[Sat Oct  1 19:32:06 2011] Detection parameters:
  Position = (580.3, 950.2) = 8 21 2.03 7 53 33.6
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 11.0 +/- 3.5
  Background counts = 1.0
  Rate = 0.001 +/- 0.0004

[Sat Oct  1 19:32:08 2011] Off-axis axis estimate = 0.67'
[Sat Oct  1 19:32:44 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 19:32:44 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct  1 19:32:44 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.367
[Sat Oct  1 19:32:44 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.39"
[Sat Oct  1 19:32:45 2011] fullrun_ccd7_acisf01647_pi14-548_cl_pass0_src18.ximg exists
[Sat Oct  1 19:32:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01647_pi14-548_cl_pass0_src18.csv
[Sat Oct  1 19:32:45 2011] fullrun_ccd7_acisf01647_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Oct  1 19:32:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01647_pi14-548_cl_pass0_src18.csv
[Sat Oct  1 19:32:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01647_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01647_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 19:32:45 2011] fullrun_ccd7_acisf01647_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Oct  1 19:32:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01647_pi14-548_cl_pass0_tfrozen_src18.csv
[Sat Oct  1 19:32:45 2011] fullrun_ccd7_acisf01647_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Oct  1 19:32:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01647_pi14-548_cl_pass0_tfrozen_src18.csv
[Sat Oct  1 19:32:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01647_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01647_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 19:32:53 2011] Spatial fit model total counts = 13.058800, observed total counts = 16.000000
[Sat Oct  1 19:32:53 2011] Offset between fit and detection position for source 15 = 0.489025 pixels
[Sat Oct  1 19:32:53 2011] 14.089500 total counts/ 3.981400 bgd. counts: snr = 5.065842
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.489025 pixels
  Position = (580.6, 950.7) = 8 21 2.04 7 53 33.6
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 10.1 +/- 3.8
  Background counts = 4.0
  Rate = 0.001 +/- 0.0004
[Sat Oct  1 19:32:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 19:32:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 19:32:53 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 19:32:53 2011] Source does appear to be extended
[Sat Oct  1 19:32:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 19:32:53 2011] Deleting source due to low Poisson probability 0.9