[Mon Oct 24 08:12:54 2011] Detection parameters:
  Position = (556.4, 673.2) = 15 25 3.07 10 7 43.7
  Extent = 2.7" x 2.1", rotation angle = 135 degrees
  Source counts = 11.7 +/- 4.4
  Background counts = 7.3
  Rate = 0.0002 +/- 9e-05

[Mon Oct 24 08:12:55 2011] Off-axis axis estimate = 9.51'
[Mon Oct 24 08:13:50 2011] Using EEF radius (= 4.00 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 08:13:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 08:13:50 2011] Initial guess for spatial extent in simple fitting = 4.00"
[Mon Oct 24 08:13:50 2011] source mask rpix=8.1, npix_max = 297, mask sum = 289, frac = 0.971
[Mon Oct 24 08:13:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.00"
[Mon Oct 24 08:13:50 2011] fullrun_ccd0_acisf01664_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 24 08:13:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01664_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 08:13:50 2011] fullrun_ccd0_acisf01664_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 24 08:13:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01664_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 08:13:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01664_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01664_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 08:13:50 2011] fullrun_ccd0_acisf01664_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 24 08:13:50 2011] fullrun_ccd0_acisf01664_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 24 08:13:50 2011] Fit fullrun_ccd0_acisf01664_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 24 08:14:00 2011] Spatial fit model total counts = 50.999900, observed total counts = 51.000000
[Mon Oct 24 08:14:00 2011] Offset between fit and detection position for source 5 = 3.827236 pixels
[Mon Oct 24 08:14:00 2011] 51.195550 total counts/ 41.554600 bgd. counts: snr = 1.495582
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.827236 pixels
  Position = (557.1, 676.9) = 15 25 3.07 10 7 45.3
  Extent = 1.4 (1.0-2.5)", rotation angle = 0
  Source counts = 9.6 +/- 7.2
  Background counts = 41.6
  Rate = 0.0002 +/- 0.0001
  Deleting source due to low Poisson probability