[Fri Jun 21 12:21:50 2013] Detection parameters:
  Position = (355.2, 612.7) = 10 0 1.10 2 37 57.9
  Extent = 0.7" x 0.5", rotation angle = 46 degrees
  Source counts = 12.8 +/- 3.6
  Background counts = 0.2
  Rate = 0.0006 +/- 0.0002

[Fri Jun 21 12:21:50 2013] Off-axis axis estimate = 3.88'
[Fri Jun 21 12:49:40 2013] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 12:49:40 2013] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Jun 21 12:49:40 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Fri Jun 21 12:49:40 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.80"
[Fri Jun 21 12:58:18 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass0_src5.ximg exists
[Fri Jun 21 12:58:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15605_pi14-548_cl_pass0_src5.csv
[Fri Jun 21 12:58:18 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Jun 21 12:58:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15605_pi14-548_cl_pass0_src5.csv
[Fri Jun 21 12:58:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15605_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15605_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 12:58:18 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 21 12:58:18 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 21 12:58:18 2013] Fit fullrun_ccd3_acisf15605_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 21 12:58:24 2013] Spatial fit model total counts = 13.348000, observed total counts = 15.000000
[Fri Jun 21 12:58:24 2013] Offset between fit and detection position for source 5 = 0.687309 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.687309 pixels
  Position = (355.7, 613.2) = 10 0 1.10 2 37 57.9
  Extent = 0.9 (0.6-1.4)" x 0.3 (0.2-0.5)", rotation angle = 134 (118-149) degrees
  Source counts = 12.7 +/- 3.6
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Fri Jun 21 12:58:24 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 12:58:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 12:58:24 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 12:58:24 2013] Source does appear to be extended
[Fri Jun 21 12:58:24 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33
[Fri Jun 21 13:25:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 13:25:17 2013] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Jun 21 13:25:17 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.977
[Fri Jun 21 13:25:17 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.62"
[Fri Jun 21 13:34:17 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass1_src5.ximg exists
[Fri Jun 21 13:34:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15605_pi14-548_cl_pass1_src5.csv
[Fri Jun 21 13:34:17 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Jun 21 13:34:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15605_pi14-548_cl_pass1_src5.csv
[Fri Jun 21 13:34:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15605_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15605_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 13:34:17 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 21 13:34:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15605_pi14-548_cl_pass1_tfrozen_src5.csv
[Fri Jun 21 13:34:17 2013] fullrun_ccd3_acisf15605_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 21 13:34:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15605_pi14-548_cl_pass1_tfrozen_src5.csv
[Fri Jun 21 13:34:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15605_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15605_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 13:34:23 2013] Spatial fit model total counts = 12.816900, observed total counts = 14.000000
[Fri Jun 21 13:34:23 2013] Offset between fit and detection position for source 5 = 0.090425 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.090425 pixels
  Position = (355.8, 613.3) = 10 0 1.10 2 37 57.9
  Extent = 0.9 (0.6-1.4)" x 0.3 (0.2-0.5)", rotation angle = 312 (298-329) degrees
  Source counts = 12.8 +/- 3.6
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Fri Jun 21 13:34:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 13:34:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 13:34:23 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 13:34:23 2013] Source does appear to be extended
[Fri Jun 21 13:34:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Fri Jun 21 13:58:05 2013] Writing source region out to fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5_src.reg
[Fri Jun 21 13:58:05 2013] Extracting stamp from image fullrun_ccd3_acisf15605_pi14-548_cl_sm2.00.img.gz, (317, 574) - (395, 652)
[Fri Jun 21 13:58:05 2013] Writing fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5.gif
[Fri Jun 21 14:00:33 2013] Size of ../../acisf15605/products/events/fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5_src.evt.gz[events] = 12 counts
[Fri Jun 21 14:00:33 2013] Mean chipx,y = (797.67, 579.92)
[Fri Jun 21 14:00:33 2013] Mean tdetx,y = (4552.08, 3858.67)
[Fri Jun 21 14:00:33 2013] chipx,y range = (775.00-810.00, 566.00-596.00)
[Fri Jun 21 14:00:33 2013] Size of ../../acisf15605/products/events/fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 6 counts
[Fri Jun 21 14:00:35 2013] Not generating rmf since there are only 12 counts
[Fri Jun 21 14:00:35 2013] arf not found, will run specextract
[Fri Jun 21 14:00:59 2013] ../../acisf15605/products/spectra/fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5.warf not found
[Fri Jun 21 14:00:59 2013] ../../acisf15605/products/spectra/fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5.wrmf not found
[Fri Jun 21 14:00:59 2013] Removal of ../../acisf15605/products/spectra/fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5.soff failed
[Fri Jun 21 14:03:55 2013] Spectrum 5 has only 13 counts, deleting rmf
[Fri Jun 21 14:03:55 2013] 192.901
[Fri Jun 21 14:04:03 2013] Updating aperture counts using extracted products
[Fri Jun 21 14:04:03 2013] Total counts from fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5_src.pi.gz = 12.00
[Fri Jun 21 14:04:03 2013] Total counts from fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5_bgd.pi.gz = 6.00
[Fri Jun 21 14:04:03 2013] Got source and background scale factors 0.000001, 0.000027
[Fri Jun 21 14:04:03 2013] User source parameters:
  Position = (355.8, 613.3) = 10 0 1.10 2 37 57.9
  Extent = 0.9 (0.6-1.4)" x 0.3 (0.2-0.5)", rotation angle = 312 (298-329) degrees
  Source aperture counts = 11.8 +/- 4.6
  Background aperture counts = 0.2
  Rate = 0.0005 +/- 0.0002

[Fri Jun 21 14:04:04 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 14:04:04 2013] Using photon index=1.80, rate=0.000586, arf fullrun_ccd3_acisf15605_pi14-548_pass1_cl_src5.arf
[Fri Jun 21 14:04:04 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 21 14:04:04 2013] Updating source flux to 7.2e-15
[Fri Jun 21 14:04:10 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting