12:39:53 2011] Offset between fit and detection position for source 29 = 0.410761 pixels
[Fri Oct 21 12:39:53 2011] 32.557400 total counts/ 10.354300 bgd. counts: snr = 6.900066
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.410761 pixels
  Position = (496.2, 694.7) = 22 17 39.81 0 12 59.5
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 22.2 +/- 5.7
  Background counts = 10.4
  Rate = 0.0003 +/- 7e-05
[Fri Oct 21 12:39:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 12:39:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 12:39:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 12:39:53 2011] Source does appear to be extended
[Fri Oct 21 12:39:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 12:46:09 2011] Not overwriting source region fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.reg
[Fri Oct 21 12:46:09 2011] Extracting stamp from image fullrun_ccd7_acisf01694_pi14-548_cl_sm2.00.img.gz, (451, 650) - (541, 740)
[Fri Oct 21 12:46:09 2011] Writing fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29.gif
[Fri Oct 21 12:48:19 2011] ../../acisf01694/products/events/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.evt and ../../acisf01694/products/events/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Fri Oct 21 12:48:19 2011] Size of ../../acisf01694/products/events/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.evt.gz[events] = 26 counts
[Fri Oct 21 12:48:19 2011] Mean chipx,y = (616.85, 692.96)
[Fri Oct 21 12:48:19 2011] Mean tdetx,y = (4533.85, 2394.96)
[Fri Oct 21 12:48:19 2011] chipx,y range = (602.00-640.00, 675.00-713.00)
[Fri Oct 21 12:48:19 2011] Size of ../../acisf01694/products/events/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 92 counts
[Fri Oct 21 12:48:19 2011] ../../acisf01694/products/images/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.img and ../../acisf01694/products/images/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Fri Oct 21 12:48:19 2011] Not generating rmf since there are only 22 counts
[Fri Oct 21 12:48:19 2011] arf not found, will run specextract
[Fri Oct 21 12:48:21 2011] ../../acisf01694/products/spectra/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_bkg.pi not found
[Fri Oct 21 12:48:21 2011] ../../acisf01694/products/spectra/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29.warf not found
[Fri Oct 21 12:48:21 2011] ../../acisf01694/products/spectra/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29.wrmf not found
[Fri Oct 21 12:48:21 2011] Removal of ../../acisf01694/products/spectra/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29.soff failed
[Fri Oct 21 12:48:21 2011] Failed to rename ../../acisf01694/products/spectra/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_grp.pi to ../../acisf01694/products/spectra/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.pi
[Fri Oct 21 12:48:26 2011] ../../acisf01694/products/lightcurves/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.lc and ../../acisf01694/products/lightcurves/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Fri Oct 21 12:50:52 2011] No arf file found
[Fri Oct 21 12:50:56 2011] Updating aperture counts using extracted products
[Fri Oct 21 12:50:56 2011] Error reading totcts from fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_src.pi
[Fri Oct 21 12:50:57 2011] No arf file for this source, not re-computing flux
[Fri Oct 21 12:51:04 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 12:51:05 2011] acisf01694/analysis//spectral/fullrun_ccd7_acisf01694_pi14-548_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete