[Thu May 16 23:22:14 2013] Detection parameters:
  Position = (988.8, 454.5) = 6 33 51.74 17 48 42.0
  Extent = 0.5" x 0.5", rotation angle = 19 degrees
  Source counts = 20.3 +/- 4.6
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Thu May 16 23:22:15 2013] Off-axis axis estimate = 3.42'
[Fri May 17 00:09:27 2013] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri May 17 00:09:27 2013] Initial guess for spatial extent in simple fitting = 0.67"
[Fri May 17 00:09:27 2013] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Fri May 17 00:09:27 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.67"
[Fri May 17 00:22:37 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass0_src6.ximg exists
[Fri May 17 00:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15622_pi14-548_cl_pass0_src6.csv
[Fri May 17 00:22:37 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass0_src6_1.ximg exists
[Fri May 17 00:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15622_pi14-548_cl_pass0_src6.csv
[Fri May 17 00:22:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15622_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15622_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 00:22:37 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri May 17 00:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15622_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri May 17 00:22:37 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri May 17 00:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15622_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri May 17 00:22:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15622_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15622_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 00:32:37 2013] Spatial fit model total counts = 21.550700, observed total counts = 24.000000
[Fri May 17 00:32:37 2013] Offset between fit and detection position for source 3 = 0.740491 pixels
[Fri May 17 00:32:37 2013] 20.803247 total counts/ 0.044247 bgd. counts: snr = 98.688484
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.740491 pixels
  Position = (989.3, 455.0) = 6 33 51.74 17 48 42.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri May 17 00:32:37 2013] Vigneting correction estimate = 1.000000
[Fri May 17 00:32:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 00:32:37 2013] Assessing source extent using major axis lower bound
[Fri May 17 00:32:37 2013] Source does appear to be extended
[Fri May 17 00:32:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 01:12:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 01:12:38 2013] Initial guess for spatial extent in simple fitting = 0.57"
[Fri May 17 01:12:38 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.087
[Fri May 17 01:12:38 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.57"
[Fri May 17 01:25:02 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass1_src6.ximg exists
[Fri May 17 01:25:02 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass1_src6_1.ximg exists
[Fri May 17 01:25:02 2013] Fit fullrun_ccd3_acisf15622_pi14-548_cl_pass1_src6 appears to have run properly
[Fri May 17 01:25:02 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri May 17 01:25:02 2013] fullrun_ccd3_acisf15622_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 17 01:25:02 2013] Fit fullrun_ccd3_acisf15622_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri May 17 01:31:13 2013] Spatial fit model total counts = 21.600800, observed total counts = 23.000000
[Fri May 17 01:31:13 2013] Offset between fit and detection position for source 3 = 0.007710 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007710 pixels
  Position = (989.3, 455.0) = 6 33 51.74 17 48 42.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 21.0 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri May 17 01:31:13 2013] Vigneting correction estimate = 1.000000
[Fri May 17 01:31:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 01:31:13 2013] Assessing source extent using major axis lower bound
[Fri May 17 01:31:13 2013] Source does appear to be extended
[Fri May 17 01:31:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 01:51:14 2013] Writing source region out to fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3_src.reg
[Fri May 17 01:51:14 2013] Extracting stamp from image fullrun_ccd3_acisf15622_pi14-548_cl_sm2.00.img.gz, (963, 429) - (1016, 481)
[Fri May 17 01:51:14 2013] Writing fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3.gif
[Fri May 17 01:53:48 2013] Size of ../../acisf15622/products/events/fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3_src.evt.gz[events] = 21 counts
[Fri May 17 01:53:48 2013] Mean chipx,y = (951.14, 628.81)
[Fri May 17 01:53:48 2013] Mean tdetx,y = (4503.19, 4012.14)
[Fri May 17 01:53:48 2013] chipx,y range = (935.00-971.00, 608.00-644.00)
[Fri May 17 01:53:48 2013] Size of ../../acisf15622/products/events/fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 9 counts
[Fri May 17 01:53:50 2013] Not generating rmf since there are only 21 counts
[Fri May 17 01:53:50 2013] arf not found, will run specextract
[Fri May 17 01:54:14 2013] ../../acisf15622/products/spectra/fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3.warf not found
[Fri May 17 01:54:14 2013] ../../acisf15622/products/spectra/fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3.wrmf not found
[Fri May 17 01:54:14 2013] Removal of ../../acisf15622/products/spectra/fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3.soff failed
[Fri May 17 01:57:11 2013] Spectrum 3 has only 21 counts, deleting rmf
[Fri May 17 01:57:11 2013] 197.496
[Fri May 17 01:57:36 2013] Updating aperture counts using extracted products
[Fri May 17 01:57:36 2013] Total counts from fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3_src.pi.gz = 21.00
[Fri May 17 01:57:36 2013] Total counts from fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3_bgd.pi.gz = 9.00
[Fri May 17 01:57:36 2013] Got source and background scale factors 0.000001, 0.000012
[Fri May 17 01:57:36 2013] User source parameters:
  Position = (989.3, 455.0) = 6 33 51.74 17 48 42.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 20.2 +/- 5.7
  Background aperture counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Fri May 17 01:57:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 01:57:37 2013] Using photon index=1.80, rate=0.000447, arf fullrun_ccd3_acisf15622_pi14-548_pass1_cl_src3.arf
[Fri May 17 01:57:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 17 01:57:37 2013] Updating source flux to 5.4e-15
[Fri May 17 01:57:42 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting