[Mon Jan 23 05:05:28 2012] Detection parameters:
  Position = (477.6, 1187.7) = 0 43 21.07 41 17 50.3
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 23.9 +/- 4.9
  Background counts = 0.1
  Rate = 0.005 +/- 0.001

[Mon Jan 23 05:05:28 2012] Off-axis axis estimate = 2.98'
[Mon Jan 23 06:38:19 2012] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:38:19 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Mon Jan 23 06:38:19 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.807
[Mon Jan 23 06:38:19 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 0.58"
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src16.ximg exists
[Mon Jan 23 07:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src16.csv
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src16_1.ximg exists
[Mon Jan 23 07:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src16.csv
[Mon Jan 23 07:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jan 23 07:07:02 2012] Fit fullrun_ccd3_acisf01577_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Jan 23 07:28:36 2012] Spatial fit model total counts = 22.616000, observed total counts = 24.000000
[Mon Jan 23 07:28:36 2012] Offset between fit and detection position for source 13 = 0.671220 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.671220 pixels
  Position = (477.9, 1188.3) = 0 43 21.08 41 17 50.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.7 +/- 4.8
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Mon Jan 23 07:28:36 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 07:28:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 07:28:36 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 07:28:36 2012] Source does appear to be extended
[Mon Jan 23 07:28:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 08:56:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 08:56:53 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Mon Jan 23 08:56:53 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.101
[Mon Jan 23 08:56:53 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 0.46"
[Mon Jan 23 09:19:32 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src16.ximg exists
[Mon Jan 23 09:19:32 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src16.csv
[Mon Jan 23 09:19:32 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src16_1.ximg exists
[Mon Jan 23 09:19:32 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src16.csv
[Mon Jan 23 09:19:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 09:19:32 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Mon Jan 23 09:19:32 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jan 23 09:19:32 2012] Fit fullrun_ccd3_acisf01577_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Jan 23 09:41:18 2012] Spatial fit model total counts = 22.679600, observed total counts = 24.000000
[Mon Jan 23 09:41:18 2012] Offset between fit and detection position for source 13 = 0.020769 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.020769 pixels
  Position = (477.9, 1188.3) = 0 43 21.08 41 17 50.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.8 +/- 4.8
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Mon Jan 23 09:41:18 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:41:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:41:18 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 09:41:18 2012] Source does appear to be extended
[Mon Jan 23 09:41:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:51:01 2012] Writing source region out to fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src13_src.reg
[Mon Jan 23 09:51:01 2012] Extracting stamp from image fullrun_ccd3_acisf01577_pi14-548_cl_sm2.00.img.gz, (457, 1167) - (499, 1209)
[Mon Jan 23 09:51:01 2012] Writing fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src13.gif
[Mon Jan 23 09:53:46 2012] Size of ../../acisf01577/products/events/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src13_src.evt.gz[events] = 23 counts
[Mon Jan 23 09:53:46 2012] Mean chipx,y = (1010.13, 644.83)
[Mon Jan 23 09:53:46 2012] Mean tdetx,y = (4487.17, 4071.13)
[Mon Jan 23 09:53:46 2012] chipx,y range = (1003.00-1020.00, 627.00-658.00)
[Mon Jan 23 09:53:46 2012] ../../acisf01577/products/events/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src13_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Mon Jan 23 09:54:42 2012] No arf file found
[Mon Jan 23 09:55:40 2012] Updating aperture counts using extracted products
[Mon Jan 23 09:55:40 2012] Error reading totcts from fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src13_src.pi
[Mon Jan 23 09:55:40 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 09:55:46 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 09:55:47 2012] acisf01577/analysis//spectral/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete