[Fri Aug 14 00:24:55 2015] Detection parameters:
  Position = (1095.0, 667.5) = 0 42 36.67 41 13 50.7
  Extent = 0.8" x 0.5", rotation angle = 7 degrees
  Source counts = 10.6 +/- 3.5
  Background counts = 1.4
  Rate = 0.001 +/- 0.0003

[Fri Aug 14 00:24:55 2015] Off-axis axis estimate = 2.60'
[Fri Aug 14 00:25:32 2015] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:25:32 2015] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Aug 14 00:25:32 2015] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.278
[Fri Aug 14 00:25:32 2015] Giving source the simple spatial ID 62 for pass 0, mean size = 0.51"
[Fri Aug 14 00:25:33 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass0_src62.ximg exists
[Fri Aug 14 00:25:33 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass0_src62_1.ximg exists
[Fri Aug 14 00:25:33 2015] Fit fullrun_ccd7_acisf15267_pi14-548_cl_pass0_src62 appears to have run properly
[Fri Aug 14 00:25:34 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass0_tfrozen_src62.ximg exists
[Fri Aug 14 00:25:34 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass0_tfrozen_src62_1.ximg exists
[Fri Aug 14 00:25:34 2015] Fit fullrun_ccd7_acisf15267_pi14-548_cl_pass0_tfrozen_src62 appears to have run properly
[Fri Aug 14 00:25:48 2015] Spatial fit model total counts = 12.206300, observed total counts = 12.000000
[Fri Aug 14 00:25:48 2015] Offset between fit and detection position for source 64 = 0.708134 pixels
[Fri Aug 14 00:25:48 2015] 12.196400 total counts/ 0.000000 bgd. counts: snr = 53962515542631.984375
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.708134 pixels
  Position = (1095.5, 668.0) = 0 42 36.67 41 13 50.7
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Aug 14 00:25:48 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:25:48 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:25:48 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 00:25:48 2015] Source does appear to be extended
[Fri Aug 14 00:25:48 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 14 00:26:05 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 00:26:05 2015] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Aug 14 00:26:05 2015] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.977
[Fri Aug 14 00:26:05 2015] Giving source the simple spatial ID 62 for pass 1, mean size = 0.87"
[Fri Aug 14 00:26:06 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass1_src62.ximg exists
[Fri Aug 14 00:26:06 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15267_pi14-548_cl_pass1_src62.csv
[Fri Aug 14 00:26:06 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass1_src62_1.ximg exists
[Fri Aug 14 00:26:06 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15267_pi14-548_cl_pass1_src62.csv
[Fri Aug 14 00:26:06 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15267_pi14-548_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15267_pi14-548_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:26:07 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass1_tfrozen_src62.ximg exists
[Fri Aug 14 00:26:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15267_pi14-548_cl_pass1_tfrozen_src62.csv
[Fri Aug 14 00:26:07 2015] fullrun_ccd7_acisf15267_pi14-548_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Aug 14 00:26:07 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf15267_pi14-548_cl_pass1_tfrozen_src62.csv
[Fri Aug 14 00:26:07 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf15267_pi14-548_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf15267_pi14-548_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 00:26:20 2015] Spatial fit model total counts = 11.626300, observed total counts = 13.000000
[Fri Aug 14 00:26:20 2015] Offset between fit and detection position for source 64 = 0.103034 pixels
[Fri Aug 14 00:26:20 2015] 11.825400 total counts/ 0.000000 bgd. counts: snr = 14183072.697105
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.103034 pixels
  Position = (1095.5, 667.9) = 0 42 36.67 41 13 50.6
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 11.8 +/- 3.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Aug 14 00:26:20 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 00:26:20 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 00:26:20 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 00:26:20 2015] Source does appear to be extended
[Fri Aug 14 00:26:20 2015] Computing asymmetry using major and minor axis, asym = 1.00