[Sun Oct 23 04:59:50 2011] Detection parameters:
  Position = (538.3, 800.1) = 12 30 31.05 41 38 37.5
  Extent = 0.7" x 0.5", rotation angle = 95 degrees
  Source counts = 15.9 +/- 4.4
  Background counts = 3.1
  Rate = 0.0008 +/- 0.0002

[Sun Oct 23 04:59:51 2011] Off-axis axis estimate = 0.84'
[Sun Oct 23 05:00:29 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 05:00:29 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 23 05:00:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Sun Oct 23 05:00:29 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.38"
[Sun Oct 23 05:00:30 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass0_src23.ximg exists
[Sun Oct 23 05:00:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01579_pi14-548_cl_pass0_src23.csv
[Sun Oct 23 05:00:30 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass0_src23_1.ximg exists
[Sun Oct 23 05:00:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01579_pi14-548_cl_pass0_src23.csv
[Sun Oct 23 05:00:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01579_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01579_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 05:00:30 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sun Oct 23 05:00:30 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Oct 23 05:00:30 2011] Fit fullrun_ccd7_acisf01579_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Oct 23 05:00:38 2011] Spatial fit model total counts = 29.940900, observed total counts = 30.000000
[Sun Oct 23 05:00:38 2011] Offset between fit and detection position for source 26 = 0.556733 pixels
[Sun Oct 23 05:00:38 2011] 29.529000 total counts/ 18.893100 bgd. counts: snr = 2.446936
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.556733 pixels
  Position = (538.5, 800.6) = 12 30 31.07 41 38 37.5
  Extent = 0.2 (0.1-0.2)", rotation angle = 0
  Source counts = 10.6 +/- 5.4
  Background counts = 18.9
  Rate = 0.0005 +/- 0.0003
[Sun Oct 23 05:00:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 05:00:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 05:00:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 05:00:38 2011] Source does appear to be extended
[Sun Oct 23 05:00:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 05:00:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 05:00:57 2011] Initial guess for spatial extent in simple fitting = 0.18"
[Sun Oct 23 05:00:57 2011] source mask rpix=0.4, npix_max = 3, mask sum = 2, frac = 0.664
[Sun Oct 23 05:00:57 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.18"
[Sun Oct 23 05:00:58 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass1_src23.ximg exists
[Sun Oct 23 05:00:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01579_pi14-548_cl_pass1_src23.csv
[Sun Oct 23 05:00:58 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass1_src23_1.ximg exists
[Sun Oct 23 05:00:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01579_pi14-548_cl_pass1_src23.csv
[Sun Oct 23 05:00:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01579_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01579_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 05:00:58 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sun Oct 23 05:00:58 2011] fullrun_ccd7_acisf01579_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Oct 23 05:00:58 2011] Fit fullrun_ccd7_acisf01579_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Oct 23 05:01:06 2011] Source 26 is offset by -0.834953 and 0.126541 pixels which is larger than
2 X fitted extent = 0.224036 x 0.224036, not incorporating fit results
[Sun Oct 23 05:01:06 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 05:01:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 05:01:06 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 05:01:06 2011] Source does appear to be extended
[Sun Oct 23 05:01:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 05:02:02 2011] Not overwriting source region fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.reg
[Sun Oct 23 05:02:02 2011] Extracting stamp from image fullrun_ccd7_acisf01579_pi14-548_cl_sm2.00.img.gz, (530, 792) - (547, 809)
[Sun Oct 23 05:02:02 2011] Writing fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26.gif
[Sun Oct 23 05:03:11 2011] ../../acisf01579/products/events/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.evt and ../../acisf01579/products/events/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun Oct 23 05:03:11 2011] Size of ../../acisf01579/products/events/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.evt.gz[events] = 12 counts
[Sun Oct 23 05:03:11 2011] Mean chipx,y = (314.58, 546.92)
[Sun Oct 23 05:03:11 2011] Mean tdetx,y = (4231.58, 2248.92)
[Sun Oct 23 05:03:11 2011] chipx,y range = (295.00-328.00, 525.00-561.00)
[Sun Oct 23 05:03:11 2011] Size of ../../acisf01579/products/events/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 8 counts
[Sun Oct 23 05:03:11 2011] ../../acisf01579/products/images/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.img and ../../acisf01579/products/images/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun Oct 23 05:03:11 2011] ../../acisf01579/products/spectra/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.pi and ../../acisf01579/products/spectra/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun Oct 23 05:03:11 2011] Not generating rmf since there are only 10 counts
[Sun Oct 23 05:03:14 2011] ../../acisf01579/products/lightcurves/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.lc and ../../acisf01579/products/lightcurves/fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun Oct 23 05:04:12 2011] 247.02
[Sun Oct 23 05:04:14 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:04:14 2011] Error reading totcts from fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26_src.pi.gz
[Sun Oct 23 05:04:15 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:04:15 2011] Using photon index=1.80, rate=0.000545, arf fullrun_ccd7_acisf01579_pi14-548_pass1_cl_src26.arf
[Sun Oct 23 05:04:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:04:15 2011] Updating source flux to 3.1e-15
[Sun Oct 23 05:04:23 2011] Flag b found in src. 26 procflags, skipping spectral fitting
[Sun Oct 23 05:04:23 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting