[Fri Oct 28 10:46:43 2011] Detection parameters:
  Position = (1018.7, 741.1) = 11 49 11.86 22 17 7.7
  Extent = 0.6" x 0.6", rotation angle = 137 degrees
  Source counts = 29.4 +/- 5.5
  Background counts = 0.6
  Rate = 0.002 +/- 0.0003

[Fri Oct 28 10:46:43 2011] Off-axis axis estimate = 5.59'
[Fri Oct 28 10:47:22 2011] Using EEF radius (= 1.43 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 10:47:22 2011] Initial guess for spatial extent in simple fitting = 1.43"
[Fri Oct 28 10:47:22 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.053
[Fri Oct 28 10:47:22 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.43"
[Fri Oct 28 10:47:22 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 28 10:47:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01656_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 10:47:22 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 28 10:47:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01656_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 10:47:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01656_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01656_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 10:47:22 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 28 10:47:22 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 28 10:47:22 2011] Fit fullrun_ccd2_acisf01656_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 28 10:47:29 2011] Spatial fit model total counts = 46.349700, observed total counts = 46.000000
[Fri Oct 28 10:47:29 2011] Offset between fit and detection position for source 13 = 0.562490 pixels
[Fri Oct 28 10:47:29 2011] 48.799700 total counts/ 25.942700 bgd. counts: snr = 4.487574
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.562490 pixels
  Position = (1019.2, 741.4) = 11 49 11.86 22 17 7.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.9 +/- 7.0
  Background counts = 25.9
  Rate = 0.001 +/- 0.0004
[Fri Oct 28 10:47:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 10:47:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 10:47:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 10:47:29 2011] Source does appear to be extended
[Fri Oct 28 10:47:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 10:47:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 10:47:47 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Oct 28 10:47:47 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.942
[Fri Oct 28 10:47:47 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.51"
[Fri Oct 28 10:47:47 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 28 10:47:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01656_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 10:47:47 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 28 10:47:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01656_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 10:47:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01656_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01656_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 10:47:47 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 28 10:47:47 2011] fullrun_ccd2_acisf01656_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 28 10:47:47 2011] Fit fullrun_ccd2_acisf01656_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 28 10:47:55 2011] Spatial fit model total counts = 46.664700, observed total counts = 45.000000
[Fri Oct 28 10:47:55 2011] Offset between fit and detection position for source 13 = 0.051794 pixels
[Fri Oct 28 10:47:55 2011] 48.944400 total counts/ 26.488800 bgd. counts: snr = 4.363083
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.051794 pixels
  Position = (1019.2, 741.4) = 11 49 11.86 22 17 7.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 22.5 +/- 7.0
  Background counts = 26.5
  Rate = 0.001 +/- 0.0004
[Fri Oct 28 10:47:55 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 10:47:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 10:47:55 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 10:47:55 2011] Source does appear to be extended
[Fri Oct 28 10:47:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 10:49:00 2011] Not overwriting source region fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.reg
[Fri Oct 28 10:49:00 2011] Extracting stamp from image fullrun_ccd2_acisf01656_pi14-548_cl_sm2.00.img.gz, (995, 717) - (1044, 766)
[Fri Oct 28 10:49:00 2011] Writing fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13.gif
[Fri Oct 28 10:49:15 2011] ../../acisf01656/products/events/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.evt and ../../acisf01656/products/events/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Oct 28 10:49:15 2011] Size of ../../acisf01656/products/events/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.evt.gz[events] = 28 counts
[Fri Oct 28 10:49:15 2011] Mean chipx,y = (172.00, 422.00)
[Fri Oct 28 10:49:15 2011] Mean tdetx,y = (3483.00, 3914.00)
[Fri Oct 28 10:49:15 2011] chipx,y range = (151.00-188.00, 405.00-440.00)
[Fri Oct 28 10:49:15 2011] Size of ../../acisf01656/products/events/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 12 counts
[Fri Oct 28 10:49:15 2011] ../../acisf01656/products/images/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.img and ../../acisf01656/products/images/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Oct 28 10:49:15 2011] ../../acisf01656/products/spectra/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.pi and ../../acisf01656/products/spectra/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Oct 28 10:49:15 2011] Not generating rmf since there are only 22 counts
[Fri Oct 28 10:49:19 2011] ../../acisf01656/products/lightcurves/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.lc and ../../acisf01656/products/lightcurves/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Oct 28 10:49:47 2011] 186.148
[Fri Oct 28 10:50:57 2011] Updating aperture counts using extracted products
[Fri Oct 28 10:50:57 2011] Error reading totcts from fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Oct 28 10:50:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 10:50:58 2011] Using photon index=1.80, rate=0.00121, arf fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13.arf
[Fri Oct 28 10:50:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 10:50:58 2011] Updating source flux to 1.4e-14
[Fri Oct 28 10:51:02 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 10:51:03 2011] acisf01656/analysis//spectral/fullrun_ccd2_acisf01656_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete