[Sat Oct 29 05:24:59 2011] Detection parameters:
  Position = (157.5, 920.6) = 16 53 4.75 2 19 59.8
  Extent = 0.7" x 0.5", rotation angle = 128 degrees
  Source counts = 28.4 +/- 5.5
  Background counts = 1.6
  Rate = 0.0008 +/- 0.0001

[Sat Oct 29 05:25:01 2011] Off-axis axis estimate = 4.00'
[Sat Oct 29 05:25:57 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:25:57 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Oct 29 05:25:57 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.305
[Sat Oct 29 05:25:57 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.83"
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src9.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src9.csv
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src9_1.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src9.csv
[Sat Oct 29 05:25:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Oct 29 05:25:58 2011] Fit fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Oct 29 05:26:09 2011] Spatial fit model total counts = 30.581700, observed total counts = 31.000000
[Sat Oct 29 05:26:09 2011] Offset between fit and detection position for source 2 = 1.129046 pixels
[Sat Oct 29 05:26:09 2011] 31.194000 total counts/ 0.000000 bgd. counts: snr = 168576570289708.093750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.129046 pixels
  Position = (158.6, 920.5) = 16 53 4.73 2 19 59.5
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 31.2 +/- 5.6
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sat Oct 29 05:26:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:26:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:26:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:26:09 2011] Source does appear to be extended
[Sat Oct 29 05:26:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:26:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:26:31 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Sat Oct 29 05:26:31 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923
[Sat Oct 29 05:26:31 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.03"
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src9.ximg exists
[Sat Oct 29 05:26:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src9.csv
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Oct 29 05:26:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src9.csv
[Sat Oct 29 05:26:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Oct 29 05:26:32 2011] Fit fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Oct 29 05:26:44 2011] Spatial fit model total counts = 29.782300, observed total counts = 31.000000
[Sat Oct 29 05:26:44 2011] Offset between fit and detection position for source 2 = 0.113646 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.113646 pixels
  Position = (158.6, 920.7) = 16 53 4.73 2 19 59.6
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 30.3 +/- 5.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Sat Oct 29 05:26:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:26:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:26:44 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:26:44 2011] Source does appear to be extended
[Sat Oct 29 05:26:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:27:52 2011] Not overwriting source region fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 05:27:52 2011] Extracting stamp from image fullrun_ccd6_acisf01590_pi14-548_cl_sm2.00.img.gz, (111, 873) - (206, 968)
[Sat Oct 29 05:27:52 2011] Writing fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 05:28:18 2011] ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.evt and ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 05:28:18 2011] Size of ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.evt.gz[events] = 31 counts
[Sat Oct 29 05:28:18 2011] Mean chipx,y = (946.58, 148.16)
[Sat Oct 29 05:28:18 2011] Mean tdetx,y = (3821.58, 1850.16)
[Sat Oct 29 05:28:18 2011] chipx,y range = (925.00-961.00, 129.00-161.00)
[Sat Oct 29 05:28:18 2011] Size of ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 33 counts
[Sat Oct 29 05:28:18 2011] ../../acisf01590/products/images/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.img and ../../acisf01590/products/images/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 05:28:18 2011] ../../acisf01590/products/spectra/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.pi and ../../acisf01590/products/spectra/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 29 05:28:18 2011] Not generating rmf since there are only 30 counts
[Sat Oct 29 05:28:23 2011] ../../acisf01590/products/lightcurves/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.lc and ../../acisf01590/products/lightcurves/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 05:29:10 2011] 205.21
[Sat Oct 29 05:29:52 2011] Updating aperture counts using extracted products
[Sat Oct 29 05:29:52 2011] Error reading totcts from fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 05:29:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 05:29:52 2011] Using photon index=1.80, rate=0.000827, arf fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 05:29:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 05:29:52 2011] Updating source flux to 8.5e-15
[Sat Oct 29 05:30:03 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting