[Sat Oct 29 05:25:00 2011] Detection parameters:
  Position = (745.6, 1205.3) = 16 52 45.44 2 22 19.9
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0003 +/- 0.0001

[Sat Oct 29 05:25:01 2011] Off-axis axis estimate = 3.28'
[Sat Oct 29 05:25:57 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:25:57 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sat Oct 29 05:25:57 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.695
[Sat Oct 29 05:25:57 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.64"
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src19.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src19.csv
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src19_1.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src19.csv
[Sat Oct 29 05:25:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01590_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src19.csv
[Sat Oct 29 05:25:58 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Oct 29 05:25:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src19.csv
[Sat Oct 29 05:25:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01590_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:26:09 2011] Spatial fit model total counts = 12.063500, observed total counts = 14.000000
[Sat Oct 29 05:26:09 2011] Offset between fit and detection position for source 10 = 0.972241 pixels
[Sat Oct 29 05:26:09 2011] 12.644458 total counts/ 0.060258 bgd. counts: snr = 51.264723
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.972241 pixels
  Position = (746.4, 1205.9) = 16 52 45.43 2 22 19.9
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 12.6 +/- 3.6
  Background counts = 0.1
  Rate = 0.0003 +/- 0.0001
[Sat Oct 29 05:26:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:26:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:26:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:26:09 2011] Source does appear to be extended
[Sat Oct 29 05:26:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:26:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:26:31 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sat Oct 29 05:26:31 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.998
[Sat Oct 29 05:26:31 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.74"
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src18.ximg exists
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Oct 29 05:26:32 2011] Fit fullrun_ccd6_acisf01590_pi14-548_cl_pass1_src18 appears to have run properly
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Oct 29 05:26:32 2011] fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Oct 29 05:26:32 2011] Fit fullrun_ccd6_acisf01590_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Oct 29 05:26:44 2011] Spatial fit model total counts = 13.103800, observed total counts = 14.000000
[Sat Oct 29 05:26:44 2011] Offset between fit and detection position for source 10 = 0.307035 pixels
[Sat Oct 29 05:26:44 2011] 13.352307 total counts/ 0.284107 bgd. counts: snr = 24.517422
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.307035 pixels
  Position = (746.7, 1205.9) = 16 52 45.42 2 22 19.9
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 13.1 +/- 3.7
  Background counts = 0.3
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 05:26:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:26:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:26:44 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:26:44 2011] Source does appear to be extended
[Sat Oct 29 05:26:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:27:52 2011] Not overwriting source region fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.reg
[Sat Oct 29 05:27:52 2011] Extracting stamp from image fullrun_ccd6_acisf01590_pi14-548_cl_sm2.00.img.gz, (709, 1169) - (784, 1243)
[Sat Oct 29 05:27:52 2011] Writing fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10.gif
[Sat Oct 29 05:28:49 2011] ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.evt and ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct 29 05:28:49 2011] Size of ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.evt.gz[events] = 13 counts
[Sat Oct 29 05:28:49 2011] Mean chipx,y = (972.00, 799.00)
[Sat Oct 29 05:28:49 2011] Mean tdetx,y = (3847.00, 2501.00)
[Sat Oct 29 05:28:49 2011] chipx,y range = (954.00-988.00, 787.00-813.00)
[Sat Oct 29 05:28:49 2011] Size of ../../acisf01590/products/events/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 11 counts
[Sat Oct 29 05:28:49 2011] ../../acisf01590/products/images/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.img and ../../acisf01590/products/images/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct 29 05:28:49 2011] ../../acisf01590/products/spectra/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.pi and ../../acisf01590/products/spectra/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Oct 29 05:28:49 2011] Not generating rmf since there are only 13 counts
[Sat Oct 29 05:28:52 2011] ../../acisf01590/products/lightcurves/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.lc and ../../acisf01590/products/lightcurves/fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct 29 05:29:10 2011] 207.87
[Sat Oct 29 05:29:52 2011] Updating aperture counts using extracted products
[Sat Oct 29 05:29:52 2011] Error reading totcts from fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct 29 05:29:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 05:29:52 2011] Using photon index=1.80, rate=0.000356, arf fullrun_ccd6_acisf01590_pi14-548_pass1_cl_src10.arf
[Sat Oct 29 05:29:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 05:29:52 2011] Updating source flux to 3.6e-15
[Sat Oct 29 05:30:03 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting