[Mon Oct 24 08:12:59 2011] Detection parameters:
  Position = (488.6, 1038.6) = 15 24 42.44 10 0 0.5
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0003 +/- 8e-05

[Mon Oct 24 08:13:00 2011] Off-axis axis estimate = 1.63'
[Mon Oct 24 08:13:53 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 08:13:53 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct 24 08:13:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.305
[Mon Oct 24 08:13:53 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.40"
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src15.ximg exists
[Mon Oct 24 08:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src15.csv
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Oct 24 08:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src15.csv
[Mon Oct 24 08:13:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01664_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Oct 24 08:13:54 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Oct 24 08:13:54 2011] Fit fullrun_ccd3_acisf01664_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Oct 24 08:14:06 2011] Spatial fit model total counts = 21.000000, observed total counts = 21.000000
[Mon Oct 24 08:14:06 2011] Offset between fit and detection position for source 10 = 0.480325 pixels
[Mon Oct 24 08:14:06 2011] 20.948180 total counts/ 7.554080 bgd. counts: snr = 4.873296
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.480325 pixels
  Position = (488.9, 1039.0) = 15 24 42.45 10 0 0.5
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 13.4 +/- 4.6
  Background counts = 7.6
  Rate = 0.0003 +/- 9e-05
[Mon Oct 24 08:14:06 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 08:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 08:14:06 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 08:14:06 2011] Source does appear to be extended
[Mon Oct 24 08:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 08:14:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 08:14:26 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 24 08:14:26 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.758
[Mon Oct 24 08:14:26 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.45"
[Mon Oct 24 08:14:27 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 24 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src15.csv
[Mon Oct 24 08:14:27 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 24 08:14:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src15.csv
[Mon Oct 24 08:14:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01664_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 08:14:28 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 24 08:14:28 2011] fullrun_ccd3_acisf01664_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 24 08:14:28 2011] Fit fullrun_ccd3_acisf01664_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct 24 08:14:38 2011] Spatial fit model total counts = 21.000000, observed total counts = 21.000000
[Mon Oct 24 08:14:38 2011] Offset between fit and detection position for source 10 = 0.000041 pixels
[Mon Oct 24 08:14:38 2011] 20.948170 total counts/ 7.554170 bgd. counts: snr = 4.873230
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000041 pixels
  Position = (488.9, 1039.0) = 15 24 42.45 10 0 0.5
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 13.4 +/- 4.6
  Background counts = 7.6
  Rate = 0.0003 +/- 9e-05
[Mon Oct 24 08:14:38 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 08:14:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 08:14:38 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 08:14:38 2011] Source does appear to be extended
[Mon Oct 24 08:14:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 08:17:13 2011] Not overwriting source region fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 24 08:17:13 2011] Extracting stamp from image fullrun_ccd3_acisf01664_pi14-548_cl_sm2.00.img.gz, (468, 1019) - (509, 1059)
[Mon Oct 24 08:17:13 2011] Writing fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10.gif
[Mon Oct 24 08:17:56 2011] ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.evt and ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 24 08:17:56 2011] Size of ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.evt.gz[events] = 14 counts
[Mon Oct 24 08:17:56 2011] Mean chipx,y = (780.79, 850.71)
[Mon Oct 24 08:17:56 2011] Mean tdetx,y = (4281.29, 3841.79)
[Mon Oct 24 08:17:56 2011] chipx,y range = (764.00-798.00, 837.00-868.00)
[Mon Oct 24 08:17:56 2011] Size of ../../acisf01664/products/events/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Mon Oct 24 08:17:56 2011] ../../acisf01664/products/images/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.img and ../../acisf01664/products/images/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 24 08:17:56 2011] ../../acisf01664/products/spectra/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.pi and ../../acisf01664/products/spectra/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 24 08:17:56 2011] Not generating rmf since there are only 13 counts
[Mon Oct 24 08:17:59 2011] ../../acisf01664/products/lightcurves/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.lc and ../../acisf01664/products/lightcurves/fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 24 08:18:15 2011] 192.596
[Mon Oct 24 08:18:25 2011] Updating aperture counts using extracted products
[Mon Oct 24 08:18:25 2011] Error reading totcts from fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 24 08:18:25 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 08:18:25 2011] Using photon index=1.80, rate=0.000263, arf fullrun_ccd3_acisf01664_pi14-548_pass1_cl_src10.arf
[Mon Oct 24 08:18:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 08:18:25 2011] Updating source flux to 3e-15
[Mon Oct 24 08:18:41 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting