[Tue Nov  1 05:21:59 2011] Detection parameters:
  Position = (839.4, 891.3) = 13 7 51.61 6 44 54.1
  Extent = 0.6" x 0.5", rotation angle = 33 degrees
  Source counts = 30.9 +/- 5.7
  Background counts = 1.1
  Rate = 0.002 +/- 0.0004

[Tue Nov  1 05:22:00 2011] Off-axis axis estimate = 3.68'
[Tue Nov  1 05:22:59 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 05:22:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 05:22:59 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Tue Nov  1 05:22:59 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.998
[Tue Nov  1 05:22:59 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.74"
[Tue Nov  1 05:23:03 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass0_src10.ximg exists
[Tue Nov  1 05:23:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf01593_pi14-548_cl_pass0_src10.csv
[Tue Nov  1 05:23:03 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Nov  1 05:23:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf01593_pi14-548_cl_pass0_src10.csv
[Tue Nov  1 05:23:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01593_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01593_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 05:23:04 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Nov  1 05:23:04 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Nov  1 05:23:04 2011] Fit fullrun_ccd7_acisf01593_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Nov  1 05:23:12 2011] Spatial fit model total counts = 29.884900, observed total counts = 32.000000
[Tue Nov  1 05:23:12 2011] Offset between fit and detection position for source 18 = 0.361653 pixels
[Tue Nov  1 05:23:12 2011] 30.978670 total counts/ 1.179170 bgd. counts: snr = 27.442316
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.361653 pixels
  Position = (839.6, 891.6) = 13 7 51.62 6 44 54.0
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 29.8 +/- 5.6
  Background counts = 1.2
  Rate = 0.002 +/- 0.0004
[Tue Nov  1 05:23:12 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 05:23:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 05:23:12 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 05:23:12 2011] Source does appear to be extended
[Tue Nov  1 05:23:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 05:23:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 05:23:29 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Nov  1 05:23:29 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.055
[Tue Nov  1 05:23:29 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.71"
[Tue Nov  1 05:23:29 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass1_src10.ximg exists
[Tue Nov  1 05:23:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01593_pi14-548_cl_pass1_src10.csv
[Tue Nov  1 05:23:29 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Nov  1 05:23:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01593_pi14-548_cl_pass1_src10.csv
[Tue Nov  1 05:23:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01593_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01593_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 05:23:30 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Nov  1 05:23:30 2011] fullrun_ccd7_acisf01593_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Nov  1 05:23:30 2011] Fit fullrun_ccd7_acisf01593_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Nov  1 05:23:40 2011] Spatial fit model total counts = 29.232800, observed total counts = 32.000000
[Tue Nov  1 05:23:40 2011] Offset between fit and detection position for source 18 = 0.038370 pixels
[Tue Nov  1 05:23:40 2011] 30.514922 total counts/ 0.011322 bgd. counts: snr = 286.678601
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.038370 pixels
  Position = (839.6, 891.6) = 13 7 51.62 6 44 54.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 30.5 +/- 5.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Tue Nov  1 05:23:40 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 05:23:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 05:23:40 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 05:23:40 2011] Source does appear to be extended
[Tue Nov  1 05:23:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 05:25:12 2011] Not overwriting source region fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.reg
[Tue Nov  1 05:25:12 2011] Extracting stamp from image fullrun_ccd7_acisf01593_pi14-548_cl_sm2.00.img.gz, (806, 858) - (874, 926)
[Tue Nov  1 05:25:12 2011] Writing fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18.gif
[Tue Nov  1 05:25:44 2011] ../../acisf01593/products/events/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.evt and ../../acisf01593/products/events/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Nov  1 05:25:44 2011] Size of ../../acisf01593/products/events/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.evt.gz[events] = 31 counts
[Tue Nov  1 05:25:44 2011] Mean chipx,y = (612.58, 733.00)
[Tue Nov  1 05:25:44 2011] Mean tdetx,y = (4529.58, 2435.00)
[Tue Nov  1 05:25:44 2011] chipx,y range = (593.00-630.00, 719.00-755.00)
[Tue Nov  1 05:25:44 2011] Size of ../../acisf01593/products/events/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 6 counts
[Tue Nov  1 05:25:44 2011] ../../acisf01593/products/images/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.img and ../../acisf01593/products/images/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Nov  1 05:25:44 2011] ../../acisf01593/products/spectra/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.pi and ../../acisf01593/products/spectra/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Nov  1 05:25:44 2011] Not generating rmf since there are only 30 counts
[Tue Nov  1 05:25:47 2011] ../../acisf01593/products/lightcurves/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.lc and ../../acisf01593/products/lightcurves/fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Nov  1 05:26:31 2011] 232.54
[Tue Nov  1 05:26:34 2011] Updating aperture counts using extracted products
[Tue Nov  1 05:26:34 2011] Error reading totcts from fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18_src.pi.gz
[Tue Nov  1 05:26:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:26:34 2011] Using photon index=1.80, rate=0.00192, arf fullrun_ccd7_acisf01593_pi14-548_pass1_cl_src18.arf
[Tue Nov  1 05:26:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 05:26:34 2011] Updating source flux to 1.2e-14
[Tue Nov  1 05:26:44 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting