[Sun Jun 21 12:05:04 2015] Detection parameters:
  Position = (868.4, 542.5) = 13 29 42.32 47 10 46.0
  Extent = 0.6" x 0.5", rotation angle = 128 degrees
  Source counts = 22.9 +/- 5.0
  Background counts = 2.1
  Rate = 0.0006 +/- 0.0001

[Sun Jun 21 12:05:06 2015] Off-axis axis estimate = 3.66'
[Sun Jun 21 12:21:37 2015] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Sun Jun 21 12:21:37 2015] Initial guess for spatial extent in simple fitting = 0.73"
[Sun Jun 21 12:21:37 2015] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.011
[Sun Jun 21 12:21:37 2015] Giving source the simple spatial ID 55 for pass 0, mean size = 0.73"
[Sun Jun 21 13:17:37 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src55.ximg exists
[Sun Jun 21 13:17:37 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src55_1.ximg exists
[Sun Jun 21 13:17:37 2015] Fit fullrun_ccd7_acisf15496_pi14-548_cl_pass0_src55 appears to have run properly
[Sun Jun 21 13:17:37 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Sun Jun 21 13:17:37 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Jun 21 13:17:37 2015] Fit fullrun_ccd7_acisf15496_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Jun 21 13:17:54 2015] Spatial fit model total counts = 41.348400, observed total counts = 45.000000
[Sun Jun 21 13:17:54 2015] Offset between fit and detection position for source 46 = 0.918769 pixels
[Sun Jun 21 13:17:54 2015] 26.455800 total counts/ 2.892900 bgd. counts: snr = 13.853580
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.918769 pixels
  Position = (868.8, 543.3) = 13 29 42.32 47 10 46.3
  Extent = 0.8 (0.5-1.2)" x 0.4 (0.3-0.6)", rotation angle = 314 (282-346) degrees
  Source counts = 23.6 +/- 5.1
  Background counts = 2.9
  Rate = 0.0006 +/- 0.0001
[Sun Jun 21 13:17:54 2015] Vigneting correction estimate = 1.000000
[Sun Jun 21 13:17:54 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 21 13:17:54 2015] Assessing source extent using major axis lower bound
[Sun Jun 21 13:17:54 2015] Source does appear to be extended
[Sun Jun 21 13:17:54 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Sun Jun 21 13:33:26 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 21 13:33:26 2015] Initial guess for spatial extent in simple fitting = 0.60"
[Sun Jun 21 13:33:26 2015] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.021
[Sun Jun 21 13:33:26 2015] Giving source the simple spatial ID 54 for pass 1, mean size = 0.60"
[Sun Jun 21 14:27:07 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass1_src54.ximg exists
[Sun Jun 21 14:27:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass1_src54.csv
[Sun Jun 21 14:27:07 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass1_src54_1.ximg exists
[Sun Jun 21 14:27:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass1_src54.csv
[Sun Jun 21 14:27:07 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15496_pi14-548_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15496_pi14-548_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 21 14:27:08 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass1_tfrozen_src54.ximg exists
[Sun Jun 21 14:27:08 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass1_tfrozen_src54.csv
[Sun Jun 21 14:27:08 2015] fullrun_ccd7_acisf15496_pi14-548_cl_pass1_tfrozen_src54_1.ximg exists
[Sun Jun 21 14:27:08 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15496_pi14-548_cl_pass1_tfrozen_src54.csv
[Sun Jun 21 14:27:08 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15496_pi14-548_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15496_pi14-548_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 21 14:27:22 2015] Spatial fit model total counts = 38.283300, observed total counts = 43.000000
[Sun Jun 21 14:27:22 2015] Offset between fit and detection position for source 46 = 0.213722 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.213722 pixels
  Position = (868.9, 543.1) = 13 29 42.32 47 10 46.2
  Extent = 0.8 (0.6-1.1)" x 0.4 (0.3-0.6)", rotation angle = 135 (115-149) degrees
  Source counts = 23.7 +/- 4.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sun Jun 21 14:27:22 2015] Vigneting correction estimate = 1.000000
[Sun Jun 21 14:27:22 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 21 14:27:22 2015] Assessing source extent using major axis lower bound
[Sun Jun 21 14:27:22 2015] Source does appear to be extended
[Sun Jun 21 14:27:22 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10