[Sat Oct 15 16:00:57 2011] Detection parameters:
  Position = (491.2, 937.1) = 10 52 28.59 57 9 19.7
  Extent = 0.7" x 0.5", rotation angle = 145 degrees
  Source counts = 19.8 +/- 4.5
  Background counts = 0.2
  Rate = 0.004 +/- 0.001

[Sat Oct 15 16:00:57 2011] Off-axis axis estimate = 4.00'
[Sat Oct 15 16:01:23 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 16:01:23 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Oct 15 16:01:23 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Sat Oct 15 16:01:23 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.83"
[Sat Oct 15 16:01:23 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 15 16:01:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01682_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 16:01:23 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 15 16:01:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01682_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 16:01:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01682_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01682_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 16:01:23 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 15 16:01:23 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 15 16:01:23 2011] Fit fullrun_ccd0_acisf01682_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 15 16:01:28 2011] Spatial fit model total counts = 19.484600, observed total counts = 23.000000
[Sat Oct 15 16:01:28 2011] Offset between fit and detection position for source 2 = 0.714778 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.714778 pixels
  Position = (491.4, 937.8) = 10 52 28.61 57 9 19.8
  Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.5)", rotation angle = 220 (209-239) degrees
  Source counts = 19.6 +/- 4.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Sat Oct 15 16:01:28 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 16:01:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 16:01:28 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 16:01:28 2011] Source does appear to be extended
[Sat Oct 15 16:01:28 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Sat Oct 15 16:01:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 16:01:39 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Oct 15 16:01:39 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.792
[Sat Oct 15 16:01:39 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.58"
[Sat Oct 15 16:01:39 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 15 16:01:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01682_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 16:01:39 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 15 16:01:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01682_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 16:01:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01682_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01682_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 16:01:39 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 15 16:01:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01682_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 15 16:01:39 2011] fullrun_ccd0_acisf01682_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 15 16:01:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01682_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 15 16:01:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01682_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01682_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 16:01:43 2011] Spatial fit model total counts = 18.925100, observed total counts = 23.000000
[Sat Oct 15 16:01:43 2011] Offset between fit and detection position for source 2 = 0.098998 pixels
[Sat Oct 15 16:01:43 2011] 19.026664 total counts/ 0.393364 bgd. counts: snr = 29.709304
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.098998 pixels
  Position = (491.4, 937.8) = 10 52 28.61 57 9 19.8
  Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.4)", rotation angle = 44 (27-56) degrees
  Source counts = 18.6 +/- 4.4
  Background counts = 0.4
  Rate = 0.004 +/- 0.0009
[Sat Oct 15 16:01:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 16:01:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 16:01:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 16:01:43 2011] Source does appear to be extended
[Sat Oct 15 16:01:43 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.36
[Sat Oct 15 16:01:56 2011] Not overwriting source region fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 15 16:01:56 2011] Extracting stamp from image fullrun_ccd0_acisf01682_pi14-548_cl_sm2.00.img.gz, (455, 902) - (527, 974)
[Sat Oct 15 16:01:56 2011] Writing fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2.gif
[Sat Oct 15 16:02:04 2011] ../../acisf01682/products/events/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.evt and ../../acisf01682/products/events/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 15 16:02:05 2011] Size of ../../acisf01682/products/events/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.evt.gz[events] = 18 counts
[Sat Oct 15 16:02:05 2011] Mean chipx,y = (690.00, 807.67)
[Sat Oct 15 16:02:05 2011] Mean tdetx,y = (3868.67, 4442.00)
[Sat Oct 15 16:02:05 2011] chipx,y range = (673.00-707.00, 793.00-826.00)
[Sat Oct 15 16:02:05 2011] Size of ../../acisf01682/products/events/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2 counts
[Sat Oct 15 16:02:05 2011] ../../acisf01682/products/images/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.img and ../../acisf01682/products/images/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 15 16:02:05 2011] Not generating rmf since there are only 18 counts
[Sat Oct 15 16:02:05 2011] arf not found, will run specextract
[Sat Oct 15 16:02:06 2011] ../../acisf01682/products/spectra/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_bkg.pi not found
[Sat Oct 15 16:02:06 2011] ../../acisf01682/products/spectra/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2.warf not found
[Sat Oct 15 16:02:06 2011] ../../acisf01682/products/spectra/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2.wrmf not found
[Sat Oct 15 16:02:06 2011] Removal of ../../acisf01682/products/spectra/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2.soff failed
[Sat Oct 15 16:02:06 2011] Failed to rename ../../acisf01682/products/spectra/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_grp.pi to ../../acisf01682/products/spectra/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.pi
[Sat Oct 15 16:02:12 2011] ../../acisf01682/products/lightcurves/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.lc and ../../acisf01682/products/lightcurves/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 15 16:02:13 2011] No arf file found
[Sat Oct 15 16:03:59 2011] Updating aperture counts using extracted products
[Sat Oct 15 16:03:59 2011] Error reading totcts from fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_src.pi
[Sat Oct 15 16:03:59 2011] No arf file for this source, not re-computing flux
[Sat Oct 15 16:04:01 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 16:04:02 2011] acisf01682/analysis//spectral/fullrun_ccd0_acisf01682_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete