[Sat Oct  1 04:09:55 2011] Detection parameters:
  Position = (656.4, 939.0) = 7 17 11.69 37 40 54.3
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 60.3 +/- 7.8
  Background counts = 0.7
  Rate = 0.003 +/- 0.0004

[Sat Oct  1 04:09:57 2011] Off-axis axis estimate = 2.84'
[Sat Oct  1 04:11:22 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 04:11:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 04:11:22 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sat Oct  1 04:11:22 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.150
[Sat Oct  1 04:11:22 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.55"
[Sat Oct  1 04:11:26 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct  1 04:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01655_pi14-548_cl_pass0_src3.csv
[Sat Oct  1 04:11:26 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct  1 04:11:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01655_pi14-548_cl_pass0_src3.csv
[Sat Oct  1 04:11:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01655_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01655_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 04:11:26 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct  1 04:11:26 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct  1 04:11:26 2011] Fit fullrun_ccd2_acisf01655_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct  1 04:11:43 2011] Spatial fit model total counts = 64.468100, observed total counts = 65.000000
[Sat Oct  1 04:11:43 2011] Offset between fit and detection position for source 3 = 0.663390 pixels
[Sat Oct  1 04:11:43 2011] 64.866190 total counts/ 5.968390 bgd. counts: snr = 24.108516
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.663390 pixels
  Position = (656.8, 939.5) = 7 17 11.70 37 40 54.3
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 58.9 +/- 8.1
  Background counts = 6.0
  Rate = 0.003 +/- 0.0004
[Sat Oct  1 04:11:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 04:11:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 04:11:43 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 04:11:43 2011] Source does appear to be extended
[Sat Oct  1 04:11:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 04:12:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 04:12:11 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct  1 04:12:11 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.057
[Sat Oct  1 04:12:11 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.47"
[Sat Oct  1 04:12:12 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct  1 04:12:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01655_pi14-548_cl_pass1_src3.csv
[Sat Oct  1 04:12:12 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct  1 04:12:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01655_pi14-548_cl_pass1_src3.csv
[Sat Oct  1 04:12:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01655_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01655_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 04:12:12 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct  1 04:12:12 2011] fullrun_ccd2_acisf01655_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct  1 04:12:12 2011] Fit fullrun_ccd2_acisf01655_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct  1 04:12:27 2011] Spatial fit model total counts = 65.183200, observed total counts = 65.000000
[Sat Oct  1 04:12:27 2011] Offset between fit and detection position for source 3 = 0.005028 pixels
[Sat Oct  1 04:12:27 2011] 65.597910 total counts/ 6.058110 bgd. counts: snr = 24.190163
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.005028 pixels
  Position = (656.8, 939.5) = 7 17 11.70 37 40 54.3
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 59.5 +/- 8.1
  Background counts = 6.1
  Rate = 0.003 +/- 0.0004
[Sat Oct  1 04:12:27 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 04:12:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 04:12:27 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 04:12:27 2011] Source does appear to be extended
[Sat Oct  1 04:12:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 04:14:01 2011] Not overwriting source region fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.reg
[Sat Oct  1 04:14:01 2011] Extracting stamp from image fullrun_ccd2_acisf01655_pi14-548_cl_sm2.00.img.gz, (636, 918) - (678, 961)
[Sat Oct  1 04:14:01 2011] Writing fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3.gif
[Sat Oct  1 04:14:12 2011] ../../acisf01655/products/events/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.evt and ../../acisf01655/products/events/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct  1 04:14:12 2011] Size of ../../acisf01655/products/events/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.evt.gz[events] = 61 counts
[Sat Oct  1 04:14:12 2011] Mean chipx,y = (392.66, 726.92)
[Sat Oct  1 04:14:12 2011] Mean tdetx,y = (3787.92, 3693.34)
[Sat Oct  1 04:14:12 2011] chipx,y range = (372.00-407.00, 710.00-745.00)
[Sat Oct  1 04:14:12 2011] Size of ../../acisf01655/products/events/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Sat Oct  1 04:14:12 2011] ../../acisf01655/products/images/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.img and ../../acisf01655/products/images/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct  1 04:14:12 2011] ../../acisf01655/products/spectra/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.pi and ../../acisf01655/products/spectra/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct  1 04:14:12 2011] Not generating rmf since there are only 59 counts
[Sat Oct  1 04:14:15 2011] ../../acisf01655/products/lightcurves/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.lc and ../../acisf01655/products/lightcurves/fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct  1 04:16:09 2011] 202.291
[Sat Oct  1 04:17:58 2011] Updating aperture counts using extracted products
[Sat Oct  1 04:17:58 2011] Error reading totcts from fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct  1 04:17:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 04:17:59 2011] Using photon index=1.80, rate=0.003, arf fullrun_ccd2_acisf01655_pi14-548_pass1_cl_src3.arf
[Sat Oct  1 04:17:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 04:17:59 2011] Updating source flux to 3.1e-14
[Sat Oct  1 04:18:04 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting