[Mon Jan 23 05:05:25 2012] Detection parameters:
  Position = (459.6, 388.6) = 0 42 46.02 41 16 19.1
  Extent = 1.0" x 0.7", rotation angle = 47 degrees
  Source counts = 14.8 +/- 4.4
  Background counts = 4.2
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 05:05:25 2012] Off-axis axis estimate = 4.96'
[Mon Jan 23 05:27:51 2012] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 05:27:51 2012] Initial guess for spatial extent in simple fitting = 1.17"
[Mon Jan 23 05:27:51 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.759
[Mon Jan 23 05:27:51 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 1.17"
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src36.ximg exists
[Mon Jan 23 06:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src36.csv
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src36_1.ximg exists
[Mon Jan 23 06:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src36.csv
[Mon Jan 23 06:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01577_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Mon Jan 23 06:38:19 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Mon Jan 23 06:38:19 2012] Fit fullrun_ccd2_acisf01577_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Mon Jan 23 07:28:33 2012] Spatial fit model total counts = 24.719100, observed total counts = 25.000000
[Mon Jan 23 07:28:33 2012] Offset between fit and detection position for source 31 = 1.235179 pixels
[Mon Jan 23 07:28:33 2012] 25.344200 total counts/ 10.007600 bgd. counts: snr = 4.848017
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.235179 pixels
  Position = (460.5, 389.3) = 0 42 46.00 41 16 19.2
  Extent = 1.0 (0.3-1.7)", rotation angle = 0
  Source counts = 15.3 +/- 5.0
  Background counts = 10.0
  Rate = 0.003 +/- 0.001
[Mon Jan 23 07:28:33 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 07:28:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 07:28:33 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 07:28:33 2012] Source does appear to be extended
[Mon Jan 23 07:28:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 07:49:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:49:03 2012] Initial guess for spatial extent in simple fitting = 1.04"
[Mon Jan 23 07:49:03 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.919
[Mon Jan 23 07:49:03 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 1.04"
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src36.ximg exists
[Mon Jan 23 08:56:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src36.csv
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src36_1.ximg exists
[Mon Jan 23 08:56:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src36.csv
[Mon Jan 23 08:56:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01577_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Mon Jan 23 08:56:53 2012] fullrun_ccd2_acisf01577_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Jan 23 08:56:53 2012] Fit fullrun_ccd2_acisf01577_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Jan 23 09:41:15 2012] Spatial fit model total counts = 23.978200, observed total counts = 24.000000
[Mon Jan 23 09:41:15 2012] Offset between fit and detection position for source 31 = 0.259241 pixels
[Mon Jan 23 09:41:15 2012] 24.165090 total counts/ 6.765990 bgd. counts: snr = 6.688999
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.259241 pixels
  Position = (460.6, 389.5) = 0 42 46.00 41 16 19.4
  Extent = 1.1 (0.3-1.8)", rotation angle = 0
  Source counts = 17.4 +/- 4.9
  Background counts = 6.8
  Rate = 0.004 +/- 0.001
[Mon Jan 23 09:41:15 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:41:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:41:15 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 09:41:15 2012] Source does appear to be extended
[Mon Jan 23 09:41:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:43:39 2012] Writing source region out to fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_src.reg
[Mon Jan 23 09:43:39 2012] Extracting stamp from image fullrun_ccd2_acisf01577_pi14-548_cl_sm2.00.img.gz, (411, 339) - (511, 440)
[Mon Jan 23 09:43:39 2012] Writing fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31.gif
[Mon Jan 23 09:49:42 2012] Size of ../../acisf01577/products/events/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_src.evt.gz[events] = 25 counts
[Mon Jan 23 09:49:42 2012] Mean chipx,y = (640.24, 894.68)
[Mon Jan 23 09:49:42 2012] Mean tdetx,y = (3955.68, 3445.76)
[Mon Jan 23 09:49:42 2012] chipx,y range = (621.00-653.00, 878.00-917.00)
[Mon Jan 23 09:49:42 2012] Size of ../../acisf01577/products/events/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 215 counts
[Mon Jan 23 09:49:43 2012] Not generating rmf since there are only 17 counts
[Mon Jan 23 09:49:43 2012] arf not found, will run specextract
[Mon Jan 23 09:49:45 2012] ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_bkg.pi not found
[Mon Jan 23 09:49:45 2012] ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31.warf not found
[Mon Jan 23 09:49:45 2012] ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31.wrmf not found
[Mon Jan 23 09:49:45 2012] Removal of ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31.soff failed
[Mon Jan 23 09:49:45 2012] Failed to rename ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_grp.pi to ../../acisf01577/products/spectra/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_src.pi
[Mon Jan 23 09:51:00 2012] No arf file found
[Mon Jan 23 09:55:39 2012] Updating aperture counts using extracted products
[Mon Jan 23 09:55:39 2012] Error reading totcts from fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_src.pi
[Mon Jan 23 09:55:39 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 09:55:45 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 09:55:46 2012] acisf01577/analysis//spectral/fullrun_ccd2_acisf01577_pi14-548_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete