[Fri Aug 14 00:20:56 2015] Detection parameters:
  Position = (615.8, 704.6) = 1 10 10.12 -72 44 0.3
  Extent = 0.8" x 0.5", rotation angle = 102 degrees
  Source counts = 13.8 +/- 3.7
  Background counts = 0.2
  Rate = 0.0008 +/- 0.0002

[Fri Aug 14 00:20:57 2015] Off-axis axis estimate = 4.70'
[Fri Aug 14 00:21:26 2015] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:21:26 2015] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Aug 14 00:21:26 2015] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.879
[Fri Aug 14 00:21:26 2015] Giving source the simple spatial ID 5 for pass 0, mean size = 1.07"
[Fri Aug 14 00:21:26 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass0_src5.ximg exists
[Fri Aug 14 00:21:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15497_pi14-548_cl_pass0_src5.csv
[Fri Aug 14 00:21:26 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Aug 14 00:21:26 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15497_pi14-548_cl_pass0_src5.csv
[Fri Aug 14 00:21:26 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15497_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15497_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:21:26 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 14 00:21:26 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 14 00:21:26 2015] Fit fullrun_ccd3_acisf15497_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug 14 00:21:30 2015] Spatial fit model total counts = 13.880400, observed total counts = 15.000000
[Fri Aug 14 00:21:30 2015] Offset between fit and detection position for source 3 = 0.711956 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.711956 pixels
  Position = (616.3, 705.1) = 1 10 10.14 -72 44 0.9
  Extent = 1.1 (0.8-1.6)" x 0.3 (0.3-0.5)", rotation angle = 102 (92-114) degrees
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Aug 14 00:21:30 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:21:30 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:21:30 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 00:21:30 2015] Source does appear to be extended
[Fri Aug 14 00:21:30 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Fri Aug 14 00:21:30 2015] Source is asymmetric
[Fri Aug 14 00:21:43 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:21:43 2015] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Aug 14 00:21:43 2015] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.031
[Fri Aug 14 00:21:43 2015] Giving source the simple spatial ID 5 for pass 1, mean size = 0.72"
[Fri Aug 14 00:21:43 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass1_src5.ximg exists
[Fri Aug 14 00:21:43 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15497_pi14-548_cl_pass1_src5.csv
[Fri Aug 14 00:21:43 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Aug 14 00:21:43 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15497_pi14-548_cl_pass1_src5.csv
[Fri Aug 14 00:21:43 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15497_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15497_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:21:43 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 14 00:21:43 2015] fullrun_ccd3_acisf15497_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 14 00:21:43 2015] Fit fullrun_ccd3_acisf15497_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug 14 00:21:47 2015] Spatial fit model total counts = 13.329300, observed total counts = 15.000000
[Fri Aug 14 00:21:47 2015] Offset between fit and detection position for source 3 = 0.071923 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.071923 pixels
  Position = (616.3, 705.0) = 1 10 10.14 -72 44 0.9
  Extent = 1.1 (0.8-1.5)" x 0.3 (0.2-0.5)", rotation angle = 102 (91-114) degrees
  Source counts = 13.3 +/- 3.7
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Aug 14 00:21:47 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:21:47 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:21:47 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 00:21:47 2015] Source does appear to be extended
[Fri Aug 14 00:21:47 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62
[Fri Aug 14 00:21:47 2015] Source is asymmetric