[Tue Apr 10 16:15:24 2012] Detection parameters:
  Position = (1013.7, 854.2) = 13 29 42.19 47 14 47.9
  Extent = 0.7" x 0.5", rotation angle = 66 degrees
  Source counts = 20.5 +/- 4.7
  Background counts = 1.5
  Rate = 0.0008 +/- 0.0002

[Tue Apr 10 16:15:27 2012] Off-axis axis estimate = 3.60'
[Tue Apr 10 16:16:27 2012] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:16:27 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Tue Apr 10 16:16:27 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.040
[Tue Apr 10 16:16:27 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 0.72"
[Tue Apr 10 16:16:30 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass0_src56.ximg exists
[Tue Apr 10 16:16:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01622_pi14-548_cl_pass0_src56.csv
[Tue Apr 10 16:16:30 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass0_src56_1.ximg exists
[Tue Apr 10 16:16:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01622_pi14-548_cl_pass0_src56.csv
[Tue Apr 10 16:16:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01622_pi14-548_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01622_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:16:32 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Tue Apr 10 16:16:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01622_pi14-548_cl_pass0_tfrozen_src56.csv
[Tue Apr 10 16:16:32 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Apr 10 16:16:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01622_pi14-548_cl_pass0_tfrozen_src56.csv
[Tue Apr 10 16:16:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01622_pi14-548_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01622_pi14-548_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:16:53 2012] Spatial fit model total counts = 22.680500, observed total counts = 25.000000
[Tue Apr 10 16:16:53 2012] Offset between fit and detection position for source 73 = 0.775878 pixels
[Tue Apr 10 16:16:53 2012] 21.864225 total counts/ 0.070625 bgd. counts: snr = 82.006951
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.775878 pixels
  Position = (1014.3, 854.8) = 13 29 42.19 47 14 48.0
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 21.8 +/- 4.7
  Background counts = 0.1
  Rate = 0.0008 +/- 0.0002
[Tue Apr 10 16:16:53 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:16:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:16:53 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:16:53 2012] Source does appear to be extended
[Tue Apr 10 16:16:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:17:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:17:13 2012] Initial guess for spatial extent in simple fitting = 0.82"
[Tue Apr 10 16:17:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Tue Apr 10 16:17:13 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 0.82"
[Tue Apr 10 16:17:15 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass1_src55.ximg exists
[Tue Apr 10 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01622_pi14-548_cl_pass1_src55.csv
[Tue Apr 10 16:17:15 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass1_src55_1.ximg exists
[Tue Apr 10 16:17:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01622_pi14-548_cl_pass1_src55.csv
[Tue Apr 10 16:17:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01622_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01622_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:17:18 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Tue Apr 10 16:17:18 2012] fullrun_ccd7_acisf01622_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Apr 10 16:17:18 2012] Fit fullrun_ccd7_acisf01622_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Apr 10 16:17:34 2012] Spatial fit model total counts = 23.230300, observed total counts = 25.000000
[Tue Apr 10 16:17:34 2012] Offset between fit and detection position for source 73 = 0.024020 pixels
[Tue Apr 10 16:17:34 2012] 22.641322 total counts/ 0.011721 bgd. counts: snr = 209.018767
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.024020 pixels
  Position = (1014.3, 854.8) = 13 29 42.19 47 14 48.0
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 22.6 +/- 4.8
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Apr 10 16:17:34 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:17:34 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:17:34 2012] Source does appear to be extended
[Tue Apr 10 16:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:21:37 2012] Not overwriting source region fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.reg
[Tue Apr 10 16:21:37 2012] Extracting stamp from image fullrun_ccd7_acisf01622_pi14-548_cl_sm2.00.img.gz, (978, 818) - (1051, 891)
[Tue Apr 10 16:21:37 2012] Writing fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73.gif
[Tue Apr 10 16:28:04 2012] ../../acisf01622/products/events/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.evt and ../../acisf01622/products/events/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_bgd.evt exist, delete to re-create
[Tue Apr 10 16:28:04 2012] Size of ../../acisf01622/products/events/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.evt.gz[events] = 23 counts
[Tue Apr 10 16:28:04 2012] Mean chipx,y = (489.13, 861.43)
[Tue Apr 10 16:28:04 2012] Mean tdetx,y = (4406.13, 2563.43)
[Tue Apr 10 16:28:04 2012] chipx,y range = (471.00-508.00, 842.00-880.00)
[Tue Apr 10 16:28:05 2012] Size of ../../acisf01622/products/events/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_bgd.evt.gz[events] = 17 counts
[Tue Apr 10 16:28:05 2012] ../../acisf01622/products/images/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.img and ../../acisf01622/products/images/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_bgd.img exist, delete to re-create
[Tue Apr 10 16:28:05 2012] Not generating rmf since there are only 22 counts
[Tue Apr 10 16:28:05 2012] arf not found, will run specextract
[Tue Apr 10 16:28:06 2012] ../../acisf01622/products/spectra/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_bkg.pi not found
[Tue Apr 10 16:28:06 2012] ../../acisf01622/products/spectra/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73.warf not found
[Tue Apr 10 16:28:06 2012] ../../acisf01622/products/spectra/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73.wrmf not found
[Tue Apr 10 16:28:06 2012] Removal of ../../acisf01622/products/spectra/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73.soff failed
[Tue Apr 10 16:28:06 2012] Failed to rename ../../acisf01622/products/spectra/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_grp.pi to ../../acisf01622/products/spectra/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.pi
[Tue Apr 10 16:28:12 2012] ../../acisf01622/products/lightcurves/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.lc and ../../acisf01622/products/lightcurves/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_bgd.lc exist, delete to re-create
[Tue Apr 10 16:29:06 2012] No arf file found
[Tue Apr 10 16:29:11 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:29:11 2012] Error reading totcts from fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_src.pi
[Tue Apr 10 16:29:11 2012] No arf file for this source, not re-computing flux
[Tue Apr 10 16:29:18 2012] Source 73 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Apr 10 16:29:19 2012] acisf01622/analysis//spectral/fullrun_ccd7_acisf01622_pi14-548_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete