[Mon Jan 23 05:05:27 2012] Detection parameters:
  Position = (1131.6, 922.5) = 0 42 52.52 41 15 39.8
  Extent = 0.8" x 0.5", rotation angle = 24 degrees
  Source counts = 83.6 +/- 9.2
  Background counts = 1.4
  Rate = 0.02 +/- 0.002

[Mon Jan 23 05:05:28 2012] Off-axis axis estimate = 4.55'
[Mon Jan 23 06:38:19 2012] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:38:19 2012] Initial guess for spatial extent in simple fitting = 1.01"
[Mon Jan 23 06:38:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Mon Jan 23 06:38:19 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.01"
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src10.ximg exists
[Mon Jan 23 07:07:02 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src10.csv
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Jan 23 07:07:02 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src10.csv
[Mon Jan 23 07:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01577_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Jan 23 07:07:02 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jan 23 07:07:02 2012] Fit fullrun_ccd3_acisf01577_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jan 23 07:28:36 2012] Spatial fit model total counts = 85.678700, observed total counts = 86.000000
[Mon Jan 23 07:28:36 2012] Offset between fit and detection position for source 10 = 0.809471 pixels
[Mon Jan 23 07:28:36 2012] 85.321770 total counts/ 3.218670 bgd. counts: snr = 45.763721
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.809471 pixels
  Position = (1132.2, 923.1) = 0 42 52.52 41 15 39.8
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 82.1 +/- 9.2
  Background counts = 3.2
  Rate = 0.02 +/- 0.002
[Mon Jan 23 07:28:36 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 07:28:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 07:28:36 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 07:28:36 2012] Source does appear to be extended
[Mon Jan 23 07:28:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 08:56:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 08:56:53 2012] Initial guess for spatial extent in simple fitting = 0.87"
[Mon Jan 23 08:56:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Mon Jan 23 08:56:53 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.87"
[Mon Jan 23 09:19:31 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src10.ximg exists
[Mon Jan 23 09:19:31 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src10.csv
[Mon Jan 23 09:19:31 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Jan 23 09:19:31 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src10.csv
[Mon Jan 23 09:19:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01577_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 09:19:32 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Jan 23 09:19:32 2012] fullrun_ccd3_acisf01577_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jan 23 09:19:32 2012] Fit fullrun_ccd3_acisf01577_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jan 23 09:41:18 2012] Spatial fit model total counts = 85.468200, observed total counts = 86.000000
[Mon Jan 23 09:41:18 2012] Offset between fit and detection position for source 10 = 0.065058 pixels
[Mon Jan 23 09:41:18 2012] 84.836820 total counts/ 3.450820 bgd. counts: snr = 43.811543
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.065058 pixels
  Position = (1132.2, 923.1) = 0 42 52.52 41 15 39.9
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 81.4 +/- 9.2
  Background counts = 3.5
  Rate = 0.02 +/- 0.002
[Mon Jan 23 09:41:18 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:41:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:41:18 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 09:41:18 2012] Source does appear to be extended
[Mon Jan 23 09:41:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:51:01 2012] Writing source region out to fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_src.reg
[Mon Jan 23 09:51:01 2012] Extracting stamp from image fullrun_ccd3_acisf01577_pi14-548_cl_sm2.00.img.gz, (1093, 884) - (1171, 962)
[Mon Jan 23 09:51:01 2012] Writing fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10.gif
[Mon Jan 23 09:52:42 2012] Size of ../../acisf01577/products/events/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_src.evt.gz[events] = 85 counts
[Mon Jan 23 09:52:42 2012] Mean chipx,y = (414.15, 1005.05)
[Mon Jan 23 09:52:42 2012] Mean tdetx,y = (4126.95, 3475.15)
[Mon Jan 23 09:52:42 2012] chipx,y range = (394.00-433.00, 986.00-1023.00)
[Mon Jan 23 09:52:42 2012] Size of ../../acisf01577/products/events/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 10 counts
[Mon Jan 23 09:52:43 2012] Not generating rmf since there are only 81 counts
[Mon Jan 23 09:52:43 2012] arf not found, will run specextract
[Mon Jan 23 09:52:45 2012] ../../acisf01577/products/spectra/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_bkg.pi not found
[Mon Jan 23 09:52:45 2012] ../../acisf01577/products/spectra/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10.warf not found
[Mon Jan 23 09:52:45 2012] ../../acisf01577/products/spectra/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10.wrmf not found
[Mon Jan 23 09:52:45 2012] Removal of ../../acisf01577/products/spectra/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10.soff failed
[Mon Jan 23 09:52:45 2012] Failed to rename ../../acisf01577/products/spectra/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_grp.pi to ../../acisf01577/products/spectra/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_src.pi
[Mon Jan 23 09:54:42 2012] No arf file found
[Mon Jan 23 09:55:40 2012] Updating aperture counts using extracted products
[Mon Jan 23 09:55:40 2012] Error reading totcts from fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_src.pi
[Mon Jan 23 09:55:40 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 09:55:46 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 09:55:47 2012] acisf01577/analysis//spectral/fullrun_ccd3_acisf01577_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete