[Sat Oct  1 04:09:57 2011] Detection parameters:
  Position = (289.9, 581.6) = 7 17 54.64 37 44 33.3
  Extent = 1.7" x 1.3", rotation angle = 90 degrees
  Source counts = 152.8 +/- 12.6
  Background counts = 6.2
  Rate = 0.008 +/- 0.0006

[Sat Oct  1 04:10:00 2011] Off-axis axis estimate = 6.95'
[Sat Oct  1 04:11:27 2011] Using EEF radius (= 2.15 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 04:11:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 04:11:27 2011] Initial guess for spatial extent in simple fitting = 2.15"
[Sat Oct  1 04:11:27 2011] source mask rpix=4.4, npix_max = 94, mask sum = 90, frac = 0.948
[Sat Oct  1 04:11:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.15"
[Sat Oct  1 04:11:28 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 04:11:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01655_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 04:11:28 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 04:11:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01655_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 04:11:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01655_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01655_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 04:11:28 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 04:11:28 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 04:11:28 2011] Fit fullrun_ccd3_acisf01655_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 04:11:44 2011] Spatial fit model total counts = 160.990000, observed total counts = 161.000000
[Sat Oct  1 04:11:44 2011] Offset between fit and detection position for source 1 = 1.212870 pixels
[Sat Oct  1 04:11:44 2011] 160.507100 total counts/ 19.139100 bgd. counts: snr = 32.313973
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.212870 pixels
  Position = (290.6, 582.5) = 7 17 54.63 37 44 33.5
  Extent = 1.6 (1.4-1.8)", rotation angle = 0
  Source counts = 141.4 +/- 12.7
  Background counts = 19.1
  Rate = 0.007 +/- 0.0006
[Sat Oct  1 04:11:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 04:11:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 04:11:44 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 04:11:44 2011] Source does appear to be extended
[Sat Oct  1 04:11:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 04:12:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 04:12:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 04:12:13 2011] Initial guess for spatial extent in simple fitting = 1.58"
[Sat Oct  1 04:12:13 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.889
[Sat Oct  1 04:12:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.58"
[Sat Oct  1 04:12:13 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 04:12:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01655_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 04:12:13 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 04:12:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01655_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 04:12:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01655_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01655_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 04:12:14 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 04:12:14 2011] fullrun_ccd3_acisf01655_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 04:12:14 2011] Fit fullrun_ccd3_acisf01655_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 04:12:29 2011] Spatial fit model total counts = 154.993000, observed total counts = 155.000000
[Sat Oct  1 04:12:29 2011] Offset between fit and detection position for source 1 = 0.157630 pixels
[Sat Oct  1 04:12:29 2011] 154.421600 total counts/ 20.487600 bgd. counts: snr = 29.590023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157630 pixels
  Position = (290.6, 582.7) = 7 17 54.63 37 44 33.6
  Extent = 1.5 (1.3-1.7)", rotation angle = 0
  Source counts = 133.9 +/- 12.4
  Background counts = 20.5
  Rate = 0.007 +/- 0.0006
[Sat Oct  1 04:12:29 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 04:12:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 04:12:29 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 04:12:29 2011] Source does appear to be extended
[Sat Oct  1 04:12:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 04:16:10 2011] Not overwriting source region fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 04:16:10 2011] Extracting stamp from image fullrun_ccd3_acisf01655_pi14-548_cl_sm2.00.img.gz, (224, 516) - (358, 650)
[Sat Oct  1 04:16:10 2011] Writing fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 04:16:16 2011] ../../acisf01655/products/events/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.evt and ../../acisf01655/products/events/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 04:16:16 2011] Size of ../../acisf01655/products/events/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.evt.gz[events] = 150 counts
[Sat Oct  1 04:16:16 2011] Mean chipx,y = (106.60, 343.84)
[Sat Oct  1 04:16:16 2011] Mean tdetx,y = (4788.16, 3167.60)
[Sat Oct  1 04:16:16 2011] chipx,y range = (84.00-129.00, 320.00-367.00)
[Sat Oct  1 04:16:16 2011] Size of ../../acisf01655/products/events/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 20 counts
[Sat Oct  1 04:16:16 2011] ../../acisf01655/products/images/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.img and ../../acisf01655/products/images/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 04:16:16 2011] ../../acisf01655/products/spectra/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.pi and ../../acisf01655/products/spectra/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 04:16:19 2011] ../../acisf01655/products/lightcurves/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.lc and ../../acisf01655/products/lightcurves/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 04:17:44 2011] Keeping rmf generated by specextract
[Sat Oct  1 04:17:44 2011] 175.311
[Sat Oct  1 04:17:59 2011] Updating aperture counts using extracted products
[Sat Oct  1 04:17:59 2011] Error reading totcts from fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 04:17:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 04:17:59 2011] Using photon index=1.80, rate=0.00674, arf fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 04:17:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 04:17:59 2011] Updating source flux to 8.3e-14
[Sat Oct  1 04:18:22 2011] Reading fit data from acisf01655/analysis//spectral/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 04:18:22 2011] Spectral fit parameter nH value = 8.13645e+14
[Sat Oct  1 04:18:22 2011] Spectral fit parameter PhoIndex value = 1.49769
[Sat Oct  1 04:18:22 2011] Failed to get F(0.3-8.0) from acisf01655/analysis//spectral/fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 04:18:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 04:18:22 2011] Using Nh = 8.1e+14, photon index=1.50, rate=0.00674, arf fullrun_ccd3_acisf01655_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 04:18:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 04:18:22 2011] Updating source flux to 9.4e-14