[Mon Oct 17 05:16:24 2011] Detection parameters:
  Position = (765.1, 445.6) = 16 16 10.55 -6 13 58.7
  Extent = 0.8" x 0.5", rotation angle = 121 degrees
  Source counts = 34.3 +/- 6.2
  Background counts = 4.7
  Rate = 0.0005 +/- 9e-05

[Mon Oct 17 05:16:25 2011] Off-axis axis estimate = 5.53'
[Mon Oct 17 05:17:49 2011] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 05:17:49 2011] Initial guess for spatial extent in simple fitting = 1.41"
[Mon Oct 17 05:17:49 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.932
[Mon Oct 17 05:17:49 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.41"
[Mon Oct 17 05:17:50 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass0_src12.ximg exists
[Mon Oct 17 05:17:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01653_pi14-548_cl_pass0_src12.csv
[Mon Oct 17 05:17:50 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass0_src12_1.ximg exists
[Mon Oct 17 05:17:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01653_pi14-548_cl_pass0_src12.csv
[Mon Oct 17 05:17:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01653_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01653_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 05:17:50 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon Oct 17 05:17:50 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Oct 17 05:17:50 2011] Fit fullrun_ccd3_acisf01653_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Oct 17 05:18:02 2011] Spatial fit model total counts = 43.882400, observed total counts = 44.000000
[Mon Oct 17 05:18:02 2011] Offset between fit and detection position for source 30 = 0.729052 pixels
[Mon Oct 17 05:18:02 2011] 45.664100 total counts/ 23.144200 bgd. counts: snr = 4.681073
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.729052 pixels
  Position = (765.4, 446.3) = 16 16 10.56 -6 13 58.6
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 22.5 +/- 6.8
  Background counts = 23.1
  Rate = 0.0003 +/- 9e-05
[Mon Oct 17 05:18:02 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 05:18:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 05:18:02 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 05:18:02 2011] Source does appear to be extended
[Mon Oct 17 05:18:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 05:18:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 05:18:25 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Oct 17 05:18:25 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.148
[Mon Oct 17 05:18:25 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.90"
[Mon Oct 17 05:18:26 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass1_src12.ximg exists
[Mon Oct 17 05:18:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01653_pi14-548_cl_pass1_src12.csv
[Mon Oct 17 05:18:26 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass1_src12_1.ximg exists
[Mon Oct 17 05:18:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01653_pi14-548_cl_pass1_src12.csv
[Mon Oct 17 05:18:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01653_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01653_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 05:18:26 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Mon Oct 17 05:18:26 2011] fullrun_ccd3_acisf01653_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Oct 17 05:18:26 2011] Fit fullrun_ccd3_acisf01653_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Oct 17 05:18:37 2011] Spatial fit model total counts = 42.589600, observed total counts = 43.000000
[Mon Oct 17 05:18:37 2011] Offset between fit and detection position for source 30 = 0.385094 pixels
[Mon Oct 17 05:18:37 2011] 44.568900 total counts/ 24.042800 bgd. counts: snr = 4.186142
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.385094 pixels
  Position = (765.2, 446.6) = 16 16 10.56 -6 13 58.5
  Extent = 0.8 (0.6-1.5)", rotation angle = 0
  Source counts = 20.5 +/- 6.7
  Background counts = 24.0
  Rate = 0.0003 +/- 9e-05
[Mon Oct 17 05:18:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 05:18:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 05:18:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 05:18:37 2011] Source does appear to be extended
[Mon Oct 17 05:18:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 05:24:27 2011] Not overwriting source region fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.reg
[Mon Oct 17 05:24:27 2011] Extracting stamp from image fullrun_ccd3_acisf01653_pi14-548_cl_sm2.00.img.gz, (727, 408) - (803, 485)
[Mon Oct 17 05:24:27 2011] Writing fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30.gif
[Mon Oct 17 05:25:47 2011] ../../acisf01653/products/events/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.evt and ../../acisf01653/products/events/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Mon Oct 17 05:25:47 2011] Size of ../../acisf01653/products/events/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.evt.gz[events] = 36 counts
[Mon Oct 17 05:25:47 2011] Mean chipx,y = (351.86, 730.94)
[Mon Oct 17 05:25:47 2011] Mean tdetx,y = (4401.06, 3412.86)
[Mon Oct 17 05:25:47 2011] chipx,y range = (333.00-367.00, 710.00-751.00)
[Mon Oct 17 05:25:47 2011] Size of ../../acisf01653/products/events/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 49 counts
[Mon Oct 17 05:25:47 2011] ../../acisf01653/products/images/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.img and ../../acisf01653/products/images/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Mon Oct 17 05:25:47 2011] Not generating rmf since there are only 20 counts
[Mon Oct 17 05:25:47 2011] arf not found, will run specextract
[Mon Oct 17 05:25:49 2011] ../../acisf01653/products/spectra/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_bkg.pi not found
[Mon Oct 17 05:25:49 2011] ../../acisf01653/products/spectra/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30.warf not found
[Mon Oct 17 05:25:49 2011] ../../acisf01653/products/spectra/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30.wrmf not found
[Mon Oct 17 05:25:49 2011] Removal of ../../acisf01653/products/spectra/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30.soff failed
[Mon Oct 17 05:25:49 2011] Failed to rename ../../acisf01653/products/spectra/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_grp.pi to ../../acisf01653/products/spectra/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.pi
[Mon Oct 17 05:25:54 2011] ../../acisf01653/products/lightcurves/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.lc and ../../acisf01653/products/lightcurves/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Mon Oct 17 05:27:26 2011] No arf file found
[Mon Oct 17 05:27:51 2011] Updating aperture counts using extracted products
[Mon Oct 17 05:27:51 2011] Error reading totcts from fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_src.pi
[Mon Oct 17 05:27:51 2011] No arf file for this source, not re-computing flux
[Mon Oct 17 05:27:57 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 05:27:58 2011] acisf01653/analysis//spectral/fullrun_ccd3_acisf01653_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete