[Sun May  5 09:52:16 2013] Detection parameters:
  Position = (233.9, 445.7) = 2 43 38.15 -59 30 20.7
  Extent = 0.6" x 0.5", rotation angle = 125 degrees
  Source counts = 16.7 +/- 4.1
  Background counts = 0.3
  Rate = 0.0009 +/- 0.0002

[Sun May  5 09:52:17 2013] Off-axis axis estimate = 1.70'
[Sun May  5 10:41:16 2013] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun May  5 10:41:16 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Sun May  5 10:41:16 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.859
[Sun May  5 10:41:16 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.40"
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src5.ximg exists
[Sun May  5 10:50:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src5.csv
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src5_1.ximg exists
[Sun May  5 10:50:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src5.csv
[Sun May  5 10:50:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May  5 10:50:21 2013] Fit fullrun_ccd3_acisf15573_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May  5 11:15:58 2013] Spatial fit model total counts = 17.108600, observed total counts = 18.000000
[Sun May  5 11:15:58 2013] Offset between fit and detection position for source 5 = 0.781467 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.781467 pixels
  Position = (234.2, 446.5) = 2 43 38.17 -59 30 20.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 16.7 +/- 4.1
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun May  5 11:15:58 2013] Vigneting correction estimate = 1.000000
[Sun May  5 11:15:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 11:15:58 2013] Assessing source extent using major axis lower bound
[Sun May  5 11:15:58 2013] Source does appear to be extended
[Sun May  5 11:15:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 11:53:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 11:53:46 2013] Initial guess for spatial extent in simple fitting = 0.46"
[Sun May  5 11:53:46 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.106
[Sun May  5 11:53:46 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.46"
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src5.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src5.csv
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src5_1.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src5.csv
[Sun May  5 12:03:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src5.csv
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src5.csv
[Sun May  5 12:03:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:33:45 2013] Spatial fit model total counts = 16.692900, observed total counts = 18.000000
[Sun May  5 12:33:45 2013] Offset between fit and detection position for source 5 = 0.063763 pixels
[Sun May  5 12:33:45 2013] 16.262600 total counts/ 0.000000 bgd. counts: snr = 176086641906963.375000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.063763 pixels
  Position = (234.2, 446.4) = 2 43 38.17 -59 30 20.6
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sun May  5 12:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:33:45 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:33:45 2013] Source does appear to be extended
[Sun May  5 12:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:45:28 2013] Writing source region out to fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5_src.reg
[Sun May  5 12:45:28 2013] Extracting stamp from image fullrun_ccd3_acisf15573_pi14-548_cl_sm2.00.img.gz, (214, 426) - (255, 467)
[Sun May  5 12:45:28 2013] Writing fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5.gif
[Sun May  5 12:47:56 2013] Size of ../../acisf15573/products/events/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5_src.evt.gz[events] = 16 counts
[Sun May  5 12:47:56 2013] Mean chipx,y = (608.00, 812.69)
[Sun May  5 12:47:56 2013] Mean tdetx,y = (4319.31, 3669.00)
[Sun May  5 12:47:56 2013] chipx,y range = (590.00-623.00, 792.00-825.00)
[Sun May  5 12:47:56 2013] Size of ../../acisf15573/products/events/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 3 counts
[Sun May  5 12:47:57 2013] Not generating rmf since there are only 16 counts
[Sun May  5 12:47:57 2013] arf not found, will run specextract
[Sun May  5 12:48:24 2013] ../../acisf15573/products/spectra/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5.warf not found
[Sun May  5 12:48:24 2013] ../../acisf15573/products/spectra/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5.wrmf not found
[Sun May  5 12:48:24 2013] Removal of ../../acisf15573/products/spectra/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5.soff failed
[Sun May  5 12:52:40 2013] Spectrum 5 has only 16 counts, deleting rmf
[Sun May  5 12:52:40 2013] 200.142
[Sun May  5 12:54:01 2013] Updating aperture counts using extracted products
[Sun May  5 12:54:01 2013] Total counts from fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5_src.pi.gz = 16.00
[Sun May  5 12:54:01 2013] Total counts from fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5_bgd.pi.gz = 3.00
[Sun May  5 12:54:01 2013] Got source and background scale factors 0.000001, 0.000007
[Sun May  5 12:54:01 2013] User source parameters:
  Position = (234.2, 446.4) = 2 43 38.17 -59 30 20.6
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 15.7 +/- 5.1
  Background aperture counts = 0.3
  Rate = 0.0008 +/- 0.0003

[Sun May  5 12:54:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 12:54:03 2013] Using photon index=1.80, rate=0.000864, arf fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5.arf
[Sun May  5 12:54:03 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 12:54:03 2013] Updating source flux to 1e-14
[Sun May  5 12:54:08 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 12:54:09 2013] acisf15573/analysis//spectral/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete