[Sun May  5 09:52:16 2013] Detection parameters:
  Position = (528.2, 208.5) = 2 43 19.10 -59 32 17.3
  Extent = 0.7" x 0.5", rotation angle = 46 degrees
  Source counts = 21.4 +/- 4.7
  Background counts = 0.6
  Rate = 0.001 +/- 0.0002

[Sun May  5 09:52:17 2013] Off-axis axis estimate = 4.48'
[Sun May  5 10:41:16 2013] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sun May  5 10:41:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 10:41:16 2013] Initial guess for spatial extent in simple fitting = 0.98"
[Sun May  5 10:41:16 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Sun May  5 10:41:16 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.98"
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src4.ximg exists
[Sun May  5 10:50:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src4.csv
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src4_1.ximg exists
[Sun May  5 10:50:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src4.csv
[Sun May  5 10:50:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15573_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun May  5 10:50:21 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May  5 10:50:21 2013] Fit fullrun_ccd3_acisf15573_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May  5 11:15:58 2013] Spatial fit model total counts = 21.113900, observed total counts = 23.000000
[Sun May  5 11:15:58 2013] Offset between fit and detection position for source 3 = 0.167829 pixels
[Sun May  5 11:15:58 2013] 22.060318 total counts/ 0.859218 bgd. counts: snr = 22.872135
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.167829 pixels
  Position = (528.2, 208.6) = 2 43 19.13 -59 32 17.4
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 21.2 +/- 4.7
  Background counts = 0.9
  Rate = 0.001 +/- 0.0002
[Sun May  5 11:15:58 2013] Vigneting correction estimate = 1.000000
[Sun May  5 11:15:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 11:15:58 2013] Assessing source extent using major axis lower bound
[Sun May  5 11:15:58 2013] Source does appear to be extended
[Sun May  5 11:15:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 11:53:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 11:53:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 11:53:46 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Sun May  5 11:53:46 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.892
[Sun May  5 11:53:46 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.66"
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src4.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src4.csv
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src4_1.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src4.csv
[Sun May  5 12:03:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15573_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun May  5 12:03:46 2013] fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May  5 12:03:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun May  5 12:03:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15573_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:33:45 2013] Spatial fit model total counts = 18.756400, observed total counts = 23.000000
[Sun May  5 12:33:45 2013] Offset between fit and detection position for source 3 = 0.111148 pixels
[Sun May  5 12:33:45 2013] 19.669669 total counts/ 0.003869 bgd. counts: snr = 316.149989
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.111148 pixels
  Position = (528.2, 208.7) = 2 43 19.13 -59 32 17.4
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 19.7 +/- 4.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun May  5 12:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:33:45 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:33:45 2013] Source does appear to be extended
[Sun May  5 12:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:45:28 2013] Writing source region out to fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3_src.reg
[Sun May  5 12:45:28 2013] Extracting stamp from image fullrun_ccd3_acisf15573_pi14-548_cl_sm2.00.img.gz, (496, 177) - (560, 241)
[Sun May  5 12:45:28 2013] Writing fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3.gif
[Sun May  5 12:47:23 2013] Size of ../../acisf15573/products/events/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3_src.evt.gz[events] = 22 counts
[Sun May  5 12:47:23 2013] Mean chipx,y = (840.00, 508.05)
[Sun May  5 12:47:23 2013] Mean tdetx,y = (4623.95, 3901.00)
[Sun May  5 12:47:23 2013] chipx,y range = (820.00-857.00, 493.00-524.00)
[Sun May  5 12:47:23 2013] Size of ../../acisf15573/products/events/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 5 counts
[Sun May  5 12:47:24 2013] Not generating rmf since there are only 19 counts
[Sun May  5 12:47:24 2013] arf not found, will run specextract
[Sun May  5 12:47:48 2013] ../../acisf15573/products/spectra/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3.warf not found
[Sun May  5 12:47:48 2013] ../../acisf15573/products/spectra/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3.wrmf not found
[Sun May  5 12:47:48 2013] Removal of ../../acisf15573/products/spectra/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3.soff failed
[Sun May  5 12:52:40 2013] Spectrum 3 has only 20 counts, deleting rmf
[Sun May  5 12:52:40 2013] 193.131
[Sun May  5 12:54:01 2013] Updating aperture counts using extracted products
[Sun May  5 12:54:01 2013] Total counts from fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3_src.pi.gz = 22.00
[Sun May  5 12:54:01 2013] Total counts from fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3_bgd.pi.gz = 5.00
[Sun May  5 12:54:01 2013] Got source and background scale factors 0.000001, 0.000018
[Sun May  5 12:54:01 2013] User source parameters:
  Position = (528.2, 208.7) = 2 43 19.13 -59 32 17.4
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 21.6 +/- 5.8
  Background aperture counts = 0.4
  Rate = 0.001 +/- 0.0003

[Sun May  5 12:54:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 12:54:02 2013] Using photon index=1.80, rate=0.00104, arf fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3.arf
[Sun May  5 12:54:02 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 12:54:03 2013] Updating source flux to 1.3e-14
[Sun May  5 12:54:08 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 12:54:09 2013] acisf15573/analysis//spectral/fullrun_ccd3_acisf15573_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete