[Mon Sep 26 19:21:07 2011] Detection parameters:
  Position = (797.4, 606.0) = 15 32 48.94 30 22 7.0
  Extent = 0.8" x 0.6", rotation angle = 77 degrees
  Source counts = 14.4 +/- 3.9
  Background counts = 0.6
  Rate = 0.001 +/- 0.0004

[Mon Sep 26 19:21:07 2011] Off-axis axis estimate = 4.55'
[Mon Sep 26 19:21:40 2011] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 19:21:40 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Mon Sep 26 19:21:40 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.148
[Mon Sep 26 19:21:40 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.01"
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src6.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src6.csv
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src6.csv
[Mon Sep 26 19:21:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01665_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon Sep 26 19:21:41 2011] fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Sep 26 19:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon Sep 26 19:21:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01665_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 19:21:50 2011] Spatial fit model total counts = 14.845800, observed total counts = 16.000000
[Mon Sep 26 19:21:50 2011] Offset between fit and detection position for source 5 = 0.708405 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.708405 pixels
  Position = (798.0, 606.3) = 15 32 48.94 30 22 6.9
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Mon Sep 26 19:21:50 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 19:21:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 19:21:50 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 19:21:50 2011] Source does appear to be extended
[Mon Sep 26 19:21:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 19:21:50 2011] Deleting source due to low Poisson probability 0.9