[Sat Oct 29 05:25:01 2011] Detection parameters:
  Position = (306.7, 264.3) = 16 52 59.85 2 14 36.9
  Extent = 3.2" x 2.6", rotation angle = 24 degrees
  Source counts = 20.0 +/- 5.7
  Background counts = 12.0
  Rate = 0.0005 +/- 0.0002

[Sat Oct 29 05:25:01 2011] Off-axis axis estimate = 8.98'
[Sat Oct 29 05:25:57 2011] Using EEF radius (= 3.56 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:25:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 05:25:57 2011] Initial guess for spatial extent in simple fitting = 3.56"
[Sat Oct 29 05:25:57 2011] source mask rpix=7.2, npix_max = 239, mask sum = 225, frac = 0.939
[Sat Oct 29 05:25:57 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 3.56"
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src12.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src12.csv
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src12.csv
[Sat Oct 29 05:25:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Oct 29 05:25:58 2011] Fit fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Oct 29 05:26:09 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 40.949095 pixels away
[Sat Oct 29 05:26:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:26:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:26:09 2011] Assessing source extent using major
[Sat Oct 29 05:26:09 2011] Source does appear to be extended
[Sat Oct 29 05:26:09 2011] Computing asymmetry using major and minor axis, asym = 1.21
[Sat Oct 29 05:26:31 2011] Using EEF radius (= 3.56 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:26:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 05:26:31 2011] Initial guess for spatial extent in simple fitting = 3.56"
[Sat Oct 29 05:26:31 2011] source mask rpix=7.2, npix_max = 239, mask sum = 225, frac = 0.939
[Sat Oct 29 05:26:31 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 3.56"
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct 29 05:26:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src11.csv
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct 29 05:26:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src11.csv
[Sat Oct 29 05:26:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 29 05:26:32 2011] Fit fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 29 05:26:44 2011] Spatial fit model total counts = 40.363800, observed total counts = 41.000000
[Sat Oct 29 05:26:44 2011] Offset between fit and detection position for source 23 = 1.617720 pixels
[Sat Oct 29 05:26:44 2011] 40.866600 total counts/ 17.440300 bgd. counts: snr = 5.609533
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.617720 pixels
  Position = (305.1, 263.9) = 16 52 59.92 2 14 36.4
  Extent = 3.9 (1.5-5.8)", rotation angle = 0
  Source counts = 23.4 +/- 6.4
  Background counts = 17.4
  Rate = 0.0006 +/- 0.0002
[Sat Oct 29 05:26:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:26:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:26:44 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:26:44 2011] Source does appear to be extended
[Sat Oct 29 05:26:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:27:52 2011] Not overwriting source region fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.reg
[Sat Oct 29 05:27:52 2011] Extracting stamp from image fullrun_ccd6_acisf01590_pi14-548_cl_sm2.00.img.gz, (127, 86) - (483, 442)
[Sat Oct 29 05:27:52 2011] Writing fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23.gif
[Sat Oct 29 05:28:27 2011] ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.evt and ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Oct 29 05:28:27 2011] Size of ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.evt.gz[events] = 31 counts
[Sat Oct 29 05:28:27 2011] Mean chipx,y = (283.87, 20.29)
[Sat Oct 29 05:28:27 2011] Mean tdetx,y = (3158.87, 1722.29)
[Sat Oct 29 05:28:27 2011] chipx,y range = (255.00-311.00, 5.00-46.00)
[Sat Oct 29 05:28:27 2011] Size of ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 65 counts
[Sat Oct 29 05:28:27 2011] ../../acisf01590/products/images/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.img and ../../acisf01590/products/images/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Oct 29 05:28:27 2011] ../../acisf01590/products/spectra/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.pi and ../../acisf01590/products/spectra/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Oct 29 05:28:27 2011] Not generating rmf since there are only 23 counts
[Sat Oct 29 05:28:30 2011] ../../acisf01590/products/lightcurves/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.lc and ../../acisf01590/products/lightcurves/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Oct 29 05:29:10 2011] 174.134
[Sat Oct 29 05:29:52 2011] Updating aperture counts using extracted products
[Sat Oct 29 05:29:52 2011] Error reading totcts from fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23_src.pi.gz
[Sat Oct 29 05:29:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 05:29:52 2011] Using photon index=1.80, rate=0.000639, arf fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src23.arf
[Sat Oct 29 05:29:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 05:29:52 2011] Updating source flux to 7.9e-15
[Sat Oct 29 05:30:03 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting