[Sun Jun 21 11:44:52 2015] Detection parameters:
  Position = (289.5, 397.3) = 10 43 35.11 24 53 10.4
  Extent = 1.0" x 0.5", rotation angle = 18 degrees
  Source counts = 12.9 +/- 3.7
  Background counts = 1.1
  Rate = 0.0003 +/- 8e-05

[Sun Jun 21 11:44:53 2015] Off-axis axis estimate = 5.53'
[Sun Jun 21 11:45:52 2015] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun 21 11:45:52 2015] Initial guess for spatial extent in simple fitting = 1.41"
[Sun Jun 21 11:45:52 2015] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Sun Jun 21 11:45:52 2015] Giving source the simple spatial ID 26 for pass 0, mean size = 1.41"
[Sun Jun 21 11:45:54 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass0_src26.ximg exists
[Sun Jun 21 11:45:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15387_pi14-548_cl_pass0_src26.csv
[Sun Jun 21 11:45:54 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass0_src26_1.ximg exists
[Sun Jun 21 11:45:54 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15387_pi14-548_cl_pass0_src26.csv
[Sun Jun 21 11:45:54 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15387_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15387_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 21 11:45:55 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sun Jun 21 11:45:55 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jun 21 11:45:55 2015] Fit fullrun_ccd3_acisf15387_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Jun 21 11:46:07 2015] Spatial fit model total counts = 13.795800, observed total counts = 15.000000
[Sun Jun 21 11:46:07 2015] Offset between fit and detection position for source 34 = 0.572692 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.572692 pixels
  Position = (289.9, 397.7) = 10 43 35.12 24 53 10.4
  Extent = 1.4 (1.0-2.3)" x 0.7 (0.5-1.0)", rotation angle = 18 (352-43) degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Sun Jun 21 11:46:07 2015] Vigneting correction estimate = 1.000000
[Sun Jun 21 11:46:07 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 21 11:46:07 2015] Assessing source extent using major axis lower bound
[Sun Jun 21 11:46:07 2015] Source does appear to be extended
[Sun Jun 21 11:46:07 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Sun Jun 21 11:46:25 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 21 11:46:25 2015] Initial guess for spatial extent in simple fitting = 1.01"
[Sun Jun 21 11:46:25 2015] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Sun Jun 21 11:46:25 2015] Giving source the simple spatial ID 26 for pass 1, mean size = 1.01"
[Sun Jun 21 11:46:27 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass1_src26.ximg exists
[Sun Jun 21 11:46:27 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15387_pi14-548_cl_pass1_src26.csv
[Sun Jun 21 11:46:27 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass1_src26_1.ximg exists
[Sun Jun 21 11:46:27 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15387_pi14-548_cl_pass1_src26.csv
[Sun Jun 21 11:46:27 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15387_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15387_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 21 11:46:27 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sun Jun 21 11:46:27 2015] fullrun_ccd3_acisf15387_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jun 21 11:46:27 2015] Fit fullrun_ccd3_acisf15387_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Jun 21 11:46:39 2015] Spatial fit model total counts = 13.415700, observed total counts = 15.000000
[Sun Jun 21 11:46:39 2015] Offset between fit and detection position for source 34 = 0.054888 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.054888 pixels
  Position = (289.9, 397.8) = 10 43 35.12 24 53 10.4
  Extent = 1.4 (1.0-2.0)" x 0.7 (0.5-1.0)", rotation angle = 16 (351-41) degrees
  Source counts = 13.3 +/- 3.6
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Sun Jun 21 11:46:39 2015] Vigneting correction estimate = 1.000000
[Sun Jun 21 11:46:39 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 21 11:46:39 2015] Assessing source extent using major axis lower bound
[Sun Jun 21 11:46:39 2015] Source does appear to be extended
[Sun Jun 21 11:46:39 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sun Jun 21 12:08:30 2015] Writing source region out to fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34_src.reg
[Sun Jun 21 12:08:30 2015] Extracting stamp from image fullrun_ccd3_acisf15387_pi14-548_cl_sm2.00.img.gz, (225, 333) - (355, 463)
[Sun Jun 21 12:08:30 2015] Writing fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34.gif
[Sun Jun 21 12:26:07 2015] Size of ../../acisf15387/products/events/fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34_src.evt.gz[events] = 14 counts
[Sun Jun 21 12:26:07 2015] Mean chipx,y = (750.50, 379.93)
[Sun Jun 21 12:26:07 2015] Mean tdetx,y = (4752.07, 3811.50)
[Sun Jun 21 12:26:07 2015] chipx,y range = (731.00-772.00, 363.00-399.00)
[Sun Jun 21 12:26:07 2015] Size of ../../acisf15387/products/events/fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 45 counts
[Sun Jun 21 12:26:08 2015] Not generating rmf since there are only 13 counts
[Sun Jun 21 12:26:08 2015] arf not found, will run specextract
[Sun Jun 21 12:26:39 2015] ../../acisf15387/products/spectra/fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34.warf not found
[Sun Jun 21 12:26:39 2015] ../../acisf15387/products/spectra/fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34.wrmf not found
[Sun Jun 21 12:26:39 2015] Removal of ../../acisf15387/products/spectra/fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34.soff failed
[Sun Jun 21 12:37:35 2015] Spectrum 34 has only 13 counts, deleting rmf
[Sun Jun 21 12:37:35 2015] 183.643
[Sun Jun 21 12:38:11 2015] Updating aperture counts using extracted products
[Sun Jun 21 12:38:11 2015] Total counts from fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34_src.pi.gz = 14.00
[Sun Jun 21 12:38:11 2015] Total counts from fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34_bgd.pi.gz = 45.00
[Sun Jun 21 12:38:11 2015] Got source and background scale factors 0.000003, 0.000073
[Sun Jun 21 12:38:11 2015] User source parameters:
  Position = (289.9, 397.8) = 10 43 35.12 24 53 10.4
  Extent = 1.4 (1.0-2.0)" x 0.7 (0.5-1.0)", rotation angle = 16 (351-41) degrees
  Source aperture counts = 12.1 +/- 4.8
  Background aperture counts = 1.9
  Rate = 0.0003 +/- 0.0001

[Sun Jun 21 12:38:14 2015] Calculating source flux in energy range 0.30-8.00
[Sun Jun 21 12:38:14 2015] Using photon index=1.80, rate=0.00028, arf fullrun_ccd3_acisf15387_pi14-548_pass1_cl_src34.arf
[Sun Jun 21 12:38:14 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jun 21 12:38:14 2015] Updating source flux to 3.8e-15
[Sun Jun 21 12:38:29 2015] Source 34 has fewer than 100.000000 counts, skipping spectral fitting