[Tue May  7 23:07:30 2013] Detection parameters:
  Position = (334.3, 896.1) = 10 0 30.42 2 37 35.2
  Extent = 0.5" x 0.5", rotation angle = 44 degrees
  Source counts = 41.6 +/- 6.5
  Background counts = 0.4
  Rate = 0.002 +/- 0.0003

[Tue May  7 23:07:31 2013] Off-axis axis estimate = 2.41'
[Tue May  7 23:28:55 2013] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Tue May  7 23:28:55 2013] Initial guess for spatial extent in simple fitting = 0.48"
[Tue May  7 23:28:55 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.035
[Tue May  7 23:28:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.48"
[Tue May  7 23:41:14 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass0_src3.ximg exists
[Tue May  7 23:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15604_pi14-548_cl_pass0_src3.csv
[Tue May  7 23:41:14 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass0_src3_1.ximg exists
[Tue May  7 23:41:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15604_pi14-548_cl_pass0_src3.csv
[Tue May  7 23:41:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15604_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15604_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 23:41:14 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue May  7 23:41:14 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May  7 23:41:14 2013] Fit fullrun_ccd3_acisf15604_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May  7 23:41:19 2013] Spatial fit model total counts = 39.329800, observed total counts = 44.000000
[Tue May  7 23:41:19 2013] Offset between fit and detection position for source 4 = 0.580690 pixels
[Tue May  7 23:41:19 2013] 40.756460 total counts/ 0.002760 bgd. counts: snr = 775.726395
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.580690 pixels
  Position = (334.7, 896.6) = 10 0 30.42 2 37 35.2
  Extent = 0.5 (0.5-0.7)" x 0.4 (0.3-0.5)", rotation angle = 113 (78-147) degrees
  Source counts = 40.8 +/- 6.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Tue May  7 23:41:19 2013] Vigneting correction estimate = 1.000000
[Tue May  7 23:41:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 23:41:19 2013] Assessing source extent using major axis lower bound
[Tue May  7 23:41:19 2013] Source does appear to be extended
[Tue May  7 23:41:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Wed May  8 00:01:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 00:01:52 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Wed May  8 00:01:52 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.072
[Wed May  8 00:01:52 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.47"
[Wed May  8 00:13:20 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass1_src3.ximg exists
[Wed May  8 00:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15604_pi14-548_cl_pass1_src3.csv
[Wed May  8 00:13:20 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass1_src3_1.ximg exists
[Wed May  8 00:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15604_pi14-548_cl_pass1_src3.csv
[Wed May  8 00:13:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15604_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15604_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 00:13:20 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed May  8 00:13:20 2013] fullrun_ccd3_acisf15604_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May  8 00:13:20 2013] Fit fullrun_ccd3_acisf15604_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May  8 00:13:25 2013] Spatial fit model total counts = 39.798600, observed total counts = 44.000000
[Wed May  8 00:13:25 2013] Offset between fit and detection position for source 4 = 0.004208 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.004208 pixels
  Position = (334.7, 896.6) = 10 0 30.42 2 37 35.2
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.5)", rotation angle = 111 (74-148) degrees
  Source counts = 41.2 +/- 6.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Wed May  8 00:13:25 2013] Vigneting correction estimate = 1.000000
[Wed May  8 00:13:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 00:13:25 2013] Assessing source extent using major axis lower bound
[Wed May  8 00:13:25 2013] Source does appear to be extended
[Wed May  8 00:13:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Wed May  8 00:26:59 2013] Writing source region out to fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4_src.reg
[Wed May  8 00:26:59 2013] Extracting stamp from image fullrun_ccd3_acisf15604_pi14-548_cl_sm2.00.img.gz, (310, 872) - (360, 921)
[Wed May  8 00:26:59 2013] Writing fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4.gif
[Wed May  8 00:27:58 2013] Size of ../../acisf15604/products/events/fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4_src.evt.gz[events] = 41 counts
[Wed May  8 00:27:58 2013] Mean chipx,y = (721.76, 849.46)
[Wed May  8 00:27:58 2013] Mean tdetx,y = (4282.54, 3782.76)
[Wed May  8 00:27:58 2013] chipx,y range = (704.00-738.00, 831.00-865.00)
[Wed May  8 00:27:58 2013] Size of ../../acisf15604/products/events/fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Wed May  8 00:27:59 2013] Not generating rmf since there are only 41 counts
[Wed May  8 00:27:59 2013] arf not found, will run specextract
[Wed May  8 00:28:26 2013] ../../acisf15604/products/spectra/fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4.warf not found
[Wed May  8 00:28:26 2013] ../../acisf15604/products/spectra/fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4.wrmf not found
[Wed May  8 00:28:26 2013] Removal of ../../acisf15604/products/spectra/fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4.soff failed
[Wed May  8 00:35:13 2013] Spectrum 4 has only 41 counts, deleting rmf
[Wed May  8 00:35:13 2013] 196.076
[Wed May  8 00:35:18 2013] Updating aperture counts using extracted products
[Wed May  8 00:35:18 2013] Total counts from fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4_src.pi.gz = 41.00
[Wed May  8 00:35:19 2013] Total counts from fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4_bgd.pi.gz = 2.00
[Wed May  8 00:35:19 2013] Got source and background scale factors 0.000001, 0.000011
[Wed May  8 00:35:19 2013] User source parameters:
  Position = (334.7, 896.6) = 10 0 30.42 2 37 35.2
  Extent = 0.5 (0.4-0.7)" x 0.4 (0.3-0.5)", rotation angle = 111 (74-148) degrees
  Source aperture counts = 40.9 +/- 7.5
  Background aperture counts = 0.1
  Rate = 0.002 +/- 0.0004

[Wed May  8 00:35:20 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 00:35:20 2013] Using photon index=1.80, rate=0.00196, arf fullrun_ccd3_acisf15604_pi14-548_pass1_cl_src4.arf
[Wed May  8 00:35:20 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 00:35:20 2013] Updating source flux to 2.4e-14
[Wed May  8 00:35:26 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting