[Tue Oct 18 10:40:50 2011] Detection parameters:
  Position = (824.1, 1025.3) = 21 56 29.55 -69 39 5.5
  Extent = 0.9" x 0.5", rotation angle = 122 degrees
  Source counts = 65.7 +/- 8.2
  Background counts = 2.3
  Rate = 0.005 +/- 0.0006

[Tue Oct 18 10:40:51 2011] Off-axis axis estimate = 4.33'
[Tue Oct 18 10:41:23 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 10:41:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 10:41:23 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Tue Oct 18 10:41:23 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.866
[Tue Oct 18 10:41:23 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.94"
[Tue Oct 18 10:41:23 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct 18 10:41:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01627_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 10:41:23 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct 18 10:41:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01627_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 10:41:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01627_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01627_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 10:41:23 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct 18 10:41:23 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct 18 10:41:23 2011] Fit fullrun_ccd7_acisf01627_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct 18 10:41:29 2011] Spatial fit model total counts = 67.985800, observed total counts = 70.000000
[Tue Oct 18 10:41:29 2011] Offset between fit and detection position for source 3 = 0.926783 pixels
[Tue Oct 18 10:41:29 2011] 68.020143 total counts/ 0.511543 bgd. counts: snr = 94.388271
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.926783 pixels
  Position = (824.3, 1026.2) = 21 56 29.58 -69 39 5.3
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 67.5 +/- 8.2
  Background counts = 0.5
  Rate = 0.005 +/- 0.0006
[Tue Oct 18 10:41:29 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 10:41:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 10:41:29 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 10:41:29 2011] Source does appear to be extended
[Tue Oct 18 10:41:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 10:41:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 10:41:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 10:41:41 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Tue Oct 18 10:41:41 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.089
[Tue Oct 18 10:41:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.93"
[Tue Oct 18 10:41:42 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct 18 10:41:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01627_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 10:41:42 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct 18 10:41:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01627_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 10:41:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01627_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01627_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 10:41:42 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct 18 10:41:42 2011] fullrun_ccd7_acisf01627_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct 18 10:41:42 2011] Fit fullrun_ccd7_acisf01627_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Oct 18 10:41:48 2011] Spatial fit model total counts = 66.549400, observed total counts = 68.000000
[Tue Oct 18 10:41:48 2011] Offset between fit and detection position for source 3 = 0.077168 pixels
[Tue Oct 18 10:41:48 2011] 66.750410 total counts/ 0.347310 bgd. counts: snr = 112.675556
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.077168 pixels
  Position = (824.3, 1026.1) = 21 56 29.58 -69 39 5.4
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 66.4 +/- 8.2
  Background counts = 0.3
  Rate = 0.005 +/- 0.0006
[Tue Oct 18 10:41:48 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 10:41:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 10:41:48 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 10:41:48 2011] Source does appear to be extended
[Tue Oct 18 10:41:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 10:42:57 2011] Not overwriting source region fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.reg
[Tue Oct 18 10:42:57 2011] Extracting stamp from image fullrun_ccd7_acisf01627_pi14-548_cl_sm2.00.img.gz, (783, 985) - (866, 1068)
[Tue Oct 18 10:42:57 2011] Writing fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3.gif
[Tue Oct 18 10:43:12 2011] ../../acisf01627/products/events/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.evt and ../../acisf01627/products/events/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct 18 10:43:12 2011] Size of ../../acisf01627/products/events/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.evt.gz[events] = 68 counts
[Tue Oct 18 10:43:12 2011] Mean chipx,y = (553.07, 106.49)
[Tue Oct 18 10:43:12 2011] Mean tdetx,y = (4470.07, 1808.49)
[Tue Oct 18 10:43:12 2011] chipx,y range = (534.00-571.00, 90.00-126.00)
[Tue Oct 18 10:43:12 2011] Size of ../../acisf01627/products/events/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 29 counts
[Tue Oct 18 10:43:12 2011] ../../acisf01627/products/images/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.img and ../../acisf01627/products/images/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct 18 10:43:12 2011] Not generating rmf since there are only 66 counts
[Tue Oct 18 10:43:12 2011] arf not found, will run specextract
[Tue Oct 18 10:43:14 2011] ../../acisf01627/products/spectra/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_bkg.pi not found
[Tue Oct 18 10:43:14 2011] ../../acisf01627/products/spectra/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3.warf not found
[Tue Oct 18 10:43:14 2011] ../../acisf01627/products/spectra/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3.wrmf not found
[Tue Oct 18 10:43:14 2011] Removal of ../../acisf01627/products/spectra/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3.soff failed
[Tue Oct 18 10:43:14 2011] Failed to rename ../../acisf01627/products/spectra/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_grp.pi to ../../acisf01627/products/spectra/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.pi
[Tue Oct 18 10:43:19 2011] ../../acisf01627/products/lightcurves/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.lc and ../../acisf01627/products/lightcurves/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct 18 10:44:35 2011] No arf file found
[Tue Oct 18 10:44:37 2011] Updating aperture counts using extracted products
[Tue Oct 18 10:44:37 2011] Error reading totcts from fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_src.pi
[Tue Oct 18 10:44:37 2011] No arf file for this source, not re-computing flux
[Tue Oct 18 10:44:43 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 10:44:44 2011] acisf01627/analysis//spectral/fullrun_ccd7_acisf01627_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete