[Sun Apr 29 03:35:27 2012] Detection parameters:
  Position = (426.8, 898.8) = 0 42 38.58 41 16 3.8
  Extent = 0.8" x 0.6", rotation angle = 179 degrees
  Source counts = 1731.2 +/- 41.9
  Background counts = 23.8
  Rate = 0.4 +/- 0.009

[Sun Apr 29 03:35:30 2012] Off-axis axis estimate = 4.29'
[Sun Apr 29 03:37:53 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 03:37:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 03:37:53 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Sun Apr 29 03:37:53 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.109
[Sun Apr 29 03:37:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.92"
[Sun Apr 29 04:53:59 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass0_src1.ximg exists
[Sun Apr 29 04:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01585_pi14-548_cl_pass0_src1.csv
[Sun Apr 29 04:53:59 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Apr 29 04:53:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01585_pi14-548_cl_pass0_src1.csv
[Sun Apr 29 04:53:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01585_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01585_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 04:54:00 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Apr 29 04:54:00 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Apr 29 04:54:00 2012] Fit fullrun_ccd0_acisf01585_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Apr 29 05:47:29 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.398500 pixels away
[Sun Apr 29 05:47:29 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 05:47:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 05:47:29 2012] Assessing source extent using major
[Sun Apr 29 05:47:29 2012] Source does appear to be extended
[Sun Apr 29 05:47:29 2012] Computing asymmetry using major and minor axis, asym = 1.51
[Sun Apr 29 05:47:29 2012] Source is asymmetric
[Sun Apr 29 05:47:54 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 05:47:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 05:47:54 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Sun Apr 29 05:47:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.109
[Sun Apr 29 05:47:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.92"
[Sun Apr 29 07:02:09 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass1_src1.ximg exists
[Sun Apr 29 07:02:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01585_pi14-548_cl_pass1_src1.csv
[Sun Apr 29 07:02:09 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Apr 29 07:02:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01585_pi14-548_cl_pass1_src1.csv
[Sun Apr 29 07:02:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01585_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01585_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 07:02:09 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Apr 29 07:02:09 2012] fullrun_ccd0_acisf01585_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Apr 29 07:02:09 2012] Fit fullrun_ccd0_acisf01585_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Apr 29 07:55:35 2012] Spatial fit model total counts = 1744.700000, observed total counts = 1739.000000
[Sun Apr 29 07:55:35 2012] Offset between fit and detection position for source 1 = 0.726559 pixels
[Sun Apr 29 07:55:35 2012] 1746.819200 total counts/ 53.239200 bgd. counts: snr = 232.107918
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.726559 pixels
  Position = (427.4, 899.3) = 0 42 38.58 41 16 3.8
  Extent = 1.0 (1.0-1.0)", rotation angle = 0
  Source counts = 1693.6 +/- 41.8
  Background counts = 53.2
  Rate = 0.3 +/- 0.009
[Sun Apr 29 07:55:36 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 07:55:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 07:55:36 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 07:55:36 2012] Source does appear to be extended
[Sun Apr 29 07:55:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 07:56:01 2012] Writing source region out to fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1_src.reg
[Sun Apr 29 07:56:01 2012] Extracting stamp from image fullrun_ccd0_acisf01585_pi14-548_cl_sm2.00.img.gz, (382, 854) - (473, 944)
[Sun Apr 29 07:56:01 2012] Writing fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1.gif
[Sun Apr 29 07:56:07 2012] Size of ../../acisf01585/products/events/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1746 counts
[Sun Apr 29 07:56:07 2012] Mean chipx,y = (615.82, 874.90)
[Sun Apr 29 07:56:07 2012] Mean tdetx,y = (3935.90, 4516.18)
[Sun Apr 29 07:56:07 2012] chipx,y range = (591.00-638.00, 852.00-897.00)
[Sun Apr 29 07:56:07 2012] Size of ../../acisf01585/products/events/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 43 counts
[Sun Apr 29 07:56:10 2012] rmf not found, will run specextract
[Sun Apr 29 07:56:10 2012] arf not found, will run specextract
[Sun Apr 29 07:56:42 2012] ../../acisf01585/products/spectra/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1.warf not found
[Sun Apr 29 07:56:42 2012] ../../acisf01585/products/spectra/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1.wrmf not found
[Sun Apr 29 07:56:42 2012] Removal of ../../acisf01585/products/spectra/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1.soff failed
[Sun Apr 29 08:24:54 2012] Keeping rmf generated by specextract
[Sun Apr 29 08:24:54 2012] 189.304
[Sun Apr 29 08:50:34 2012] Updating aperture counts using extracted products
[Sun Apr 29 08:50:34 2012] Error reading totcts from fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Apr 29 08:50:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr 29 08:50:34 2012] Using photon index=1.80, rate=0.347, arf fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1.arf
[Sun Apr 29 08:50:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Apr 29 08:50:34 2012] Updating source flux to 3.9e-12
[Sun Apr 29 08:51:30 2012] Reading fit data from acisf01585/analysis//spectral/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1_pl.csv
[Sun Apr 29 08:51:30 2012] Spectral fit parameter nH value = 1.69472e+21
[Sun Apr 29 08:51:30 2012] Spectral fit parameter PhoIndex value = 1.50224
[Sun Apr 29 08:51:30 2012] Failed to get F(0.3-8.0) from acisf01585/analysis//spectral/fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Apr 29 08:51:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr 29 08:51:30 2012] Using Nh = 1.7e+21, photon index=1.50, rate=0.347, arf fullrun_ccd0_acisf01585_pi14-548_pass1_cl_src1.arf
[Sun Apr 29 08:51:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Apr 29 08:51:30 2012] Updating source flux to 4.5e-12