[Mon Jan 23 05:05:25 2012] Detection parameters:
  Position = (1157.0, 900.2) = 0 42 15.53 41 20 30.3
  Extent = 2.8" x 1.7", rotation angle = 38 degrees
  Source counts = 23.5 +/- 5.1
  Background counts = 2.5
  Rate = 0.005 +/- 0.001

[Mon Jan 23 05:05:25 2012] Off-axis axis estimate = 9.78'
[Mon Jan 23 05:27:51 2012] Using EEF radius (= 4.23 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 05:27:51 2012] Initial guess for spatial extent in simple fitting = 4.23"
[Mon Jan 23 05:27:51 2012] source mask rpix=8.6, npix_max = 331, mask sum = 324, frac = 0.977
[Mon Jan 23 05:27:51 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 4.23"
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src29.ximg exists
[Mon Jan 23 06:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src29.csv
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Jan 23 06:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src29.csv
[Mon Jan 23 06:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jan 23 06:38:19 2012] Fit fullrun_ccd2_acisf01577_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Jan 23 07:28:33 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 39.960391 pixels away
[Mon Jan 23 07:28:33 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 07:28:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 07:28:33 2012] Assessing source extent using major
[Mon Jan 23 07:28:33 2012] Source does appear to be extended
[Mon Jan 23 07:28:33 2012] Computing asymmetry using major and minor axis, asym = 1.63
[Mon Jan 23 07:28:33 2012] Source is asymmetric
[Mon Jan 23 07:49:03 2012] Using EEF radius (= 4.23 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:49:03 2012] Initial guess for spatial extent in simple fitting = 4.23"
[Mon Jan 23 07:49:03 2012] source mask rpix=8.6, npix_max = 331, mask sum = 324, frac = 0.977
[Mon Jan 23 07:49:03 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 4.23"
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src29.ximg exists
[Mon Jan 23 08:56:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src29.csv
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src29_1.ximg exists
[Mon Jan 23 08:56:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src29.csv
[Mon Jan 23 08:56:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jan 23 08:56:53 2012] Fit fullrun_ccd2_acisf01577_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Jan 23 09:41:15 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 285.697146 pixels away
[Mon Jan 23 09:41:15 2012] Spatial fit model total counts = 28.794500, observed total counts = 29.000000
[Mon Jan 23 09:41:15 2012] Offset between fit and detection position for source 42 = 3.389826 pixels
[Mon Jan 23 09:41:15 2012] 28.604360 total counts/ 8.547060 bgd. counts: snr = 6.860632
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 3.389826 pixels
  Position = (1159.7, 902.3) = 0 42 15.43 41 20 31.0
  Extent = 2.1 (1.4-3.8)", rotation angle = 0
  Source counts = 20.1 +/- 5.3
  Background counts = 8.5
  Rate = 0.004 +/- 0.001
[Mon Jan 23 09:41:15 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:41:15 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 09:41:15 2012] Source does appear to be extended
[Mon Jan 23 09:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:43:39 2012] Writing source region out to fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_src.reg
[Mon Jan 23 09:43:39 2012] Extracting stamp from image fullrun_ccd2_acisf01577_pi14-548_cl_sm2.00.img.gz, (1064, 807) - (1255, 998)
[Mon Jan 23 09:43:39 2012] Writing fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42.gif
[Mon Jan 23 09:48:34 2012] Size of ../../acisf01577/products/events/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_src.evt.gz[events] = 25 counts
[Mon Jan 23 09:48:34 2012] Mean chipx,y = (648.16, 28.92)
[Mon Jan 23 09:48:34 2012] Mean tdetx,y = (3089.92, 3437.84)
[Mon Jan 23 09:48:34 2012] chipx,y range = (626.00-681.00, 13.00-48.00)
[Mon Jan 23 09:48:34 2012] Size of ../../acisf01577/products/events/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 12 counts
[Mon Jan 23 09:48:36 2012] Not generating rmf since there are only 20 counts
[Mon Jan 23 09:48:36 2012] arf not found, will run specextract
[Mon Jan 23 09:48:37 2012] ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_bkg.pi not found
[Mon Jan 23 09:48:37 2012] ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42.warf not found
[Mon Jan 23 09:48:37 2012] ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42.wrmf not found
[Mon Jan 23 09:48:37 2012] Removal of ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42.soff failed
[Mon Jan 23 09:48:37 2012] Failed to rename ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_grp.pi to ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_src.pi
[Mon Jan 23 09:51:00 2012] No arf file found
[Mon Jan 23 09:55:39 2012] Updating aperture counts using extracted products
[Mon Jan 23 09:55:39 2012] Error reading totcts from fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_src.pi
[Mon Jan 23 09:55:39 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 09:55:45 2012] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 09:55:46 2012] acisf01577/analysis//spectral/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete