[Fri May 10 06:07:25 2013] Detection parameters:
  Position = (752.2, 742.2) = 16 44 26.11 57 36 33.7
  Extent = 1.1" x 0.5", rotation angle = 147 degrees
  Source counts = 16.8 +/- 4.2
  Background counts = 1.2
  Rate = 0.0007 +/- 0.0002

[Fri May 10 06:07:25 2013] Off-axis axis estimate = 3.64'
[Fri May 10 06:48:49 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:48:49 2013] Initial guess for spatial extent in simple fitting = 0.73"
[Fri May 10 06:48:49 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.019
[Fri May 10 06:48:49 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.73"
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src11.ximg exists
[Fri May 10 07:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src11.csv
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src11_1.ximg exists
[Fri May 10 07:06:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src11.csv
[Fri May 10 07:06:10 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15584_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri May 10 07:06:10 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 10 07:06:10 2013] Fit fullrun_ccd7_acisf15584_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri May 10 07:06:16 2013] Spatial fit model total counts = 16.827300, observed total counts = 19.000000
[Fri May 10 07:06:16 2013] Offset between fit and detection position for source 10 = 1.087905 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.087905 pixels
  Position = (752.3, 743.3) = 16 44 26.13 57 36 34.0
  Extent = 1.4 (1.3-1.5)" x 0.5 (0.4-0.7)", rotation angle = 22 (9-35) degrees
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri May 10 07:06:16 2013] Vigneting correction estimate = 1.000000
[Fri May 10 07:06:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 07:06:16 2013] Assessing source extent using major axis lower bound
[Fri May 10 07:06:16 2013] Source does appear to be extended
[Fri May 10 07:06:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.87
[Fri May 10 07:06:16 2013] Source is asymmetric
[Fri May 10 07:42:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 07:42:47 2013] Initial guess for spatial extent in simple fitting = 0.95"
[Fri May 10 07:42:47 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Fri May 10 07:42:47 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.95"
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src11.ximg exists
[Fri May 10 07:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src11.csv
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src11_1.ximg exists
[Fri May 10 07:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src11.csv
[Fri May 10 07:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15584_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri May 10 07:59:38 2013] fullrun_ccd7_acisf15584_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 10 07:59:38 2013] Fit fullrun_ccd7_acisf15584_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri May 10 07:59:44 2013] Spatial fit model total counts = 17.057900, observed total counts = 19.000000
[Fri May 10 07:59:44 2013] Offset between fit and detection position for source 10 = 0.058893 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.058893 pixels
  Position = (752.3, 743.3) = 16 44 26.14 57 36 34.0
  Extent = 1.4 (1.0-1.9)" x 0.5 (0.3-0.7)", rotation angle = 22 (9-37) degrees
  Source counts = 16.6 +/- 4.1
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri May 10 07:59:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 07:59:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 07:59:44 2013] Assessing source extent using major axis lower bound
[Fri May 10 07:59:44 2013] Source does appear to be extended
[Fri May 10 07:59:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.40
[Fri May 10 08:10:12 2013] Writing source region out to fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10_src.reg
[Fri May 10 08:10:12 2013] Extracting stamp from image fullrun_ccd7_acisf15584_pi14-548_cl_sm2.00.img.gz, (687, 678) - (817, 808)
[Fri May 10 08:10:12 2013] Writing fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10.gif
[Fri May 10 08:13:05 2013] Size of ../../acisf15584/products/events/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10_src.evt.gz[events] = 17 counts
[Fri May 10 08:13:05 2013] Mean chipx,y = (632.29, 462.35)
[Fri May 10 08:13:05 2013] Mean tdetx,y = (4549.29, 2164.35)
[Fri May 10 08:13:05 2013] chipx,y range = (612.00-648.00, 448.00-480.00)
[Fri May 10 08:13:05 2013] Size of ../../acisf15584/products/events/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 49 counts
[Fri May 10 08:13:06 2013] Not generating rmf since there are only 16 counts
[Fri May 10 08:13:06 2013] arf not found, will run specextract
[Fri May 10 08:13:14 2013] ../../acisf15584/products/spectra/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10.warf not found
[Fri May 10 08:13:14 2013] ../../acisf15584/products/spectra/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10.wrmf not found
[Fri May 10 08:13:14 2013] Removal of ../../acisf15584/products/spectra/fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10.soff failed
[Fri May 10 08:17:31 2013] Spectrum 10 has only 17 counts, deleting rmf
[Fri May 10 08:17:31 2013] 224.936
[Fri May 10 08:17:37 2013] Updating aperture counts using extracted products
[Fri May 10 08:17:37 2013] Total counts from fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10_src.pi.gz = 17.00
[Fri May 10 08:17:37 2013] Total counts from fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10_bgd.pi.gz = 49.00
[Fri May 10 08:17:37 2013] Got source and background scale factors 0.000002, 0.000074
[Fri May 10 08:17:37 2013] User source parameters:
  Position = (752.3, 743.3) = 16 44 26.14 57 36 34.0
  Extent = 1.4 (1.0-1.9)" x 0.5 (0.3-0.7)", rotation angle = 22 (9-37) degrees
  Source aperture counts = 15.6 +/- 5.2
  Background aperture counts = 1.4
  Rate = 0.0006 +/- 0.0002

[Fri May 10 08:17:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 08:17:39 2013] Using photon index=1.80, rate=0.000673, arf fullrun_ccd7_acisf15584_pi14-548_pass1_cl_src10.arf
[Fri May 10 08:17:39 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 08:17:39 2013] Updating source flux to 5.2e-15
[Fri May 10 08:17:49 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting