[Fri May 10 06:07:25 2013] Detection parameters:
  Position = (98.3, 787.7) = 16 45 6.15 57 36 56.2
  Extent = 0.7" x 0.5", rotation angle = 58 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Fri May 10 06:07:25 2013] Off-axis axis estimate = 2.73'
[Fri May 10 06:48:49 2013] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:48:49 2013] Initial guess for spatial extent in simple fitting = 0.53"
[Fri May 10 06:48:49 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.907
[Fri May 10 06:48:49 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 0.53"
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src15.ximg exists
[Fri May 10 07:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src15.csv
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src15_1.ximg exists
[Fri May 10 07:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src15.csv
[Fri May 10 07:06:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 10 07:06:10 2013] Fit fullrun_ccd7_acisf15584_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri May 10 07:06:16 2013] Spatial fit model total counts = 12.742300, observed total counts = 14.000000
[Fri May 10 07:06:16 2013] Offset between fit and detection position for source 11 = 0.761374 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.761374 pixels
  Position = (98.8, 788.3) = 16 45 6.15 57 36 56.2
  Extent = 1.0 (0.7-1.5)" x 0.5 (0.3-0.8)", rotation angle = 123 (99-144) degrees
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri May 10 07:06:16 2013] Vigneting correction estimate = 1.000000
[Fri May 10 07:06:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 07:06:16 2013] Assessing source extent using major axis lower bound
[Fri May 10 07:06:16 2013] Source does appear to be extended
[Fri May 10 07:06:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Fri May 10 07:42:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 07:42:47 2013] Initial guess for spatial extent in simple fitting = 0.74"
[Fri May 10 07:42:47 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.992
[Fri May 10 07:42:47 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 0.74"
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src15.ximg exists
[Fri May 10 07:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src15.csv
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src15_1.ximg exists
[Fri May 10 07:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src15.csv
[Fri May 10 07:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May 10 07:59:38 2013] Fit fullrun_ccd7_acisf15584_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri May 10 07:59:44 2013] Spatial fit model total counts = 12.631700, observed total counts = 14.000000
[Fri May 10 07:59:44 2013] Offset between fit and detection position for source 11 = 0.045366 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.045366 pixels
  Position = (98.8, 788.3) = 16 45 6.15 57 36 56.2
  Extent = 1.0 (0.7-1.5)" x 0.5 (0.3-0.7)", rotation angle = 124 (95-147) degrees
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri May 10 07:59:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 07:59:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 07:59:44 2013] Assessing source extent using major axis lower bound
[Fri May 10 07:59:44 2013] Source does appear to be extended
[Fri May 10 07:59:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Fri May 10 08:10:12 2013] Writing source region out to fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11_src.reg
[Fri May 10 08:10:12 2013] Extracting stamp from image fullrun_ccd7_acisf15584_pi14-548_cl_sm2.00.img.gz, (54, 744) - (143, 833)
[Fri May 10 08:10:12 2013] Writing fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11.gif
[Fri May 10 08:14:13 2013] Size of ../../acisf15584/products/events/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11_src.evt.gz[events] = 13 counts
[Fri May 10 08:14:13 2013] Mean chipx,y = (24.92, 200.08)
[Fri May 10 08:14:13 2013] Mean tdetx,y = (3941.92, 1902.08)
[Fri May 10 08:14:13 2013] chipx,y range = (11.00-46.00, 186.00-216.00)
[Fri May 10 08:14:13 2013] Size of ../../acisf15584/products/events/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 18 counts
[Fri May 10 08:14:15 2013] Not generating rmf since there are only 12 counts
[Fri May 10 08:14:15 2013] arf not found, will run specextract
[Fri May 10 08:14:22 2013] ../../acisf15584/products/spectra/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11.warf not found
[Fri May 10 08:14:22 2013] ../../acisf15584/products/spectra/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11.wrmf not found
[Fri May 10 08:14:22 2013] Removal of ../../acisf15584/products/spectra/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11.soff failed
[Fri May 10 08:17:31 2013] Spectrum 11 has only 12 counts, deleting rmf
[Fri May 10 08:17:31 2013] 224.595
[Fri May 10 08:17:37 2013] Updating aperture counts using extracted products
[Fri May 10 08:17:37 2013] Total counts from fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11_src.pi.gz = 13.00
[Fri May 10 08:17:38 2013] Total counts from fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11_bgd.pi.gz = 18.00
[Fri May 10 08:17:38 2013] Got source and background scale factors 0.000002, 0.000035
[Fri May 10 08:17:38 2013] User source parameters:
  Position = (98.8, 788.3) = 16 45 6.15 57 36 56.2
  Extent = 1.0 (0.7-1.5)" x 0.5 (0.3-0.7)", rotation angle = 124 (95-147) degrees
  Source aperture counts = 12.2 +/- 4.7
  Background aperture counts = 0.8
  Rate = 0.0005 +/- 0.0002

[Fri May 10 08:17:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 08:17:39 2013] Using photon index=1.80, rate=0.000497, arf fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src11.arf
[Fri May 10 08:17:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 08:17:39 2013] Updating source flux to 4e-15
[Fri May 10 08:17:49 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting