[Thu May  2 22:10:08 2013] Detection parameters:
  Position = (93.4, 621.5) = 3 58 38.10 53 59 19.6
  Extent = 7.5" x 5.4", rotation angle = 7 degrees
  Source counts = 350.4 +/- 22.7
  Background counts = 164.6
  Rate = 0.02 +/- 0.001

[Thu May  2 22:10:08 2013] Off-axis axis estimate = 14.05'
[Thu May  2 22:35:00 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Thu May  2 22:35:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 22:35:00 2013] Initial guess for spatial extent in simple fitting = 8.89"
[Thu May  2 22:35:00 2013] source mask rpix=18.1, npix_max = 1380, mask sum = 1369, frac = 0.992
[Thu May  2 22:35:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.89"
[Thu May  2 22:52:50 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass0_src1.ximg exists
[Thu May  2 22:52:50 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass0_src1_1.ximg exists
[Thu May  2 22:52:50 2013] Fit fullrun_ccd6_acisf15586_pi14-548_cl_pass0_src1 appears to have run properly
[Thu May  2 22:52:50 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu May  2 22:52:50 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  2 22:52:50 2013] Fit fullrun_ccd6_acisf15586_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  2 23:05:02 2013] Spatial fit model total counts = 610.016000, observed total counts = 610.000000
[Thu May  2 23:05:02 2013] Offset between fit and detection position for source 1 = 0.881994 pixels
[Thu May  2 23:05:02 2013] 609.973700 total counts/ 88.323700 bgd. counts: snr = 55.506084
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.881994 pixels
  Position = (92.6, 621.9) = 3 58 38.17 53 59 19.6
  Extent = 11.3 (10.3-12.3)" x 7.5 (6.9-8.2)", rotation angle = 352 (343-359) degrees
  Source counts = 521.6 +/- 24.7
  Background counts = 88.3
  Rate = 0.03 +/- 0.001
[Thu May  2 23:05:02 2013] Vigneting correction estimate = 1.000000
[Thu May  2 23:05:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 23:05:02 2013] Assessing source extent using major axis lower bound
[Thu May  2 23:05:02 2013] Source does appear to be extended
[Thu May  2 23:05:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Thu May  2 23:25:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 23:25:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 23:25:29 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Thu May  2 23:25:29 2013] source mask rpix=19.1, npix_max = 1534, mask sum = 1560, frac = 1.017
[Thu May  2 23:25:29 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.39"
[Thu May  2 23:45:02 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass1_src1.ximg exists
[Thu May  2 23:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15586_pi14-548_cl_pass1_src1.csv
[Thu May  2 23:45:02 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass1_src1_1.ximg exists
[Thu May  2 23:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15586_pi14-548_cl_pass1_src1.csv
[Thu May  2 23:45:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15586_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15586_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 23:45:02 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu May  2 23:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15586_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May  2 23:45:02 2013] fullrun_ccd6_acisf15586_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  2 23:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf15586_pi14-548_cl_pass1_tfrozen_src1.csv
[Thu May  2 23:45:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf15586_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf15586_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 00:02:05 2013] Warning, spatial fit 1 centroid is now closest to src. 5
[Fri May  3 00:02:05 2013] Source 1 in spatial fitting is no longer close to this source
[Fri May  3 00:02:05 2013] Vigneting correction estimate = 1.000000
[Fri May  3 00:02:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 00:02:05 2013] Assessing source extent using major axis lower bound
[Fri May  3 00:02:05 2013] Source does appear to be extended
[Fri May  3 00:02:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Fri May  3 00:14:46 2013] Writing source region out to fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_src.reg
[Fri May  3 00:14:46 2013] Extracting stamp from image fullrun_ccd6_acisf15586_pi14-548_cl_sm2.00.img.gz, (0, 107) - (608, 1101)
[Fri May  3 00:14:46 2013] Writing fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1.gif
[Fri May  3 00:14:48 2013] Size of ../../acisf15586/products/events/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_src.evt.gz[events] = 591 counts
[Fri May  3 00:14:48 2013] Mean chipx,y = (959.64, 615.45)
[Fri May  3 00:14:48 2013] Mean tdetx,y = (3834.64, 2317.45)
[Fri May  3 00:14:48 2013] chipx,y range = (857.00-1023.00, 548.00-681.00)
[Fri May  3 00:14:48 2013] Size of ../../acisf15586/products/events/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 746 counts
[Fri May  3 00:14:49 2013] rmf not found, will run specextract
[Fri May  3 00:14:49 2013] arf not found, will run specextract
[Fri May  3 00:15:22 2013] ../../acisf15586/products/spectra/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1.warf not found
[Fri May  3 00:15:22 2013] ../../acisf15586/products/spectra/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1.wrmf not found
[Fri May  3 00:15:22 2013] Removal of ../../acisf15586/products/spectra/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1.soff failed
[Fri May  3 00:15:29 2013] Keeping rmf generated by specextract
[Fri May  3 00:15:29 2013] 140.415
[Fri May  3 00:15:52 2013] Updating aperture counts using extracted products
[Fri May  3 00:15:52 2013] Total counts from fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_src.pi.gz = 591.00
[Fri May  3 00:15:52 2013] Total counts from fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_bgd.pi.gz = 746.00
[Fri May  3 00:15:52 2013] Got source and background scale factors 0.000262, 0.004634
[Fri May  3 00:15:52 2013] User source parameters:
  Position = (92.6, 621.9) = 3 58 38.17 53 59 19.6
  Extent = 11.3 (10.3-12.3)" x 7.5 (6.9-8.2)", rotation angle = 352 (343-359) degrees
  Source aperture counts = 548.8 +/- 25.3
  Background aperture counts = 42.2
  Rate = 0.03 +/- 0.001

[Fri May  3 00:15:52 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 00:15:52 2013] Using photon index=1.80, rate=0.0258, arf fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1.arf
[Fri May  3 00:15:52 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 00:15:52 2013] Updating source flux to 4.6e-13
[Fri May  3 00:16:08 2013] Reading fit data from acisf15586/analysis//spectral/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_pl.csv
[Fri May  3 00:16:08 2013] Spectral fit parameter nH value = 5.55214e+21
[Fri May  3 00:16:08 2013] Spectral fit parameter PhoIndex value = 5.64701
[Fri May  3 00:16:08 2013] Failed to get F(0.3-8.0) from acisf15586/analysis//spectral/fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May  3 00:16:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 00:16:08 2013] Using Nh = 5.6e+21, photon index=5.65, rate=0.0258, arf fullrun_ccd6_acisf15586_pi14-548_pass1_cl_src1.arf
[Fri May  3 00:16:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 00:16:08 2013] Updating source flux to 2.2e-13