[Fri Aug  9 17:37:00 2013] Detection parameters:
  Position = (868.9, 294.4) = 9 58 23.33 2 26 28.9
  Extent = 0.6" x 0.5", rotation angle = 85 degrees
  Source counts = 19.0 +/- 4.5
  Background counts = 1.0
  Rate = 0.0004 +/- 9e-05

[Fri Aug  9 17:37:00 2013] Off-axis axis estimate = 3.00'
[Fri Aug  9 18:52:03 2013] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Aug  9 18:52:03 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Aug  9 18:52:03 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.066
[Fri Aug  9 18:52:03 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.58"
[Fri Aug  9 19:07:12 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass0_src10.ximg exists
[Fri Aug  9 19:07:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass0_src10.csv
[Fri Aug  9 19:07:12 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Aug  9 19:07:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass0_src10.csv
[Fri Aug  9 19:07:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15242_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15242_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 19:07:12 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug  9 19:07:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass0_tfrozen_src10.csv
[Fri Aug  9 19:07:12 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug  9 19:07:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass0_tfrozen_src10.csv
[Fri Aug  9 19:07:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15242_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15242_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 19:07:21 2013] Spatial fit model total counts = 18.763000, observed total counts = 22.000000
[Fri Aug  9 19:07:21 2013] Offset between fit and detection position for source 17 = 0.749661 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.749661 pixels
  Position = (869.5, 294.9) = 9 58 23.33 2 26 28.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 19.6 +/- 4.4
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Fri Aug  9 19:07:21 2013] Vigneting correction estimate = 1.000000
[Fri Aug  9 19:07:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  9 19:07:21 2013] Assessing source extent using major axis lower bound
[Fri Aug  9 19:07:21 2013] Source does appear to be extended
[Fri Aug  9 19:07:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  9 20:34:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  9 20:34:33 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Fri Aug  9 20:34:33 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.892
[Fri Aug  9 20:34:33 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.66"
[Fri Aug  9 20:47:14 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass1_src10.ximg exists
[Fri Aug  9 20:47:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass1_src10.csv
[Fri Aug  9 20:47:14 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Aug  9 20:47:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass1_src10.csv
[Fri Aug  9 20:47:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15242_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15242_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 20:47:14 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug  9 20:47:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Aug  9 20:47:14 2013] fullrun_ccd3_acisf15242_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug  9 20:47:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf15242_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri Aug  9 20:47:14 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf15242_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf15242_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  9 20:47:24 2013] Spatial fit model total counts = 18.497700, observed total counts = 22.000000
[Fri Aug  9 20:47:24 2013] Offset between fit and detection position for source 17 = 0.070016 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.070016 pixels
  Position = (869.4, 294.9) = 9 58 23.33 2 26 28.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 19.2 +/- 4.4
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Fri Aug  9 20:47:24 2013] Vigneting correction estimate = 1.000000
[Fri Aug  9 20:47:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  9 20:47:24 2013] Assessing source extent using major axis lower bound
[Fri Aug  9 20:47:24 2013] Source does appear to be extended
[Fri Aug  9 20:47:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  9 21:17:56 2013] Writing source region out to fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17_src.reg
[Fri Aug  9 21:17:56 2013] Extracting stamp from image fullrun_ccd3_acisf15242_pi14-548_cl_sm2.00.img.gz, (840, 265) - (899, 325)
[Fri Aug  9 21:17:56 2013] Writing fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17.gif
[Fri Aug  9 21:23:14 2013] Size of ../../acisf15242/products/events/fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17_src.evt.gz[events] = 20 counts
[Fri Aug  9 21:23:14 2013] Mean chipx,y = (594.50, 932.65)
[Fri Aug  9 21:23:14 2013] Mean tdetx,y = (4199.35, 3655.50)
[Fri Aug  9 21:23:14 2013] chipx,y range = (576.00-608.00, 911.00-946.00)
[Fri Aug  9 21:23:14 2013] Size of ../../acisf15242/products/events/fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 11 counts
[Fri Aug  9 21:23:16 2013] Not generating rmf since there are only 19 counts
[Fri Aug  9 21:23:16 2013] arf not found, will run specextract
[Fri Aug  9 21:23:43 2013] ../../acisf15242/products/spectra/fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17.warf not found
[Fri Aug  9 21:23:43 2013] ../../acisf15242/products/spectra/fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17.wrmf not found
[Fri Aug  9 21:23:43 2013] Removal of ../../acisf15242/products/spectra/fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17.soff failed
[Fri Aug  9 21:26:35 2013] Spectrum 17 has only 19 counts, deleting rmf
[Fri Aug  9 21:26:35 2013] 189.92
[Fri Aug  9 21:26:47 2013] Updating aperture counts using extracted products
[Fri Aug  9 21:26:47 2013] Total counts from fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17_src.pi.gz = 20.00
[Fri Aug  9 21:26:47 2013] Total counts from fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17_bgd.pi.gz = 11.00
[Fri Aug  9 21:26:47 2013] Got source and background scale factors 0.000001, 0.000014
[Fri Aug  9 21:26:47 2013] User source parameters:
  Position = (869.4, 294.9) = 9 58 23.33 2 26 28.9
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 19.0 +/- 5.6
  Background aperture counts = 1.0
  Rate = 0.0004 +/- 0.0001

[Fri Aug  9 21:26:47 2013] Calculating source flux in energy range 0.30-8.00
[Fri Aug  9 21:26:47 2013] Using photon index=1.80, rate=0.000388, arf fullrun_ccd3_acisf15242_pi14-548_pass1_cl_src17.arf
[Fri Aug  9 21:26:47 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug  9 21:26:47 2013] Updating source flux to 4.8e-15
[Fri Aug  9 21:27:01 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting