[Fri May  3 21:07:23 2013] Detection parameters:
  Position = (364.9, 1086.4) = 10 2 33.31 2 27 51.6
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 39.1 +/- 6.4
  Background counts = 1.9
  Rate = 0.002 +/- 0.0003

[Fri May  3 21:07:23 2013] Off-axis axis estimate = 6.03'
[Fri May  3 21:29:57 2013] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Fri May  3 21:29:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 21:29:57 2013] Initial guess for spatial extent in simple fitting = 1.65"
[Fri May  3 21:29:57 2013] source mask rpix=3.3, npix_max = 59, mask sum = 51, frac = 0.862
[Fri May  3 21:29:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.65"
[Fri May  3 21:37:07 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass0_src1.ximg exists
[Fri May  3 21:37:07 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May  3 21:37:07 2013] Fit fullrun_ccd1_acisf15591_pi14-548_cl_pass0_src1 appears to have run properly
[Fri May  3 21:37:07 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 21:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15591_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May  3 21:37:07 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 21:37:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15591_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May  3 21:37:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15591_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15591_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:02:57 2013] Spatial fit model total counts = 51.779200, observed total counts = 51.000000
[Fri May  3 22:02:57 2013] Offset between fit and detection position for source 1 = 0.388426 pixels
[Fri May  3 22:02:57 2013] 51.636700 total counts/ 17.619700 bgd. counts: snr = 8.103950
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.388426 pixels
  Position = (365.0, 1086.8) = 10 2 33.32 2 27 51.5
  Extent = 1.7 (1.1-2.4)" x 0.5 (0.4-0.7)", rotation angle = 338 (327-346) degrees
  Source counts = 34.0 +/- 7.2
  Background counts = 17.6
  Rate = 0.002 +/- 0.0004
[Fri May  3 22:02:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:02:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:02:57 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:02:57 2013] Source does appear to be extended
[Fri May  3 22:02:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Fri May  3 22:20:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 22:20:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 22:20:38 2013] Initial guess for spatial extent in simple fitting = 1.10"
[Fri May  3 22:20:38 2013] source mask rpix=2.2, npix_max = 30, mask sum = 33, frac = 1.100
[Fri May  3 22:20:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.10"
[Fri May  3 22:28:02 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass1_src1.ximg exists
[Fri May  3 22:28:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15591_pi14-548_cl_pass1_src1.csv
[Fri May  3 22:28:02 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass1_src1_1.ximg exists
[Fri May  3 22:28:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15591_pi14-548_cl_pass1_src1.csv
[Fri May  3 22:28:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15591_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15591_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:28:02 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 22:28:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15591_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May  3 22:28:02 2013] fullrun_ccd1_acisf15591_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 22:28:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf15591_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May  3 22:28:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf15591_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf15591_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:54:04 2013] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri May  3 22:54:04 2013] Vigneting correction estimate = 1.000000
[Fri May  3 22:54:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 22:54:04 2013] Assessing source extent using major axis lower bound
[Fri May  3 22:54:04 2013] Source does appear to be extended
[Fri May  3 22:54:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Fri May  3 23:03:16 2013] Writing source region out to fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1_src.reg
[Fri May  3 23:03:16 2013] Extracting stamp from image fullrun_ccd1_acisf15591_pi14-548_cl_sm2.00.img.gz, (287, 1009) - (443, 1165)
[Fri May  3 23:03:16 2013] Writing fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1.gif
[Fri May  3 23:03:18 2013] Size of ../../acisf15591/products/events/fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1_src.evt.gz[events] = 40 counts
[Fri May  3 23:03:18 2013] Mean chipx,y = (639.80, 1011.42)
[Fri May  3 23:03:18 2013] Mean tdetx,y = (4120.57, 4746.80)
[Fri May  3 23:03:18 2013] chipx,y range = (622.00-661.00, 1004.00-1022.00)
[Fri May  3 23:03:18 2013] Size of ../../acisf15591/products/events/fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Fri May  3 23:03:20 2013] Not generating rmf since there are only 34 counts
[Fri May  3 23:03:20 2013] arf not found, will run specextract
[Fri May  3 23:03:47 2013] ../../acisf15591/products/spectra/fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1.warf not found
[Fri May  3 23:03:47 2013] ../../acisf15591/products/spectra/fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1.wrmf not found
[Fri May  3 23:03:47 2013] Removal of ../../acisf15591/products/spectra/fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1.soff failed
[Fri May  3 23:08:14 2013] Spectrum 1 has only 34 counts, deleting rmf
[Fri May  3 23:08:14 2013] 97.2227
[Fri May  3 23:21:06 2013] Updating aperture counts using extracted products
[Fri May  3 23:21:06 2013] Total counts from fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1_src.pi.gz = 40.00
[Fri May  3 23:21:06 2013] Total counts from fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1_bgd.pi.gz = 11.00
[Fri May  3 23:21:06 2013] Got source and background scale factors 0.000003, 0.000106
[Fri May  3 23:21:06 2013] User source parameters:
  Position = (365.0, 1086.8) = 10 2 33.32 2 27 51.5
  Extent = 1.7 (1.1-2.4)" x 0.5 (0.4-0.7)", rotation angle = 338 (327-346) degrees
  Source aperture counts = 39.7 +/- 7.4
  Background aperture counts = 0.3
  Rate = 0.002 +/- 0.0004

[Fri May  3 23:21:07 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 23:21:07 2013] Using photon index=1.80, rate=0.00172, arf fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1.arf
[Fri May  3 23:21:07 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 23:21:07 2013] Updating source flux to 4.2e-14
[Fri May  3 23:21:16 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 23:21:17 2013] acisf15591/analysis//spectral/fullrun_ccd1_acisf15591_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete