[Mon Oct 24 08:12:59 2011] Detection parameters:
  Position = (695.2, 838.7) = 15 24 35.56 9 58 22.2
  Extent = 0.5" x 0.5", rotation angle = 144 degrees
  Source counts = 23.6 +/- 5.0
  Background counts = 1.4
  Rate = 0.0005 +/- 0.0001

[Mon Oct 24 08:13:00 2011] Off-axis axis estimate = 2.44'
[Mon Oct 24 08:13:53 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 08:13:53 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 24 08:13:53 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.021
[Mon Oct 24 08:13:53 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.48"
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src11.ximg exists
[Mon Oct 24 08:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src11.csv
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src11_1.ximg exists
[Mon Oct 24 08:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src11.csv
[Mon Oct 24 08:13:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Oct 24 08:13:54 2011] Fit fullrun_ccd3_acisf01664_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Oct 24 08:14:06 2011] Spatial fit model total counts = 31.127100, observed total counts = 31.000000
[Mon Oct 24 08:14:06 2011] Offset between fit and detection position for source 9 = 0.680362 pixels
[Mon Oct 24 08:14:06 2011] 31.133890 total counts/ 8.170390 bgd. counts: snr = 8.033720
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.680362 pixels
  Position = (695.6, 839.3) = 15 24 35.56 9 58 22.2
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 23.0 +/- 5.6
  Background counts = 8.2
  Rate = 0.0005 +/- 0.0001
[Mon Oct 24 08:14:06 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 08:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 08:14:06 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 08:14:06 2011] Source does appear to be extended
[Mon Oct 24 08:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 08:14:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 08:14:26 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 24 08:14:26 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.041
[Mon Oct 24 08:14:26 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.48"
[Mon Oct 24 08:14:27 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src11.ximg exists
[Mon Oct 24 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src11.csv
[Mon Oct 24 08:14:27 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Oct 24 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src11.csv
[Mon Oct 24 08:14:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 08:14:28 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Oct 24 08:14:28 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Oct 24 08:14:28 2011] Fit fullrun_ccd3_acisf01664_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Oct 24 08:14:38 2011] Spatial fit model total counts = 30.938700, observed total counts = 31.000000
[Mon Oct 24 08:14:38 2011] Offset between fit and detection position for source 9 = 0.016950 pixels
[Mon Oct 24 08:14:38 2011] 30.568660 total counts/ 7.548560 bgd. counts: snr = 8.378671
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.016950 pixels
  Position = (695.6, 839.3) = 15 24 35.56 9 58 22.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 23.0 +/- 5.5
  Background counts = 7.5
  Rate = 0.0005 +/- 0.0001
[Mon Oct 24 08:14:38 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 08:14:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 08:14:38 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 08:14:38 2011] Source does appear to be extended
[Mon Oct 24 08:14:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 08:17:13 2011] Not overwriting source region fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.reg
[Mon Oct 24 08:17:13 2011] Extracting stamp from image fullrun_ccd3_acisf01664_pi14-548_cl_sm2.00.img.gz, (673, 817) - (718, 862)
[Mon Oct 24 08:17:13 2011] Writing fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9.gif
[Mon Oct 24 08:17:44 2011] ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.evt and ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon Oct 24 08:17:44 2011] Size of ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.evt.gz[events] = 24 counts
[Mon Oct 24 08:17:44 2011] Mean chipx,y = (522.17, 724.33)
[Mon Oct 24 08:17:44 2011] Mean tdetx,y = (4407.67, 3583.17)
[Mon Oct 24 08:17:44 2011] chipx,y range = (504.00-541.00, 710.00-741.00)
[Mon Oct 24 08:17:44 2011] Size of ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 14 counts
[Mon Oct 24 08:17:44 2011] ../../acisf01664/products/images/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.img and ../../acisf01664/products/images/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon Oct 24 08:17:44 2011] ../../acisf01664/products/spectra/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.pi and ../../acisf01664/products/spectra/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon Oct 24 08:17:44 2011] Not generating rmf since there are only 23 counts
[Mon Oct 24 08:17:47 2011] ../../acisf01664/products/lightcurves/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.lc and ../../acisf01664/products/lightcurves/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon Oct 24 08:18:15 2011] 185.962
[Mon Oct 24 08:18:25 2011] Updating aperture counts using extracted products
[Mon Oct 24 08:18:25 2011] Error reading totcts from fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9_src.pi.gz
[Mon Oct 24 08:18:25 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 08:18:25 2011] Using photon index=1.80, rate=0.000453, arf fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src9.arf
[Mon Oct 24 08:18:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 08:18:25 2011] Updating source flux to 5.4e-15
[Mon Oct 24 08:18:41 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting