[Sun Jun 21 12:05:05 2015] Detection parameters:
  Position = (705.3, 976.5) = 13 29 50.18 47 14 19.7
  Extent = 0.6" x 0.5", rotation angle = 81 degrees
  Source counts = 11.3 +/- 3.6
  Background counts = 1.7
  Rate = 0.0003 +/- 9e-05

[Sun Jun 21 12:05:06 2015] Off-axis axis estimate = 4.11'
[Sun Jun 21 12:21:37 2015] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun 21 12:21:37 2015] Initial guess for spatial extent in simple fitting = 0.86"
[Sun Jun 21 12:21:37 2015] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.232
[Sun Jun 21 12:21:37 2015] Giving source the simple spatial ID 83 for pass 0, mean size = 0.86"
[Sun Jun 21 13:17:37 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src83.ximg exists
[Sun Jun 21 13:17:37 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src83.csv
[Sun Jun 21 13:17:37 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src83_1.ximg exists
[Sun Jun 21 13:17:37 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src83.csv
[Sun Jun 21 13:17:37 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 21 13:17:38 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src83.ximg exists
[Sun Jun 21 13:17:38 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src83.csv
[Sun Jun 21 13:17:38 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src83_1.ximg exists
[Sun Jun 21 13:17:38 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src83.csv
[Sun Jun 21 13:17:38 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 21 13:17:54 2015] Spatial fit model total counts = 15.159900, observed total counts = 18.000000
[Sun Jun 21 13:17:54 2015] Offset between fit and detection position for source 79 = 0.741177 pixels
[Sun Jun 21 13:17:54 2015] 14.820590 total counts/ 2.290490 bgd. counts: snr = 8.279237
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.741177 pixels
  Position = (705.9, 976.9) = 13 29 50.19 47 14 19.7
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 12.5 +/- 3.8
  Background counts = 2.3
  Rate = 0.0003 +/- 9e-05
[Sun Jun 21 13:17:54 2015] Vigneting correction estimate = 1.000000
[Sun Jun 21 13:17:54 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 21 13:17:54 2015] Assessing source extent using major axis lower bound
[Sun Jun 21 13:17:54 2015] Source does appear to be extended
[Sun Jun 21 13:17:54 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 21 13:17:54 2015] Deleting source due to low Poisson probability 0.9