[Mon Oct 31 01:34:06 2011] Detection parameters:
  Position = (749.5, 919.1) = 11 20 39.05 23 21 36.9
  Extent = 0.6" x 0.5", rotation angle = 155 degrees
  Source counts = 33.8 +/- 5.9
  Background counts = 1.2
  Rate = 0.0005 +/- 8e-05

[Mon Oct 31 01:34:09 2011] Off-axis axis estimate = 3.40'
[Mon Oct 31 01:35:12 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 01:35:12 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Mon Oct 31 01:35:12 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.871
[Mon Oct 31 01:35:12 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.67"
[Mon Oct 31 01:35:13 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src13.ximg exists
[Mon Oct 31 01:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src13.csv
[Mon Oct 31 01:35:13 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Oct 31 01:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src13.csv
[Mon Oct 31 01:35:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 01:35:14 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Oct 31 01:35:14 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Oct 31 01:35:14 2011] Fit fullrun_ccd2_acisf01660_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Oct 31 01:35:28 2011] Spatial fit model total counts = 36.141600, observed total counts = 37.000000
[Mon Oct 31 01:35:28 2011] Offset between fit and detection position for source 6 = 0.716181 pixels
[Mon Oct 31 01:35:28 2011] 36.135340 total counts/ 2.532540 bgd. counts: snr = 21.115303
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.716181 pixels
  Position = (750.1, 919.6) = 11 20 39.05 23 21 36.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 33.6 +/- 6.0
  Background counts = 2.5
  Rate = 0.0005 +/- 8e-05
[Mon Oct 31 01:35:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 01:35:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 01:35:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 01:35:28 2011] Source does appear to be extended
[Mon Oct 31 01:35:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 01:35:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 01:35:57 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Mon Oct 31 01:35:57 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.081
[Mon Oct 31 01:35:57 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.70"
[Mon Oct 31 01:35:58 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src13.ximg exists
[Mon Oct 31 01:35:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src13.csv
[Mon Oct 31 01:35:58 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Oct 31 01:35:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src13.csv
[Mon Oct 31 01:35:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 01:35:59 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Oct 31 01:35:59 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Oct 31 01:35:59 2011] Fit fullrun_ccd2_acisf01660_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Oct 31 01:36:12 2011] Spatial fit model total counts = 38.195800, observed total counts = 37.000000
[Mon Oct 31 01:36:12 2011] Offset between fit and detection position for source 6 = 0.056850 pixels
[Mon Oct 31 01:36:12 2011] 38.126520 total counts/ 2.670520 bgd. counts: snr = 21.696607
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.056850 pixels
  Position = (750.1, 919.6) = 11 20 39.04 23 21 36.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 35.5 +/- 6.2
  Background counts = 2.7
  Rate = 0.0005 +/- 9e-05
[Mon Oct 31 01:36:12 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 01:36:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 01:36:12 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 01:36:12 2011] Source does appear to be extended
[Mon Oct 31 01:36:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 01:38:07 2011] Not overwriting source region fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.reg
[Mon Oct 31 01:38:07 2011] Extracting stamp from image fullrun_ccd2_acisf01660_pi14-548_cl_sm2.00.img.gz, (719, 889) - (781, 951)
[Mon Oct 31 01:38:07 2011] Writing fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6.gif
[Mon Oct 31 01:38:45 2011] ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.evt and ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct 31 01:38:45 2011] Size of ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.evt.gz[events] = 35 counts
[Mon Oct 31 01:38:45 2011] Mean chipx,y = (348.97, 659.34)
[Mon Oct 31 01:38:45 2011] Mean tdetx,y = (3720.34, 3737.03)
[Mon Oct 31 01:38:45 2011] chipx,y range = (333.00-367.00, 642.00-675.00)
[Mon Oct 31 01:38:45 2011] Size of ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 7 counts
[Mon Oct 31 01:38:45 2011] ../../acisf01660/products/images/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.img and ../../acisf01660/products/images/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct 31 01:38:45 2011] ../../acisf01660/products/spectra/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.pi and ../../acisf01660/products/spectra/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct 31 01:38:45 2011] Not generating rmf since there are only 35 counts
[Mon Oct 31 01:38:48 2011] ../../acisf01660/products/lightcurves/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.lc and ../../acisf01660/products/lightcurves/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct 31 01:39:55 2011] 198.821
[Mon Oct 31 01:42:18 2011] Updating aperture counts using extracted products
[Mon Oct 31 01:42:18 2011] Error reading totcts from fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct 31 01:42:18 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 01:42:18 2011] Using photon index=1.80, rate=0.000498, arf fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src6.arf
[Mon Oct 31 01:42:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 01:42:18 2011] Updating source flux to 5.4e-15
[Mon Oct 31 01:42:44 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting