[Thu May 16 06:03:40 2013] Detection parameters:
  Position = (478.7, 863.3) = 3 58 31.97 54 12 20.7
  Extent = 0.7" x 0.5", rotation angle = 39 degrees
  Source counts = 16.7 +/- 4.1
  Background counts = 0.3
  Rate = 0.0008 +/- 0.0002

[Thu May 16 06:03:40 2013] Off-axis axis estimate = 4.06'
[Thu May 16 06:22:40 2013] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Thu May 16 06:22:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 16 06:22:40 2013] Initial guess for spatial extent in simple fitting = 0.85"
[Thu May 16 06:22:40 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.013
[Thu May 16 06:22:40 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.85"
[Thu May 16 06:25:30 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass0_src2.ximg exists
[Thu May 16 06:25:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15585_pi14-548_cl_pass0_src2.csv
[Thu May 16 06:25:30 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass0_src2_1.ximg exists
[Thu May 16 06:25:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15585_pi14-548_cl_pass0_src2.csv
[Thu May 16 06:25:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15585_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15585_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 06:25:30 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu May 16 06:25:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15585_pi14-548_cl_pass0_tfrozen_src2.csv
[Thu May 16 06:25:30 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 16 06:25:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15585_pi14-548_cl_pass0_tfrozen_src2.csv
[Thu May 16 06:25:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15585_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15585_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 06:48:06 2013] Spatial fit model total counts = 17.571800, observed total counts = 19.000000
[Thu May 16 06:48:06 2013] Offset between fit and detection position for source 6 = 0.636445 pixels
[Thu May 16 06:48:06 2013] 18.024060 total counts/ 1.565060 bgd. counts: snr = 13.156427
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.636445 pixels
  Position = (479.1, 863.7) = 3 58 31.98 54 12 20.7
  Extent = 0.9 (0.6-1.4)" x 0.5 (0.3-0.8)", rotation angle = 321 (295-359) degrees
  Source counts = 16.5 +/- 4.2
  Background counts = 1.6
  Rate = 0.0008 +/- 0.0002
[Thu May 16 06:48:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 06:48:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 06:48:06 2013] Assessing source extent using major axis lower bound
[Thu May 16 06:48:06 2013] Source does appear to be extended
[Thu May 16 06:48:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Thu May 16 07:02:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 07:02:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 16 07:02:34 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Thu May 16 07:02:34 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.090
[Thu May 16 07:02:34 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.70"
[Thu May 16 07:04:55 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass1_src2.ximg exists
[Thu May 16 07:04:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15585_pi14-548_cl_pass1_src2.csv
[Thu May 16 07:04:55 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass1_src2_1.ximg exists
[Thu May 16 07:04:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf15585_pi14-548_cl_pass1_src2.csv
[Thu May 16 07:04:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf15585_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf15585_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 07:04:55 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu May 16 07:04:55 2013] fullrun_ccd2_acisf15585_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 16 07:04:55 2013] Fit fullrun_ccd2_acisf15585_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 16 07:46:39 2013] Spatial fit model total counts = 18.448300, observed total counts = 19.000000
[Thu May 16 07:46:39 2013] Offset between fit and detection position for source 6 = 0.260942 pixels
[Thu May 16 07:46:39 2013] 18.834416 total counts/ 0.035116 bgd. counts: snr = 100.320092
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.260942 pixels
  Position = (479.2, 863.5) = 3 58 31.97 54 12 20.6
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 18.8 +/- 4.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Thu May 16 07:46:39 2013] Vigneting correction estimate = 1.000000
[Thu May 16 07:46:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 07:46:39 2013] Assessing source extent using major axis lower bound
[Thu May 16 07:46:39 2013] Source does appear to be extended
[Thu May 16 07:46:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 07:53:05 2013] Writing source region out to fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6_src.reg
[Thu May 16 07:53:05 2013] Extracting stamp from image fullrun_ccd2_acisf15585_pi14-548_cl_sm2.00.img.gz, (441, 825) - (517, 902)
[Thu May 16 07:53:05 2013] Writing fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6.gif
[Thu May 16 07:53:44 2013] Size of ../../acisf15585/products/events/fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6_src.evt.gz[events] = 18 counts
[Thu May 16 07:53:44 2013] Mean chipx,y = (188.22, 549.39)
[Thu May 16 07:53:44 2013] Mean tdetx,y = (3610.39, 3897.78)
[Thu May 16 07:53:44 2013] chipx,y range = (176.00-207.00, 536.00-571.00)
[Thu May 16 07:53:44 2013] Size of ../../acisf15585/products/events/fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 5 counts
[Thu May 16 07:53:45 2013] Not generating rmf since there are only 18 counts
[Thu May 16 07:53:45 2013] arf not found, will run specextract
[Thu May 16 07:54:11 2013] ../../acisf15585/products/spectra/fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6.warf not found
[Thu May 16 07:54:11 2013] ../../acisf15585/products/spectra/fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6.wrmf not found
[Thu May 16 07:54:11 2013] Removal of ../../acisf15585/products/spectra/fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6.soff failed
[Thu May 16 07:56:42 2013] Spectrum 6 has only 19 counts, deleting rmf
[Thu May 16 07:56:42 2013] 183.907
[Thu May 16 07:59:37 2013] Updating aperture counts using extracted products
[Thu May 16 07:59:37 2013] Total counts from fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6_src.pi.gz = 18.00
[Thu May 16 07:59:37 2013] Total counts from fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6_bgd.pi.gz = 5.00
[Thu May 16 07:59:37 2013] Got source and background scale factors 0.000002, 0.000025
[Thu May 16 07:59:37 2013] User source parameters:
  Position = (479.2, 863.5) = 3 58 31.97 54 12 20.6
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source aperture counts = 17.6 +/- 5.3
  Background aperture counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Thu May 16 07:59:37 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 07:59:37 2013] Using photon index=1.80, rate=0.000863, arf fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6.arf
[Thu May 16 07:59:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 07:59:37 2013] Updating source flux to 1.3e-14
[Thu May 16 07:59:46 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 16 07:59:47 2013] acisf15585/analysis//spectral/fullrun_ccd2_acisf15585_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete