[Sat May 4 06:32:49 2013] Detection parameters: Position = (158.0, 509.4) = 6 33 55.02 17 42 42.5 Extent = 0.8" x 0.5", rotation angle = 39 degrees Source counts = 22.6 +/- 4.9 Background counts = 1.4 Rate = 0.0004 +/- 8e-05 [Sat May 4 06:32:49 2013] Off-axis axis estimate = 4.39' [Sat May 4 07:35:02 2013] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting [Sat May 4 07:35:02 2013] Initial guess for spatial extent in simple fitting = 0.95" [Sat May 4 07:35:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841 [Sat May 4 07:35:02 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.95" [Sat May 4 07:49:30 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass0_src4.ximg exists [Sat May 4 07:49:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15595_pi14-548_cl_pass0_src4.csv [Sat May 4 07:49:30 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass0_src4_1.ximg exists [Sat May 4 07:49:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15595_pi14-548_cl_pass0_src4.csv [Sat May 4 07:49:30 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf15595_pi14-548_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf15595_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 07:49:30 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass0_tfrozen_src4.ximg exists [Sat May 4 07:49:30 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists [Sat May 4 07:49:30 2013] Fit fullrun_ccd3_acisf15595_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly [Sat May 4 08:05:30 2013] Spatial fit model total counts = 25.835600, observed total counts = 29.000000 [Sat May 4 08:05:30 2013] Offset between fit and detection position for source 7 = 0.961994 pixels [Sat May 4 08:05:30 2013] 25.856890 total counts/ 3.936390 bgd. counts: snr = 11.048451 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.961994 pixels Position = (158.7, 510.1) = 6 33 55.01 17 42 42.6 Extent = 0.8 (0.5-1.2)" x 0.3 (0.3-0.4)", rotation angle = 327 (312-343) degrees Source counts = 21.9 +/- 5.1 Background counts = 3.9 Rate = 0.0004 +/- 8e-05 [Sat May 4 08:05:30 2013] Vigneting correction estimate = 1.000000 [Sat May 4 08:05:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 08:05:30 2013] Assessing source extent using major axis lower bound [Sat May 4 08:05:30 2013] Source does appear to be extended [Sat May 4 08:05:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23 [Sat May 4 08:58:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 4 08:58:36 2013] Initial guess for spatial extent in simple fitting = 0.58" [Sat May 4 08:58:36 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.062 [Sat May 4 08:58:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.58" [Sat May 4 09:12:38 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass1_src4.ximg exists [Sat May 4 09:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15595_pi14-548_cl_pass1_src4.csv [Sat May 4 09:12:38 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass1_src4_1.ximg exists [Sat May 4 09:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15595_pi14-548_cl_pass1_src4.csv [Sat May 4 09:12:38 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf15595_pi14-548_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf15595_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 09:12:38 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass1_tfrozen_src4.ximg exists [Sat May 4 09:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15595_pi14-548_cl_pass1_tfrozen_src4.csv [Sat May 4 09:12:38 2013] fullrun_ccd3_acisf15595_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists [Sat May 4 09:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15595_pi14-548_cl_pass1_tfrozen_src4.csv [Sat May 4 09:12:38 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf15595_pi14-548_cl_pass1_tfrozen_src4_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf15595_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 09:35:58 2013] Spatial fit model total counts = 24.262000, observed total counts = 29.000000 [Sat May 4 09:35:58 2013] Offset between fit and detection position for source 7 = 0.047638 pixels [Sat May 4 09:35:58 2013] 23.950970 total counts/ 1.408170 bgd. counts: snr = 18.996794 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.047638 pixels Position = (158.7, 510.1) = 6 33 55.01 17 42 42.6 Extent = 0.9 (0.6-1.2)" x 0.3 (0.3-0.5)", rotation angle = 327 (313-346) degrees Source counts = 22.5 +/- 4.9 Background counts = 1.4 Rate = 0.0004 +/- 8e-05 [Sat May 4 09:35:58 2013] Vigneting correction estimate = 1.000000 [Sat May 4 09:35:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 09:35:58 2013] Assessing source extent using major axis lower bound [Sat May 4 09:35:58 2013] Source does appear to be extended [Sat May 4 09:35:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33 [Sat May 4 10:01:35 2013] Writing source region out to fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7_src.reg [Sat May 4 10:01:35 2013] Extracting stamp from image fullrun_ccd3_acisf15595_pi14-548_cl_sm2.00.img.gz, (117, 469) - (200, 552) [Sat May 4 10:01:35 2013] Writing fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7.gif [Sat May 4 10:03:10 2013] Size of ../../acisf15595/products/events/fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7_src.evt.gz[events] = 23 counts [Sat May 4 10:03:10 2013] Mean chipx,y = (988.26, 511.09) [Sat May 4 10:03:10 2013] Mean tdetx,y = (4620.91, 4049.26) [Sat May 4 10:03:10 2013] chipx,y range = (975.00-1006.00, 487.00-524.00) [Sat May 4 10:03:10 2013] Size of ../../acisf15595/products/events/fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 28 counts [Sat May 4 10:03:11 2013] Not generating rmf since there are only 22 counts [Sat May 4 10:03:11 2013] arf not found, will run specextract [Sat May 4 10:03:35 2013] ../../acisf15595/products/spectra/fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7.warf not found [Sat May 4 10:03:35 2013] ../../acisf15595/products/spectra/fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7.wrmf not found [Sat May 4 10:03:35 2013] Removal of ../../acisf15595/products/spectra/fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7.soff failed [Sat May 4 10:07:53 2013] Spectrum 7 has only 23 counts, deleting rmf [Sat May 4 10:07:53 2013] 193.6 [Sat May 4 10:08:21 2013] Updating aperture counts using extracted products [Sat May 4 10:08:21 2013] Total counts from fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7_src.pi.gz = 23.00 [Sat May 4 10:08:21 2013] Total counts from fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7_bgd.pi.gz = 28.00 [Sat May 4 10:08:21 2013] Got source and background scale factors 0.000001, 0.000030 [Sat May 4 10:08:21 2013] User source parameters: Position = (158.7, 510.1) = 6 33 55.01 17 42 42.6 Extent = 0.9 (0.6-1.2)" x 0.3 (0.3-0.5)", rotation angle = 327 (313-346) degrees Source aperture counts = 22.1 +/- 5.9 Background aperture counts = 0.9 Rate = 0.0004 +/- 9e-05 [Sat May 4 10:08:22 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 10:08:22 2013] Using photon index=1.80, rate=0.000362, arf fullrun_ccd3_acisf15595_pi14-548_pass1_cl_src7.arf [Sat May 4 10:08:22 2013] Assuming count rate is from the 0.20-8.00 bandpass [Sat May 4 10:08:22 2013] Updating source flux to 4.4e-15 [Sat May 4 10:08:31 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting