[Fri May 10 20:32:19 2013] Detection parameters:
  Position = (608.8, 193.8) = 10 2 4.34 2 31 28.9
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 18.7 +/- 4.4
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003

[Fri May 10 20:32:20 2013] Off-axis axis estimate = 2.19'
[Fri May 10 20:51:27 2013] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri May 10 20:51:27 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Fri May 10 20:51:27 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.120
[Fri May 10 20:51:27 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 0.45"
[Fri May 10 21:07:19 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass0_src6.ximg exists
[Fri May 10 21:07:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15590_pi14-548_cl_pass0_src6.csv
[Fri May 10 21:07:19 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass0_src6_1.ximg exists
[Fri May 10 21:07:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15590_pi14-548_cl_pass0_src6.csv
[Fri May 10 21:07:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15590_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15590_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:07:19 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri May 10 21:07:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15590_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri May 10 21:07:19 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri May 10 21:07:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15590_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri May 10 21:07:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15590_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15590_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:12:27 2013] Spatial fit model total counts = 17.380900, observed total counts = 20.000000
[Fri May 10 21:12:27 2013] Offset between fit and detection position for source 3 = 0.588691 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.588691 pixels
  Position = (609.1, 194.3) = 10 2 4.35 2 31 28.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.0 +/- 4.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri May 10 21:12:28 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:12:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:12:28 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:12:28 2013] Source does appear to be extended
[Fri May 10 21:12:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:29:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 21:29:14 2013] Initial guess for spatial extent in simple fitting = 0.51"
[Fri May 10 21:29:14 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.957
[Fri May 10 21:29:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 0.51"
[Fri May 10 21:43:55 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass1_src6.ximg exists
[Fri May 10 21:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15590_pi14-548_cl_pass1_src6.csv
[Fri May 10 21:43:55 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass1_src6_1.ximg exists
[Fri May 10 21:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15590_pi14-548_cl_pass1_src6.csv
[Fri May 10 21:43:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15590_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15590_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:43:55 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri May 10 21:43:55 2013] fullrun_ccd2_acisf15590_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 10 21:43:55 2013] Fit fullrun_ccd2_acisf15590_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri May 10 21:50:09 2013] Spatial fit model total counts = 18.333700, observed total counts = 20.000000
[Fri May 10 21:50:09 2013] Offset between fit and detection position for source 3 = 0.051873 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.051873 pixels
  Position = (609.1, 194.3) = 10 2 4.35 2 31 28.9
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 19.2 +/- 4.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri May 10 21:50:09 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:50:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:50:09 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:50:09 2013] Source does appear to be extended
[Fri May 10 21:50:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 22:02:13 2013] Writing source region out to fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3_src.reg
[Fri May 10 22:02:13 2013] Extracting stamp from image fullrun_ccd2_acisf15590_pi14-548_cl_sm2.00.img.gz, (586, 171) - (633, 218)
[Fri May 10 22:02:13 2013] Writing fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3.gif
[Fri May 10 22:04:41 2013] Size of ../../acisf15590/products/events/fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3_src.evt.gz[events] = 19 counts
[Fri May 10 22:04:41 2013] Mean chipx,y = (321.68, 923.79)
[Fri May 10 22:04:41 2013] Mean tdetx,y = (3984.79, 3764.32)
[Fri May 10 22:04:41 2013] chipx,y range = (308.00-341.00, 912.00-941.00)
[Fri May 10 22:04:41 2013] Size of ../../acisf15590/products/events/fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1 counts
[Fri May 10 22:04:42 2013] Not generating rmf since there are only 19 counts
[Fri May 10 22:04:42 2013] arf not found, will run specextract
[Fri May 10 22:05:12 2013] ../../acisf15590/products/spectra/fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3.warf not found
[Fri May 10 22:05:12 2013] ../../acisf15590/products/spectra/fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3.wrmf not found
[Fri May 10 22:05:12 2013] Removal of ../../acisf15590/products/spectra/fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3.soff failed
[Fri May 10 22:09:02 2013] Spectrum 3 has only 19 counts, deleting rmf
[Fri May 10 22:09:02 2013] 194.027
[Fri May 10 22:12:53 2013] Updating aperture counts using extracted products
[Fri May 10 22:12:53 2013] Total counts from fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3_src.pi.gz = 19.00
[Fri May 10 22:12:53 2013] Total counts from fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3_bgd.pi.gz = 1.00
[Fri May 10 22:12:53 2013] Got source and background scale factors 0.000001, 0.000010
[Fri May 10 22:12:53 2013] User source parameters:
  Position = (609.1, 194.3) = 10 2 4.35 2 31 28.9
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 18.9 +/- 5.4
  Background aperture counts = 0.1
  Rate = 0.001 +/- 0.0004

[Fri May 10 22:12:54 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 22:12:54 2013] Using photon index=1.80, rate=0.00129, arf fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3.arf
[Fri May 10 22:12:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 22:12:54 2013] Updating source flux to 1.6e-14
[Fri May 10 22:12:58 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 22:12:59 2013] acisf15590/analysis//spectral/fullrun_ccd2_acisf15590_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete