[Fri Sep 23 16:17:18 2011] Detection parameters:
  Position = (567.8, 200.2) = 6 25 29.68 82 5 23.9
  Extent = 0.7" x 0.5", rotation angle = 94 degrees
  Source counts = 125.9 +/- 11.3
  Background counts = 2.1
  Rate = 0.003 +/- 0.0002

[Fri Sep 23 16:17:18 2011] Off-axis axis estimate = 2.62'
[Fri Sep 23 16:18:25 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:18:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 16:18:25 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Sep 23 16:18:25 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.948
[Fri Sep 23 16:18:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.51"
[Fri Sep 23 16:18:27 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 16:18:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01602_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 16:18:27 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 16:18:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01602_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 16:18:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01602_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01602_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:18:29 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 16:18:29 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 16:18:29 2011] Fit fullrun_ccd6_acisf01602_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 16:18:50 2011] Spatial fit model total counts = 128.802000, observed total counts = 129.000000
[Fri Sep 23 16:18:50 2011] Offset between fit and detection position for source 29 = 0.624952 pixels
[Fri Sep 23 16:18:50 2011] 128.974700 total counts/ 10.614700 bgd. counts: snr = 36.328803
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.624952 pixels
  Position = (568.1, 200.7) = 6 25 29.71 82 5 23.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 118.4 +/- 11.4
  Background counts = 10.6
  Rate = 0.003 +/- 0.0002
[Fri Sep 23 16:18:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:18:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:18:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:18:50 2011] Source does appear to be extended
[Fri Sep 23 16:18:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:19:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:19:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 16:19:20 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 23 16:19:20 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Fri Sep 23 16:19:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.69"
[Fri Sep 23 16:19:21 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 16:19:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01602_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 16:19:21 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 16:19:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01602_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 16:19:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01602_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01602_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:19:21 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 16:19:21 2011] fullrun_ccd6_acisf01602_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 16:19:21 2011] Fit fullrun_ccd6_acisf01602_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 16:19:33 2011] Spatial fit model total counts = 126.549000, observed total counts = 128.000000
[Fri Sep 23 16:19:33 2011] Offset between fit and detection position for source 29 = 0.005976 pixels
[Fri Sep 23 16:19:33 2011] 127.036360 total counts/ 5.929360 bgd. counts: snr = 49.735368
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.005976 pixels
  Position = (568.1, 200.7) = 6 25 29.71 82 5 23.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 121.1 +/- 11.3
  Background counts = 5.9
  Rate = 0.003 +/- 0.0002
[Fri Sep 23 16:19:33 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:19:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:19:33 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:19:33 2011] Source does appear to be extended
[Fri Sep 23 16:19:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:21:24 2011] Not overwriting source region fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.reg
[Fri Sep 23 16:21:24 2011] Extracting stamp from image fullrun_ccd6_acisf01602_pi14-548_cl_sm2.00.img.gz, (534, 167) - (602, 234)
[Fri Sep 23 16:21:25 2011] Writing fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29.gif
[Fri Sep 23 16:21:27 2011] ../../acisf01602/products/events/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.evt and ../../acisf01602/products/events/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Fri Sep 23 16:21:27 2011] Size of ../../acisf01602/products/events/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.evt.gz[events] = 127 counts
[Fri Sep 23 16:21:27 2011] Mean chipx,y = (939.06, 465.46)
[Fri Sep 23 16:21:27 2011] Mean tdetx,y = (3814.06, 2167.46)
[Fri Sep 23 16:21:27 2011] chipx,y range = (921.00-956.00, 446.00-486.00)
[Fri Sep 23 16:21:27 2011] Size of ../../acisf01602/products/events/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 12 counts
[Fri Sep 23 16:21:27 2011] ../../acisf01602/products/images/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.img and ../../acisf01602/products/images/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Fri Sep 23 16:21:27 2011] ../../acisf01602/products/spectra/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.pi and ../../acisf01602/products/spectra/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Fri Sep 23 16:21:33 2011] ../../acisf01602/products/lightcurves/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.lc and ../../acisf01602/products/lightcurves/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Fri Sep 23 16:23:03 2011] Keeping rmf generated by specextract
[Fri Sep 23 16:23:03 2011] 214.675
[Fri Sep 23 16:24:38 2011] Updating aperture counts using extracted products
[Fri Sep 23 16:24:38 2011] Error reading totcts from fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_src.pi.gz
[Fri Sep 23 16:24:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:24:38 2011] Using photon index=1.80, rate=0.00256, arf fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29.arf
[Fri Sep 23 16:24:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:24:38 2011] Updating source flux to 2.4e-14
[Fri Sep 23 16:25:05 2011] Reading fit data from acisf01602/analysis//spectral/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_pl.csv
[Fri Sep 23 16:25:05 2011] Spectral fit parameter nH value = 5.6123e+21
[Fri Sep 23 16:25:05 2011] Spectral fit parameter PhoIndex value = 1.3585
[Fri Sep 23 16:25:05 2011] Failed to get F(0.3-8.0) from acisf01602/analysis//spectral/fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 16:25:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:25:05 2011] Using Nh = 5.6e+21, photon index=1.36, rate=0.00256, arf fullrun_ccd6_acisf01602_pi14-548_pass1_cl_src29.arf
[Fri Sep 23 16:25:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:25:05 2011] Updating source flux to 3.7e-14