[Mon Sep 26 19:21:07 2011] Detection parameters:
  Position = (745.4, 317.5) = 15 32 50.92 30 19 45.0
  Extent = 0.5" x 0.5", rotation angle = 151 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.001 +/- 0.0003

[Mon Sep 26 19:21:08 2011] Off-axis axis estimate = 2.18'
[Mon Sep 26 19:21:40 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 19:21:40 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Sep 26 19:21:40 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.126
[Mon Sep 26 19:21:40 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.45"
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src9.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src9.csv
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src9.csv
[Mon Sep 26 19:21:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src9.csv
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src9.csv
[Mon Sep 26 19:21:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 19:21:50 2011] Spatial fit model total counts = 10.357900, observed total counts = 12.000000
[Mon Sep 26 19:21:50 2011] Offset between fit and detection position for source 8 = 0.683769 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.683769 pixels
  Position = (745.9, 318.0) = 15 32 50.92 30 19 45.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 11.0 +/- 3.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Mon Sep 26 19:21:50 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 19:21:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 19:21:50 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 19:21:50 2011] Source does appear to be extended
[Mon Sep 26 19:21:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 19:21:50 2011] Deleting source due to low Poisson probability 0.8