[Fri Sep 23 16:17:13 2011] Detection parameters:
  Position = (960.3, 341.2) = 6 30 20.32 81 59 38.0
  Extent = 3.3" x 2.9", rotation angle = 103 degrees
  Source counts = 151.9 +/- 13.3
  Background counts = 26.1
  Rate = 0.003 +/- 0.0003

[Fri Sep 23 16:17:13 2011] Off-axis axis estimate = 9.60'
[Fri Sep 23 16:18:24 2011] Using EEF radius (= 4.08 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:18:24 2011] Initial guess for spatial extent in simple fitting = 4.08"
[Fri Sep 23 16:18:24 2011] source mask rpix=8.3, npix_max = 309, mask sum = 306, frac = 0.990
[Fri Sep 23 16:18:24 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 4.08"
[Fri Sep 23 16:18:24 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 23 16:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01602_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 16:18:24 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 23 16:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01602_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 16:18:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01602_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01602_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:18:24 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 16:18:24 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 16:18:24 2011] Fit fullrun_ccd3_acisf01602_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 16:18:48 2011] Spatial fit model total counts = 176.872000, observed total counts = 177.000000
[Fri Sep 23 16:18:48 2011] Offset between fit and detection position for source 7 = 1.388738 pixels
[Fri Sep 23 16:18:48 2011] 177.440300 total counts/ 22.753300 bgd. counts: snr = 32.428855
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.388738 pixels
  Position = (960.7, 339.9) = 6 30 20.34 81 59 37.1
  Extent = 3.5 (2.9-4.1)", rotation angle = 0
  Source counts = 154.7 +/- 13.3
  Background counts = 22.8
  Rate = 0.003 +/- 0.0003
[Fri Sep 23 16:18:48 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:18:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:18:48 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:18:48 2011] Source does appear to be extended
[Fri Sep 23 16:18:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:19:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:19:19 2011] Initial guess for spatial extent in simple fitting = 3.47"
[Fri Sep 23 16:19:19 2011] source mask rpix=7.0, npix_max = 227, mask sum = 225, frac = 0.987
[Fri Sep 23 16:19:19 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.47"
[Fri Sep 23 16:19:20 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 16:19:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01602_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 16:19:20 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 16:19:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01602_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 16:19:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01602_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01602_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:19:20 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 16:19:20 2011] fullrun_ccd3_acisf01602_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 16:19:20 2011] Fit fullrun_ccd3_acisf01602_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 16:19:29 2011] Spatial fit model total counts = 168.533000, observed total counts = 169.000000
[Fri Sep 23 16:19:29 2011] Offset between fit and detection position for source 7 = 0.281127 pixels
[Fri Sep 23 16:19:29 2011] 169.077800 total counts/ 20.454800 bgd. counts: snr = 32.861577
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.281127 pixels
  Position = (960.4, 339.9) = 6 30 20.40 81 59 37.1
  Extent = 3.4 (2.6-4.0)", rotation angle = 0
  Source counts = 148.6 +/- 13.0
  Background counts = 20.5
  Rate = 0.003 +/- 0.0003
[Fri Sep 23 16:19:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:19:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:19:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:19:29 2011] Source does appear to be extended
[Fri Sep 23 16:19:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:20:35 2011] Not overwriting source region fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.reg
[Fri Sep 23 16:20:35 2011] Extracting stamp from image fullrun_ccd3_acisf01602_pi14-548_cl_sm2.00.img.gz, (806, 186) - (1114, 494)
[Fri Sep 23 16:20:35 2011] Writing fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7.gif
[Fri Sep 23 16:20:46 2011] ../../acisf01602/products/events/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.evt and ../../acisf01602/products/events/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Sep 23 16:20:46 2011] Size of ../../acisf01602/products/events/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.evt.gz[events] = 177 counts
[Fri Sep 23 16:20:46 2011] Mean chipx,y = (114.74, 324.85)
[Fri Sep 23 16:20:46 2011] Mean tdetx,y = (4807.15, 3175.74)
[Fri Sep 23 16:20:46 2011] chipx,y range = (81.00-148.00, 295.00-359.00)
[Fri Sep 23 16:20:46 2011] Size of ../../acisf01602/products/events/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 269 counts
[Fri Sep 23 16:20:46 2011] ../../acisf01602/products/images/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.img and ../../acisf01602/products/images/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Sep 23 16:20:46 2011] ../../acisf01602/products/spectra/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.pi and ../../acisf01602/products/spectra/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Sep 23 16:20:49 2011] ../../acisf01602/products/lightcurves/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.lc and ../../acisf01602/products/lightcurves/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Sep 23 16:21:12 2011] Keeping rmf generated by specextract
[Fri Sep 23 16:21:12 2011] 166.163
[Fri Sep 23 16:24:38 2011] Updating aperture counts using extracted products
[Fri Sep 23 16:24:38 2011] Error reading totcts from fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Sep 23 16:24:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:24:38 2011] Using photon index=1.80, rate=0.00314, arf fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7.arf
[Fri Sep 23 16:24:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:24:38 2011] Updating source flux to 4.1e-14
[Fri Sep 23 16:24:51 2011] Reading fit data from acisf01602/analysis//spectral/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_pl.csv
[Fri Sep 23 16:24:51 2011] Spectral fit parameter nH value = 4.41055e+20
[Fri Sep 23 16:24:51 2011] Spectral fit parameter PhoIndex value = 2.53113
[Fri Sep 23 16:24:51 2011] Failed to get F(0.3-8.0) from acisf01602/analysis//spectral/fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 16:24:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:24:51 2011] Using Nh = 4.4e+20, photon index=2.53, rate=0.00314, arf fullrun_ccd3_acisf01602_pi14-548_pass1_cl_src7.arf
[Fri Sep 23 16:24:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:24:51 2011] Updating source flux to 3.8e-14