[Mon Oct 31 01:34:07 2011] Detection parameters:
  Position = (304.8, 720.0) = 11 20 54.93 23 19 59.0
  Extent = 0.8" x 0.5", rotation angle = 134 degrees
  Source counts = 23.8 +/- 5.0
  Background counts = 1.2
  Rate = 0.0003 +/- 7e-05

[Mon Oct 31 01:34:09 2011] Off-axis axis estimate = 4.43'
[Mon Oct 31 01:35:12 2011] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 01:35:12 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Mon Oct 31 01:35:12 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.820
[Mon Oct 31 01:35:12 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.97"
[Mon Oct 31 01:35:13 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src17.ximg exists
[Mon Oct 31 01:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src17.csv
[Mon Oct 31 01:35:13 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Oct 31 01:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src17.csv
[Mon Oct 31 01:35:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01660_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 01:35:14 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Oct 31 01:35:14 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Oct 31 01:35:14 2011] Fit fullrun_ccd2_acisf01660_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Oct 31 01:35:28 2011] Spatial fit model total counts = 25.794400, observed total counts = 26.000000
[Mon Oct 31 01:35:28 2011] Offset between fit and detection position for source 16 = 0.883688 pixels
[Mon Oct 31 01:35:28 2011] 25.509360 total counts/ 3.424260 bgd. counts: snr = 11.934824
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.883688 pixels
  Position = (305.7, 720.2) = 11 20 54.92 23 19 58.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 22.1 +/- 5.1
  Background counts = 3.4
  Rate = 0.0003 +/- 7e-05
[Mon Oct 31 01:35:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 01:35:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 01:35:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 01:35:28 2011] Source does appear to be extended
[Mon Oct 31 01:35:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 01:35:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 01:35:57 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Oct 31 01:35:57 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.121
[Mon Oct 31 01:35:57 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.68"
[Mon Oct 31 01:35:58 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src17.ximg exists
[Mon Oct 31 01:35:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src17.csv
[Mon Oct 31 01:35:58 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src17_1.ximg exists
[Mon Oct 31 01:35:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src17.csv
[Mon Oct 31 01:35:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01660_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 01:35:59 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Mon Oct 31 01:35:59 2011] fullrun_ccd2_acisf01660_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Oct 31 01:35:59 2011] Fit fullrun_ccd2_acisf01660_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Oct 31 01:36:12 2011] Spatial fit model total counts = 27.529400, observed total counts = 27.000000
[Mon Oct 31 01:36:12 2011] Offset between fit and detection position for source 16 = 0.067860 pixels
[Mon Oct 31 01:36:12 2011] 27.599690 total counts/ 5.631590 bgd. counts: snr = 9.257143
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.067860 pixels
  Position = (305.6, 720.2) = 11 20 54.92 23 19 58.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 22.0 +/- 5.3
  Background counts = 5.6
  Rate = 0.0003 +/- 7e-05
[Mon Oct 31 01:36:12 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 01:36:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 01:36:12 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 01:36:12 2011] Source does appear to be extended
[Mon Oct 31 01:36:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 01:38:07 2011] Not overwriting source region fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.reg
[Mon Oct 31 01:38:07 2011] Extracting stamp from image fullrun_ccd2_acisf01660_pi14-548_cl_sm2.00.img.gz, (274, 688) - (338, 752)
[Mon Oct 31 01:38:07 2011] Writing fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16.gif
[Mon Oct 31 01:38:57 2011] ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.evt and ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Mon Oct 31 01:38:57 2011] Size of ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.evt.gz[events] = 23 counts
[Mon Oct 31 01:38:57 2011] Mean chipx,y = (827.70, 768.04)
[Mon Oct 31 01:38:57 2011] Mean tdetx,y = (3829.04, 3258.30)
[Mon Oct 31 01:38:57 2011] chipx,y range = (808.00-844.00, 751.00-787.00)
[Mon Oct 31 01:38:57 2011] Size of ../../acisf01660/products/events/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 15 counts
[Mon Oct 31 01:38:57 2011] ../../acisf01660/products/images/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.img and ../../acisf01660/products/images/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Mon Oct 31 01:38:57 2011] ../../acisf01660/products/spectra/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.pi and ../../acisf01660/products/spectra/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Mon Oct 31 01:38:57 2011] Not generating rmf since there are only 21 counts
[Mon Oct 31 01:38:59 2011] ../../acisf01660/products/lightcurves/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.lc and ../../acisf01660/products/lightcurves/fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Mon Oct 31 01:39:55 2011] 185.666
[Mon Oct 31 01:42:18 2011] Updating aperture counts using extracted products
[Mon Oct 31 01:42:18 2011] Error reading totcts from fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16_src.pi.gz
[Mon Oct 31 01:42:18 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 01:42:18 2011] Using photon index=1.80, rate=0.000308, arf fullrun_ccd2_acisf01660_pi14-548_pass1_cl_src16.arf
[Mon Oct 31 01:42:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 01:42:18 2011] Updating source flux to 3.6e-15
[Mon Oct 31 01:42:44 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting