[Fri Sep 30 04:42:16 2011] Detection parameters:
  Position = (825.2, 952.4) = 11 50 57.83 -28 44 1.2
  Extent = 0.9" x 0.6", rotation angle = 45 degrees
  Source counts = 401.7 +/- 20.3
  Background counts = 10.3
  Rate = 0.02 +/- 0.001

[Fri Sep 30 04:42:20 2011] Off-axis axis estimate = 4.81'
[Fri Sep 30 04:43:04 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:43:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 04:43:04 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Sep 30 04:43:04 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Fri Sep 30 04:43:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.11"
[Fri Sep 30 04:43:05 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 30 04:43:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01563_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 04:43:05 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 30 04:43:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01563_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 04:43:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01563_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01563_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:43:06 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 04:43:06 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 04:43:06 2011] Fit fullrun_ccd7_acisf01563_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 04:43:17 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.005790 pixels away
[Fri Sep 30 04:43:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:43:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:43:17 2011] Assessing source extent using major
[Fri Sep 30 04:43:17 2011] Source does appear to be extended
[Fri Sep 30 04:43:17 2011] Computing asymmetry using major and minor axis, asym = 1.55
[Fri Sep 30 04:43:17 2011] Source is asymmetric
[Fri Sep 30 04:43:36 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:43:36 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Sep 30 04:43:36 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Fri Sep 30 04:43:36 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.11"
[Fri Sep 30 04:43:36 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 30 04:43:36 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 30 04:43:36 2011] Fit fullrun_ccd7_acisf01563_pi14-548_cl_pass1_src2 appears to have run properly
[Fri Sep 30 04:43:37 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 04:43:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01563_pi14-548_cl_pass1_tfrozen_src2.csv
[Fri Sep 30 04:43:37 2011] fullrun_ccd7_acisf01563_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 04:43:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01563_pi14-548_cl_pass1_tfrozen_src2.csv
[Fri Sep 30 04:43:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01563_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01563_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:43:47 2011] Spatial fit model total counts = 370.504000, observed total counts = 388.000000
[Fri Sep 30 04:43:47 2011] Offset between fit and detection position for source 2 = 0.433285 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.433285 pixels
  Position = (825.4, 952.8) = 11 50 57.85 -28 44 1.3
  Extent = 1.7 (1.6-1.9)" x 1.0 (0.9-1.0)", rotation angle = 322 (315-326) degrees
  Source counts = 381.6 +/- 19.5
  Background counts = 0.0
  Rate = 0.02 +/- 0.001
[Fri Sep 30 04:43:47 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:43:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:43:47 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:43:47 2011] Source does appear to be extended
[Fri Sep 30 04:43:47 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.56
[Fri Sep 30 04:43:47 2011] Source is asymmetric
[Fri Sep 30 04:44:47 2011] Not overwriting source region fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 04:44:47 2011] Extracting stamp from image fullrun_ccd7_acisf01563_pi14-548_cl_sm2.00.img.gz, (746, 874) - (905, 1032)
[Fri Sep 30 04:44:47 2011] Writing fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 04:44:52 2011] ../../acisf01563/products/events/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.evt and ../../acisf01563/products/events/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 04:44:52 2011] Size of ../../acisf01563/products/events/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.evt.gz[events] = 358 counts
[Fri Sep 30 04:44:52 2011] Mean chipx,y = (743.58, 768.89)
[Fri Sep 30 04:44:52 2011] Mean tdetx,y = (4660.58, 2470.89)
[Fri Sep 30 04:44:52 2011] chipx,y range = (726.00-764.00, 747.00-793.00)
[Fri Sep 30 04:44:52 2011] Size of ../../acisf01563/products/events/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 42 counts
[Fri Sep 30 04:44:52 2011] ../../acisf01563/products/images/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.img and ../../acisf01563/products/images/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 04:44:52 2011] ../../acisf01563/products/spectra/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.pi and ../../acisf01563/products/spectra/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 04:44:55 2011] ../../acisf01563/products/lightcurves/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.lc and ../../acisf01563/products/lightcurves/fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 04:46:59 2011] Keeping rmf generated by specextract
[Fri Sep 30 04:46:59 2011] 221.204
[Fri Sep 30 04:47:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:47:02 2011] Error reading totcts from fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 04:47:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:47:02 2011] Using photon index=1.80, rate=0.0187, arf fullrun_ccd7_acisf01563_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 04:47:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:47:02 2011] Updating source flux to 1.3e-13